TOM R
-
Posts
67 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by TOM R
-
-
i had found a site where they were modding a fiberglass articulated 1:1 made by a company in the phillipeans now i can't find the link and search for the company turned up nothing
-
does anyone know the name of the company that makes the life sized battle droid? or a kit
-
GOT MINE A FEW WEEKS BACK BUT i HAVE MOVED SINCE THEN so sorry for the delay saying I got em, look great can't wait to wire em up, is there a tutorial to wire these to the walmart voice changer?
-
next weekend for anyone intersted, i will be there wandering around working
-
i ripped out the padding and painted the helmet flat black inside, then after trying several interiors I ended up buying a batting hlemet from walmart for like $10 +? and installed it with industrial velcro, i never removed the glue remanants from the old padding
-
I would like a pair on 2 tone with speakers
-
this may be of intrest to some of you guys, i think ghostbusters costume group will be there and rubies is suppposed to have some reps there also my friend is co hosting this event and I will be there helping out
here is the link
-
WHAT I am using now is pretty much the same as the knee padding and while i love how guys helmets look with the knee pads i think it would get uncomfortable after an hour or so, 12 batting helmet is that the padding only or the whole helmet? I looked at some sports helmets but was unsure if the padding came out without tearing it, i also saw pics of the nonskid wrapped foam but is it able to be removed so you can clean the foam from all the sweat it soaks up?
-
ok i must have a smallllll head since i seem to have a hard time finding something i can use to pad my mrce bucket, the stuff it came with left the helmet loose and almost sitting on my shoulders, while i was staring at the inside of the brow, i am 5'9"+ so i am an average size person, for now I bought a big neopreene kneeling pad for gardening and cut it up and shoved it in the helmet but it needs alot of refinement
so heres the question what have you used and WHERE CAN YOU BUY IT, since i see lots of pics but no idea what it is or where purchased, pics are good too
-
DarkHammer said:
just did the radio shack run my self for my RT,,went a little different rout though..2 9v..and three fans...gonna work on the voice next..if you beat me to it please post some pics...i just bought the little white preamp speaker box from there and cant seem to get it to work? i dont know if i am using something or doing something wrong? ...if any body else has had this same issue please let me know ASAP..for i am trying to get ready for CLONE WARS as well...
over
what padding did you use in here?
-
i was unable to login here for a while but bro I want to thank you and the other guys for helping me some with my armor, hopefuly we can all get together again soon and i can get some more done, for the $400 I paid for this new in box i am not sure i could have bought and assembled a fan made for the same and still would have had to do all the mods and fitting, this armor is thick heavy gauge abs not thin like some of the fan mades i have seen not that that makes a difference just wanted guys to know it is a rigid material that they used i was given a pair of calves and eventualy may start to fase out the rubies pats in lou of fan made so I match everyone else depending on how well we can make this set fit
-
i also have the rubies, first thing is dump the helmet and get the mrce it is well worth the $100, next is start trimming back the openings on the pieces so they don't cut into your skin when you are trying to mov, you will need to cut off elastic and addvelcro, webbing, and snaps in places, worst part about this set is there is no left right on the arms you get 2 rights, the chest and back look small, and the legs are huge, it is like they didn't copy 1 sized set of armor they just grabbed a bunch of pieces from a pile and copied em, legs are for a big person chest for a small person abs and arms for an average person, i took mine to a ner build and we worked on it some but i still need to do more they took pics for comparison but don't know if they ever got posted, i might end up having to buy another armor eventualy
-
ok I broke one of my tips while removing them so if anyone has tips they removed from their mrce helmet let me know i only need 1 but will take a pair if need be thanks
-
ok then i won't be cutting it, i think the brow would be down over the eyes to look more sinister, like gi's and cops wearing the hat pulled down to conceal their eyes in the shadow of the brim
-
ok since i am probly gonna start modding my mrce do all tk buckets have the raised brow? and how much did you raise it total in the center, 1/4"? personaly i like the brow on mine as is but guess i need to try to fit in somehow
-
mine is assembled and painted except for the clips and the ends are stuck screwed on tight even though I lubed em <_< oh well looks good
-
the whole problem is due to the fact that they used a real sub machine gun as a starter point and it was never intended(the real sterling gun) to be in a holster but carried from a sling, pistols can be right or left handed because the mag loads from the bottom, or like the mauser pistol that han solo carried which feeds ammo from the top off stripper clips because the mag is a permanant part of the gun
-
i am building this but how did you get the ends to thread together nicely i tried the pvc threaded ends and the abs threaded ends and none seem to want to thread in smooth and completly, tried lube and workin em back and forth, or do you not worry about the one end threading all the way on since the seam is covered by the control pannel?
-
I was able to find testors 1138 in the 1/4 oz, but found 1238 in the sparay can is this the same color?
-
cranky said:
Here´s mine:
I used kneepads that I cut pieces of and hotglued them to the interior. Works like a charm.
I used one set of fans I bought here on the forum (they are 80mm CPU-fans), I also installed two more fans (40mm) which I connected to a small switch then to a 9 volt battery (one battery for each fan). Fans are from a local computer store, and the switches are available in most stores selling electrical gadgets (Radioshack etc.)
what kind of knee pads did you use i like the look
-
Billhag said:
Tom
For the TD you can go for Humbrol No.5 Admiral Grey or Testors - 1138 Gray
Most seem to be going for the Testers now for their helmets as Humbrol appear to be making their
grey much lighter then it used to be
Here's a quick reference for the rest of the colours
I think the 'Testers' are as follows;
Ab Buttons
1772 Model Master - Blue Angel Blue FS15050
Ab Buttons, Frown & traps
1138 Testors - Gray
Black
Testor No.1747 = Humbrol No.21
Model Master - Gloss Black FS17038 1/2 Oz.
Blue
Testor No.1511 = Humbrol No.15
Testor No.2715 = Humbrol No.14
(Model Master French Blue)
I hope this helps mate
THANKS FOR THE INFO
-
ok i saw it here but cannot find it now, what is the grey color used for the thermal detonator? thanks
-
A good effort for something that is almost unworkable.I think most folk here would just use one of these on this Rubies kits.
your pic is not showing
-
I'll take a set if there are any left
wtb battle droid
in Off Topic
Posted
i apriciate the heads up but i believe i am looking for a company MLC in the phillipeans, think i found the guy has a tk # by the pic on the legion site it is definitly NOT the same guy