-
Posts
692 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Stomper
-
-
Hey Tony,
Will the finely finished (no speaker) accept speakers later or is there something different in their construction that would prevent that?
If they are hollow and ready for later speakers then I'd also like to add a finely finished 2-tone to my order.
Thanks
You can add speakers later, but you will absolutely destroy the screens trying to get them out once they are set into place... LMK.
-
The list is updated, I don't have an ETA but I'm closer to getting production back up and running!
-
LOL... no worries, sorry for the earlier hassle, Luis!
-
Hi Stomper... glad to see you're back!
Could I order a set of unfinished ALL-White hovi's? i.e. the two tone before you paint them black? I have a TE HDPE that needs a white set for the "pre-painted" look. If this is possible, please let me know. Thanks.
Hey Chris, strangely it never really occurred to me to make the unassembled versions available in ALL WHITE, but no problemo... I have you on the list, thanks!
UPDATE: I have decided to make the unassembled versions available in either ALL BLACK... or ALL WHITE (upon request).
ONLY NINE MORE SPEAKER VERSIONS LEFT, TROOPS!! GET SOME!!
-
Hi Tony, sorry for the delay.
Yes, you assume right, non-speaker versions.
Thank you!
LOL... if anyone should be sorry for a delay it is ME!
I have you sorted, Damian.
-
This is a question that may sound indeed, silly. So these are speakers, what do you suggest I attach to these speakers as a reccomendation? Something like a Scott voice amp? A Wall-mart one? What do you use with your speakers?
Also the video link to the speaker demonstration didn't seem to work for me.
I got the link repaired, try it now! They are 8-ohm speakers and will work with any brand voice amp as far as I know, based on my testing. Other troopers use them with the Troopercom Interface (TCI for short), the TrikToys static-burst kit, Radio Shack amplifier (I use that to test them during production), and Hyperdyne systems. I use the TCI, Trik Toyz, and Radio Shack amps depending on what I'm doing.
Is there still room for a complete 2-tone set with speakers? if so please add meI do have room on the list, but did you originally say silver? I may be able to pull that off with some Alcad chrome and an airbrush that I have, but the custom work would increase the cost a bit. I'll add you to the speaker list for the two-tones unless I hear differently from you on a custom option.
thanks!
-
I already have you listed, Andy.
The list is currently updated, if anyone sees an error or needs to change/cancel their request(s) please LMK!!
-
Thanks for the welcome, guys!
I have the list updated... man did THAT get out of hand over the last couple of months!!
-
Hi Tony!
I'd like 2 sets of FINELY FINISHED Hovi's: 1 all black and 1 two-tone. Thanks!
I'll wait for your PM.
Damian,
I assume you wanted the non-speaker versions?
-
Hello
If they are still available I would like 2 of the finished two tone sets.
thanks
Hey Troy,
You didn't specify if you wanted them finished with or without the speakers... LMK ASAP and I'll get you added to the list!
-
No worries, Brother... glad you got yours done!
-
Yes, I have the two master patterns almost completed, just a bit more polishing up and I'll get the molds made!
-
Hey Troops,
I'm now back for a while... unbelievable, huh? I have to get all the lists updated, get my workshop re-organized (its a WASTED mess ATM) and make sure all my molds are still useable... then I'll start getting some stuff produced (for a change)!! If you get an email notice from this post/response and you need to cancel, please LMK ASAP... it's not a problem.
Again, sorry for the long delay Troops!!
-
Gracias mi Amigo!!
I'll get you listed and sorted out ASAP!
-
Hey Troops,
I'm now back for a while... unbelievable, huh? I have to get all the lists updated, get my workshop re-organized (its a WASTED mess ATM) and make sure all my molds are still useable... then I'll start getting some stuff produced (for a change)!! If you get an email notice from this post/response and you need to cancel, please LMK ASAP... it's not a problem.
Again, sorry for the long delay Troops!!
-
Hey Troops,
I'm now back for a while... unbelievable, huh? I have to get all the lists updated, get my workshop re-organized (its a WASTED mess ATM) and make sure all my molds are still useable... then I'll start getting some stuff produced (for a change)!! If you get an email notice from this post/response and you need to cancel, please LMK ASAP... it's not a problem.
Again, sorry for the long delay Troops!!
-
Yes I'm still alive... I'm so slammed with everything I have going on at the moment that its not a laughing matter. I'm hoping things will slow down in the next week or two... I'll get everything caught up soon.
This is exactly why I do not accept pre-payments...
-
Question:
Have you no feedback in you helmet?
Or are you use a larynx mic?
How far away is your mic from the speakers?
THX.
