-
Posts
82 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Eagle
-
-
I'm working on a converting an old ATA kit to sandy for a friend. The forearms look a little off but they were approved at the time. Will these work for basic approval for a Sandy?
This is the front of forearms according to the markings, it looks off to me and I think I need to cut them or flip them to the back.
Thanks!
-
Just now, TheRascalKing said:
I use it and it works well. It's probably just soapy water, but who knows lol
I use a small screwdriver to pick the decal up so I don't touch the underside much, then float it into place, then rub out the liquid from the center out. Sucks those decals are so pricey, but they look good and there aren't any other options I'm aware of :/
The quality was excellent! I'm just horrible with painting and decal application lol!
- 1
-
Update: I totally botched some helmet decals. I rubbed the color off one side trap and the back traps are being a pain in the butt. Time to order a new set. Does anyone recommend the decal fluid on trooperbay?
-
On 3/19/2021 at 5:32 PM, TheRascalKing said:
Nice! I did the ANH to ESB conversion on my Anovos kit a while back - feel free to check out my thread if it helps! The look definitely grew on me as well and it really isn't that hard of a project once you already have the base suit... Best of luck, let us know if we can support!
https://www.whitearmor.net/forum/topic/49367-therascalkings-esb-anovos-tk-conversion-thread/I was actually studying your thread, it's very informative!
- 1
-
A new E11 ordered from Hellhounds props! Can't wait to see it!
- 3
-
I ordered the decals for my helmet today! I plan on ordering my E11 once I sell my current one.
-
I'm switching over to ESB because I like the look more and I have two other costumes that could use an ESB E11. It's going to be a slow process, because I'm also sizing down my kit as I lost weight. Can wait to document the process!
- 2
-
11 hours ago, justjoseph63 said:
If you can post up some photos of the areas where you need to alter it we may be able to help, especially if you used E-6000 for the joins. Trimming can be pretty straightforward... shimming is a whole different animal.
I actually haven't worn it in a few months, its back at home. Ill probably evaluate it in December. Is it possible to create new return edges?
-
Well I've encountered a good problem, I lost around 45 pounds these past few months, I'm still on the war path. But my TK no longer fits me, in a good way. I threw my armor up for sale, but im second guessing myself. It has a lot of value to me since it was my first build. So I want to see what yall think, sell and buy a new kit or trim and fix up? In order to get the armor to fit me correctly I had to get rid of almost all the return edge, which I quite like the look of. Thanks in advance!
-
2 minutes ago, TKSpartan said:
I was considering them, I actually I use their E11, I love it. But I'm staying away for the following reasons.
-I want a fun project to work on during these times
-price
-I cant get in contact with them, Iv'e messaged them twice in the last two months.
-Most importantly, I need something that can come apart for security and storage purposes. The barrel can be removed from the receiver. In a few months i'll be moving onto a college campus and carrying a rifle like prop, even in a case, could be risky. So I would like something that can fit into make crate.
Thanks for the suggestion!
- 1
-
Hi,
I'm looking for recommendations for a Dlt19. I don't want a 3D printed kit and preferably it can break down.
I found a vendor call Stardust Industries on FB that sells a kit, it looks nice. Anyone have any experience with them?
https://www.facebook.com/stardustindustries/?epa=SEARCH_BOX
Thanks!
-
UPDATE: After taking the TK out for it's first major walk around a neighborhood, its become clear that my TK still needs a lot of work in the leg department. I got REALLY bad bites on the back of my legs and right thigh, but not my left. I'm going to make mobility cuts and alter my legs a bit. I'll post updates when done.
- 2
-
15 hours ago, Sly11 said:
I will add, and also have this added to Joseph original post, but there will be a very special piece of merch available for when we hit the 1000. Something to celebrate this auspicious occasion. It is already in the design phase, and will honor the old and the new. It will be a one off run as we only get to celebrate this milestone once, and I know you wont want to miss out.
Can't Wait! Just him my EIB!
- 2
-
Thomas Hagin
61601
Centurion
Letter
Joseph
Thank you!
No problem!! http://www.whitearmor.net/eib/certificates/61601-centurion.png
- 1
-
Ill post some photos once I get my last items in the mail and edit my armor a bit!
- 1
-
UPDATE:
Sadly I never used this as I intended too. So I’ll make this post my closing chapter on my build and as something for me to look back on for future reference.
WHAT HAPPENED:
With all the free time on my hands due to the pandemic, nothing was stopping me from putting down the build. I finished relatively quickly. I did little parts in January and February. However, I would say 90% of this build took place during March and April. I didn't really stop to document it all. I would say the most documentation I have is in my EIB and Centurion threads.
------------
FOR NEWCOMERS AND FUTURE ME
Proper Protection!
I got some small cuts during this build and a really bad one. Make sure you are careful when handling sharp tools and use proper protection!
Cracks
Be ready for cracks. It's not a matter of if, its a matter of when. I got a few while building, two of which were my fault. It’s going to feel bad at first, but don't let a crack stop you from this project. Worst comes to worst you can always replace the part.
Snaps
Don't overset them. Also, I highly recommend the double snap method from @justjoseph63.
Price
Be prepared to drop quite a bit on a TK, it is an investment. Keep track of purchases.
