Blaze9824 Posted July 16, 2016 Report Posted July 16, 2016 Need some help guys, what kind of tape is everyone using to mask off sections of their helmets before painting? I got some "3M Safe release with Edge lock" and it sucks!! I have read some people use frog tape but both have left me with bleed under when painting the black trim around the forehead section. Any help would be greatly appreciated as I am using rattle cans for painting ( don't have a airbrush set yet). Quote
gmrhodes13[Staff] Posted July 16, 2016 Report Posted July 16, 2016 We use blue tape here which I believe is the same as the frog tape at your end. There is a good tip for bleed through here http://www.whitearmor.net/forum/topic/23204-tip-on-tube-stripe-painting-with-no-bleed-through/, pictures missing but will get the idea Quote
sskunky Posted July 17, 2016 Report Posted July 17, 2016 (edited) Get this stuff. It doesn't bleed. You can thank me after. Not sure why it's not posting the image but click the link and you'll see it. Edited January 7, 2022 by gmrhodes13 photo updated 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.