I don't get feedback unless I REALLY try to do it, and the microphone is mounted in my bucket just below the frown, placing it slightly below my lower lip and maybe within about 3" of the speakers.
-
Thanks, guys!
They're selling off nicely... only have the 400GB and the 80GB left!
FYI- nope.. no RAID array... just a bunch of MASS storage... I have 3 wireless networks (don't ask) and a hard-wire LAN in my house, I have HUNDREDS of DVD movies stored on a HUGE capacity server that streams whatever movie/program/music you want to whatever computer (or TV when I get that far) that I allow on my network around here...
-
Hey Troops,
I have been upgrading my computer rig and I now have 5 extra (freshly formatted and ready to install) Seagate Barracuda computer drives for sale... CHEAP!
Qty. 1) 80GB Seagate Barracuda 7200.7
Drive Summary
M/N- ST380011A
Capacity: 80GB
Spindle Speed: 7,200RPM
Interface Type: IDE / ATA (3.5")
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Average Seek Time (read/write ms): 8.5 / 9.5
Electrical Interface Speed: EIDE / Ultra ATA/100 - 100MBps
On-Board Cache: 2MB
$25.00 Includes PayPal fees & shipping anywhere in the lower USA
SOLD!!! Qty. 2) 200GB Seagate Barracuda 7200.7 SOLD!!!
Drive Summary
M/N- ST380011A
Capacity: 200GB
Spindle Speed: 7,200RPM
Interface Type: IDE / ATA (3.5")
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Average Seek Time: 8.5 ms
Electrical Interface Speed: EIDE / Ultra ATA/100 - 100MBps
On-Board Cache: 8MB
SOLD!!! $35.00(sold seperately) or $60.00 (for both) Includes PayPal fees & shipping anywhere in the lower USA SOLD!!!
Qty. 1) 400GB Seagate Barracuda 7200.9
Drive Summary
M/N- ST3400633A
Capacity: 400GB
Spindle Speed: 7,200RPM
Interface Type: IDE / ATA (3.5")
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Average Seek Time: 11 ms
Electrical Interface Speed: EIDE / Ultra ATA/100 - 100MBps
On-Board Cache: 16 MB
$50.00 Includes PayPal fees & shipping anywhere in the lower USA
SOLD!!! Qty. 1) 500GB Seagate Barracuda 7200.10 SOLD!!!
Drive Summary
M/N- ST3500630A
Capacity: 500GB
Spindle Speed: 7,200RPM
Interface Type: IDE / ATA (3.5")
Disk Size: 3.5"x1.0" (Low Profile Hard Drive)
Average Seek Time: 11 ms
Electrical Interface Speed: EIDE / Ultra ATA/100 - 100MBps
On-Board Cache: 16 MB
SOLD!!! $65.00 Includes PayPal fees & shipping anywhere in the lower USA SOLD!!!
-
they're 8-ohm speakers...
-
Hey Stomper,
In your first pic, are there speakers installed in the all-black ones?
And is the mesh also black?
The speakers are just so easy to see in the two-tone that I wondered if it was the color making the difference.
Yes, both versions have the same components in them. The speakers already come with a black "felt" material (that gets removed) over the metallic grill (that gets painted white) that you see in the two-tone versions. The all black version's speakers are virtually invisible behind the stainless steel screens.
Hope that helps!
-
Hi sir will the unassembled hovi kit have an option for me to color it with the 2-tone style? will the screen mesh be silver in color?
Oh and will these fit on an MRCE?
Thanks very much! very interested sir!
Sorry Luis, the Two-Tone versions are not available in an unassembled configuration... believe me when I say, I PROMISE the amount of time you will spend on them trying to paint them and have them look good is NOT worth the couple extra dollars to have them already done... and yes, the screens are stainless steel (silver in color)... LMK how you want to go and I'll get you on the list.
-
Heya Troops,
Sorry for being out of it for so long!! I have been working out of town for the last two weeks w/o steady internet access, and will be back at the end of this week... I have the vast majority of raw materials needed to get this run moving, so bear with me... I'll get the list updated, and start getting some of thses cranked out this weekend!!
Hey Rees,
Thanks for your observance!!
I do have a "hollow" version mold already set up that TE was ordering from for one of his prior projects, so yes I can most likely fix you up! Go ahead and PM me your wants, and I'll reply back as soon as I'm able!
non-Star Wars military helmet for sale
in For Sale - Archive
Posted
This sounds cool... I want to see (even though me and Paul were in the Infantry)!!
One thing though, please take note of rule #9 pertaining to the For Sale forum...
9) Sale items must be listed with an asking price. This does not exclude OBOs and price negations, but no open priced sales.