[E11 Blaster - Ebay Offer Help---Good for 501st and Centurion?]

I built his blaster and i agree it's a lot of sanding but the end product is awesome  I do have modeling experience from when i was a  kid but it's not that hard!  I can post pictures if need be, but the blaster with the electronics and sound can't be beat! I have even let little children hold it and it has held up to the test so far. I say GREAT product 

[Shin enclosures with rubber and magnets]

The slot (Sandwich) tab in slot idea is great but, what about having something like a tab click in place in the slot area? Then you can push the tab at the top and bottom of the shin to release. I don't know what to relate it to but i'm sure someone knows what i'm trying to explain  This is a great idea but the magnets could be a little difficult to maneuver inside a tight shin. Just an idea!!! 

[CptCasey's ANH Stunt Build Thread [MTK]]

Awesome   Looking great!  I also went with the double snap method, if one pops then the other will save the day. 

[Advice for adding kidney shims]

First of all, which armor brand is this?  Second if the vendor is respectable, he would send you another kidney plate if you e-mail them and send pictures!  That's the D option i would go with

[TK-11916 Requesting ANH Stunt Centurian Status (Anovos) [267]]

We all need to drop a few lbs.  My wife suited me up yesterday and said how can you breath in that!!  Can only make one snap on the sides   Armor still looks good even though!!

[CTID's RWA-ANH Stunt WIP...... 501st Here we go!]

Planning to downsize my amp case. Bought a Chinese amp with AM and FM radio plus mp3. It's a little to big so that's the first thing to get the ax!

 

Sent from my NXA8QC116 using Tapatalk

[CTID's RWA-ANH Stunt WIP...... 501st Here we go!]

Wow! What great ideas are brewing in my mind! Thanks for the inspiration!!!!

[Is this any good?]

Listen to the words of wisdom!!! For another $100.00 you can get the Anovos TK armor and be sure to get approved! JMHO!

[DarkPain's ANH Stunt Build -ANOVOS- First build]

Looks really good!! Nice stand also. May I ask where you got it from?<br><br><br>

Thanks,<br>

Eric

[Bought the armor. Now to wait.]

Thanks Andy!!!!

[Greetings from NC]

Eddie hello and welcome!  I'm just about to finish my Anovos stunt kit. A word of advice from a first time builder! Use the snapping system that many on this forum use and forget the Velcro system that comes with the kit! Trust me because i put the Velcro in and i'm now changing that system to snaps! Looks better (more film accurate) and will last much longer!  Also be careful not to get over enthusiastic about removing the protective film especially on the shins because they are hard to tell apart! But the biggest thing is to have fun building your armor!!!  

 

                                                                                  Take it easy,

                                                                                                       Eric 

[Bought the armor. Now to wait.]

Just to let you know that I ordered my armor from Anovos they said January and my armor came in about 3 weeks. I'm not trying to get your hopes up but that's the facts! Hope it comes early for you to!

[TK-19811 Requesting ANH Stunt EIB Status [SDS] [623]]

Excuse me, I'm kinda new at this but I'm not sure if this matters. How many stripes are supposed to be on the sides of the helmet? I've looked at a number of helmets and most have 15 stripes! Does this matter for EIB?

[TK10963 requesting ANH Hero Centurion status (Anovos) [Another one bites the dust] [Approved 2nd]]

Congratulations on the Build!

[Hello from a newbie]

Welcome Aboard Chris! There are some great people here waiting to give great advise if you need it!  Happy building

[DarkPain's ANH Stunt Build -ANOVOS- First build]

Just wanted to let you know your rear sight is on backwards. The jagged edge should point backwards.

[CTID's RWA-ANH Stunt WIP...... 501st Here we go!]

if you don't mind me asking, how did you get the modeling putty to stick to the bucket?  Let me guess, e-6000! 

[CTID's RWA-ANH Stunt WIP...... 501st Here we go!]

I think they look just fine  I like the way you did your lenses.  I'm thinking about doing mine the same way. For now I've got the lenses attached to the ear screws.   

[Painting armor to a showroom car like finish]

Nice can't wait to see it 

[Admiraldack's ANH Build]

Welcome to the journey!!!  After considering the type of Stormtrooper now comes the Armor Brand to choose from   This will be another hard choice so, do lots more research and pick one. There's many to choose from and depending on your body type ( Typical Stormtrooper Size) will also play into what brand of armor you choose!  After this is contemplated then the fun comes   I wish you all the best on your choices and build.  I'm presently building a ANH Stunt TK from Anovos.  This kit is nice and you can at least achieve EIB straight out of the box so i'm told and this will be my goal!  Again, as you probably already read (MEASURE TWICE CUT ONCE)   

 

                                                                                                                     SILVERDOLLAR22

[HyTechToyz voice changer with Aker amp. Will it work?]

Hey,

       Just wondering if the HyTechToyz voice changer will work with Aker amp. Is there a way to connect the two together?  If not what would be my best bet? I have the HyTechToyz voice changer but i need more volume.

[TK Boots on the Cheap]

Double WoW   That is a great alternative to the TK boot price point!! Thanks Michael!

[ANH Stunt build MTK]

Great job TK!!! I'm half way on my Anovos ANH stunt kit and waiting for boots money    Looks Great!

[Elwin's ANOVOS TK Build]

I'm doing my Anovos kit at the same time and agree with the score and snap method of trimming. 

[Return Edges]

Yes I agree!! Thanks Steve for the great information. Building my TK now and this will come in handy!!