SirDenzington89 Posted February 4, 2010 Report Share Posted February 4, 2010 Hey guys, One things I am fuzzy about is the white strips you put on the armor on top of the joints. I was wondering which parts of the armor are supposed to have a strip on them I think ATA put the measurments on there but I am just not sure where they go haha. Thanks for any help Jonathan Quote Link to comment Share on other sites More sharing options...
pandatrooper[TK] Posted February 4, 2010 Report Share Posted February 4, 2010 Do you mean A New hope style cover strips? The go on the front and back of the biceps, forearms, thighs and shins. Arms are usually 15mm wide, legs are 20mm. Quote Link to comment Share on other sites More sharing options...
SirDenzington89 Posted February 4, 2010 Author Report Share Posted February 4, 2010 yes the ANH ones. Thanks Pandatrooper! Quote Link to comment Share on other sites More sharing options...
pandatrooper[TK] Posted February 4, 2010 Report Share Posted February 4, 2010 No problem. Size / width of those strips may vary depending on your build / body type, but those sizes are the most common. Leg strips are also sometimes 25mm. Really, you just cut them to suit your needs. Quote Link to comment Share on other sites More sharing options...
SirDenzington89 Posted February 4, 2010 Author Report Share Posted February 4, 2010 Thanks. I got the right biceps, shoulder bell, forearm and handplate done. Now I know how the strip is supposed to go on there so I take some pics now. Thanks for the help Quote Link to comment Share on other sites More sharing options...
SirDenzington89 Posted February 7, 2010 Author Report Share Posted February 7, 2010 Thanks stukatrooper! Thats an awesome picture to use as a reference Quote Link to comment Share on other sites More sharing options...
AlaskanSalmonTrooper[501st] Posted February 9, 2010 Report Share Posted February 9, 2010 Thanks stukatrooper! Thats an awesome picture to use as a reference yes, agreed...I used 15m for the arms and 20mm for the legs. I measured twice and glued one time. Quote Link to comment Share on other sites More sharing options...
Darth-Felth Posted February 10, 2010 Report Share Posted February 10, 2010 I have a large piece of HIPS... how do I go about cutting it and making it look like the strips above? ie how do I get the strips clean and straight? And is there any curvature to any of the pieces? Quote Link to comment Share on other sites More sharing options...
SirDenzington89 Posted February 10, 2010 Author Report Share Posted February 10, 2010 I measure and mark with a pencil and take my time and go slowly when Im cutting Quote Link to comment Share on other sites More sharing options...
pandatrooper[TK] Posted February 10, 2010 Report Share Posted February 10, 2010 Take a long metal ruler / straight edge, and use a sharp X acto knife / blade. Be careful of your fingers, the blade is sharp. Score the plastic using the metal ruler as a guide, but only do a LIGHT pass with the blade. Do a second score, a little more pressure than last time, then one more pass. Now bend the plastic with your hands and "snap" the plastic along the seam - presto - instant straight edge. measure 20mm or whatever width you need on both ends, and place the ruler on these new marks. Repeat the scoring described above, and snap again. Now you have a cover strip! Quote Link to comment Share on other sites More sharing options...
Darth-Felth Posted February 12, 2010 Report Share Posted February 12, 2010 Is 20 and 15 what was most used in the movie or what is most used by the 501st? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.