Need Feedback

[Darth Fader 92]

Hey guys its been a while since ive posted or updated, been on a hiatus due to some things, but managed to finish my armor somewhat, still got do some adjustments. But would like your expert advise as to what i can do to make these adjustments.

 

<a href="http://s1288.photobucket.com/user/cdiaz1992/media/30F9AF1E-7B9C-4DE4-B607-F55102CABBF7_zpsc2pdsezc.jpg.html" target="_blank"><img src="http://i1288.photobucket.com/albums/b495/cdiaz1992/30F9AF1E-7B9C-4DE4-B607-F55102CABBF7_zpsc2pdsezc.jpg" border="0" alt=" photo 30F9AF1E-7B9C-4DE4-B607-F55102CABBF7_zpsc2pdsezc.jpg"/></a>

 

 

Sent from my iPhone using Tapatalk

[Darth Fader 92]

 

 

Sent from my iPhone using Tapatalk

[Darth Fader 92]

Dont mind the shoes just got my boots, and question have any of you been able to successfully glue rubber hand guards to gloves?

 

 

Sent from my iPhone using Tapatalk

[Ryth_[501st]]

1. Shorten the shoulder straps that goes to the bridge, so you'll get it closer, much closer.

2. The strap (if you have it) from forearm to bicep should be closer. The allignment is good!

3. Tighten the two straps that goes from ab to chestpiece, that might help close that gap you've got going on.

3.2 You could also try put ab further up, followed by the thighs - that would help close that gap and

keep the thigh from touching the kneeplate.

4. Belt is unnaligned. Middle button cover should be right under the button panel.

Also it's supposed to be further up, touching the button panel.

 

 

That should do a lot!

[wingnut65[Staff]]

Shoulder bells are too far back.  Move the snap plate to the back side of the bell and it will force it to sit more to the front