Shoot for the Stars!
I went into this build with the goal of hitting Centurion. I built my armor with level 3 in mind so I wouldn't have to go back and make any major changes after basic approval.
Kit, not Commission!
Build your kit! It's cheaper and teaches you a lot. Of course, there is nothing wrong with commissions, but I would only recommend it if you’re tight on time, not money.
Heat Guns
It's true, all of it. Heat guns can really mess up armor, even AM which is VERY thick ABS. You can’t notice it in photos but the corner of my backplate is slightly warped due to being exposed to a heat gun for too long. Use caution when using a heat gun.
Ask for Help!
Don't be ashamed to ask for help! This isn't a simple task that you are expected to know going into it. Go to armor parties, make posts on the forums, ask squadmates!
SPECIAL THANKS
I want to thanks everyone that helped me through this journey. I made a few separate threads with armor questions and received many responses, they were all very helpful, so thank you!
@justjoseph63 and Sha Sha, thanks for your pointers and fixes you gave me throughout the EIB and Centurion process.
Finally, my good friend and now squad leader @Erice3339, Eric Elg. You were the one who pushed me to make my TK when I was on the fence about. You gave me really great advice! So thank you, I can't wait to get out of this quarantine and troop with you and Fireteam Alpha in my TK!
I think that wraps it up, I'll update this if anything else comes up ill update the post
Thomas Hagin
- 1
-
7 hours ago, justjoseph63 said:
Welcome back, Thomas, and thank you for your Centurion application!
CRL and Centurion Application Requirements:
All required submission photos are present, and GREAT job on your build Trooper
We are pleased to announce your armor displays all the necessary requirements as set out in the CRL. On behalf of the Sha Sha and myself, congratulations and welcome to the rank of Centurion!
Other-Armor Fit/Assembly:
First, I gotta' say BUCKETS OFF to you for the fantastic job you did on those fixes (especially those tube stripes)..... well done!
Just a few small strapping items for ya' though to make you look your best.
It looks as if your right forearm still wants to turn in for some reason, and I would think about changing the strapping to help prevent this. The "scoop" is designed to sit more toward the front to facilitate bending your arm without getting armor bite. In the second photo, yours is actually sitting in the rear. I see that you are using the 2" wide elastic (or nylon, I can't tell) for the bicep/forearm connection, but I would seriously consider changing the positioning. It will give you a much better look and definitely make it more comfortable to hold your E-11!
Reference images
There are still small gaps on your ab/kidney connections, but since the top halves look good we are going to suggest just tightening up your belt to even them out.
So there you have it, brother. Yet another Centurion level trooper added to make the Florida Garrison, the FISD, the Legion and the Empire proud!
Thanks Joseph! I did switch to the two inch elastic, ill fix it in a bit! Question, what is my centurion number?
-
1 hour ago, TKSpartan said:
Hi Thomas, you did an amazing work with your armor. glad to see your Centurion request.
Looking at your EIB submission, you may want to add a close photo of your forearms to see that your have removed the return edges as requested in EIB.
"And lastly, although you did a fantastic job removing them from the inner edges, the "no return edge" requirement includes the area inside the "hump" as well. 4 minutes with a Dremel and you will be good to go! "
Your Centurion Badge is just around the corner trooper !!!!
Fixed, photo in original post.
-
Thomas Hagin
TK-61601
Florida Garrison
Everglades Squad
Required
- Armor = Armor Master (AM)
- Helmet= Armor Master (AM)
- Blaster= Praetorian Blasters
Optional
- Boots = Imperial Boots
- Canvas belt = TKittell
- Hand Plates = Joesph
- Neck Seal = Darman
- Holster = Darman
Link to EIB approval:
Front
Back
Left
Right
Note: I tried very hard to close the gap. The best I could do was in the photos. I did fix the posterior plate from popping out.
Action
Belt
Note: The belt boxes are riveted in, I added an ABS square over it to prevent scratching.
AB Buttons
Wrist
Left
Right
Gloves
Shoulder Elastic
Strapping
Thigh Ammo Pack Rivets
Knee
Boots
Neck Seal
Cod and Posterior Plate Attachment
Blaster Right
Blaster Left
Blaster D Ring
Helmet Front
Helmet Left
Helmet Right
Back Helmet
Lens
Hovi Tips
Ear Screws
Thanks in advance for the comments! I hope everyone is safe during these times!
-
3 hours ago, Erice3339 said:
Congratulations, Thomas! Very proud of you and glad to see the hard work pay off. Way to represent Everglades Squad!
Thanks Eric! I cant wait to troop with fellow Fireteam Alpha troopers!
-
-
Thanks everyone! I'll make those modifications for Centurion! Luckily, I got lots of time on my hands!
- 1
-
On 3/14/2020 at 6:40 PM, ukswrath said:
Very nice work Thomas, good luck on your application
Thank you! I used your threads, they were very helpful!
- 1
-
@justjoseph63 The photos have been updated!
Hellhounds Props E-11 review/experience
in ANH BlasTech E11
Posted
I'm currently waiting on an e11 I ordered back in March. The guy seems nice and I know quiility isn't an issue. It's just communications. At this point I just hope he's ok.
I urge anyone that knows him or has his number to give him a call and just check in on him.