Fem Kat Rebel TK

Thank you

Started trimming the breast plate, ab plate and bottom half. i find the hips material much more easier than the abs, especially for sanding to a nice smooth rounded finish. Also I trimmed the back plates as well.

Thank you Eric

Well I hope my build helps you. I plan to do this to the best I can ☺

The joint would need sanding down as smooth as possible to get a nice smooth finish when filled on the outside. .it wouldn't be as noticeable from the inside. This is very much like a half tk half clone type of build.

Yes I will be sealing the armour from inside the casts of the cslves/shins. The outside will be fully enclosed on the inside will have an attached strip inside that will have velcro on sealing it to make a flush joint

After studying more HQ photos it appears that there isn't a grey wash on the armour it is in fact the shadowing from the environment. .so I will be keeping the armour white ☺

Sizing up the thighs and calves/shins. Both are seamless, I am looking at putting a strip of white plastic inside the side joins after trimming to size. The calf will require being able to open on the inside and a strip placed with Velcro attached so can be removed easily. I plan to fill the cracks with filler to make smooth joints. the thighs will probably need 1-2 inches off each side as quite large for my frame, and will need shortening around 1 - 1 1/2 inch to fit

yes absolutely! I think the younger generation of today's SW will associate more with these than the classic tk

Looking at the TK references ive noticed a grey wash over their armor. Im still thinking about doing this when the armor is complete. Would anyone have any opinions or suggestions on this ?

thank you...I'm going to do my best with this ☺

This is just an example of the armour put together. I shall be following the normal TK build process for this but will have to do seemless on the calves and shins. Theres a lot of trimming to do but will use my Shadow trooper as a template for sizing. This armour is thicker than the standard tk, made of resin with a satin finish.

Just awaiting drop boxes, lower front fore arms, thermal det and lid decals

Eyes and teeth dremelled out, and the underside all trimmed and smoothed out.

This is my armour

Yes I know of one other who I am working with on this. But I know I'm the only female and with the most upto date armour ☺

Here I will share with you all my complete WIP for my revel TK from the animated series Starwars Rebels. This is a photo of the armour and lid I have. I'm just waiting on the thermo, drop boxes, front forearms and helmet decals.