Mason.c

Internal cover strips on the first half of the thighs, as well as externals on the forearms and shins. Sent from my SM-A520F using Tapatalk

The lid in its current state, dad decided to go mental with the interior, including keeping up the cooling systems. Sent from my SM-A520F using Tapatalk

First layer of painting done on the ears, traps, teeth, and ab button detail. Sent from my SM-A520F using Tapatalk

Working on the ears, found the best way to do this after rough trimming was to use a spray can. Still needs some fine sanding but wanted to get the lid together to see how it's coming along. Eyes cut out, sanded down, but need a little more fine tuning, teeth cut out, brow marked up for a little trim, and the black outline is done on the tears and traps. Dismantled the lid, masked and marked off areas to paint. Sent from my SM-A520F using Tapatalk

Internals fitted to the shins, with the cover strips left to cure to one side before puttting both shin pieces together. Sent from my SM-A520F using Tapatalk

TD assembled with black screws, likely going to touch them up with a bit more paint when I remove the protective film. Sent from my SM-A520F using Tapatalk

TD assembled, will tighten up once the e6000 has cured. Sent from my SM-A520F using Tapatalk

Up next was the measuring up and trimming of the drop boxes and TD end caps and plate. Sent from my SM-A520F using Tapatalk

Next up was the task of cutting out the 15mm, 20mm and 25mm internal and external cover strips (internals are obviously slightly narrower than the externals in order to fit). Sent from my SM-A520F using Tapatalk

First off was rough trimming. After rough trimming was done, it was time to get in the garden for some fine trimming and sanding. Further sanded, if required, will be done during the fitting process. Sent from my SM-A520F using Tapatalk

Hi Everyone! Here's my new TK build. I picked up my RWA kit at NSC from Ross, it's an 18th birthday present from my parents which I've got early so I can try and get it submitted for clearance around my 18th (in November). Here's what I've got to work with, plenty of untrimmed plastic