ABS scratch remover

[theholyfilament]

Any suggestions for a good ABS scratch remover? While completing my build, I sanded the seams for some of the ABS before gluing. There are a few parts where I scuffed a bit too far and it shows. Thanks.

[Flash1336]

email sent.....

[pandatrooper[TK]]

Sand with wet sand 600, 800, 1000, then polish it with Novus or cut polish. I have repaired ABS from serious cuts or damage or Dremeled returns and you can't tell it was ever even damaged after polishing.

[theholyfilament]

Thanks, fellas.