FISD E-11 Reference Team
-
Posts
53 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by FISD E-11 Reference Team
-
-
Table Of Contents:
(Just click a line to jump straight to that chapter)
#17 - Inner Bolt With Clearing Strip, Plunger, Extractor And Serial Number
#18 - Charging Handle And Rear End Of Inner Bolt
#21 - End Cap With Lock And Ring
-
6
-
-
A long time ago in a galaxy far, far away ...
... a small group of dedicated Star Wars fans and FISD members felt the time had finally come to create a one stop E-11 Blaster Build Reference.
Working together from across the globe, the team collaborated online and worked hard to establish this collection of outstanding modifications to assist future E-11 builders. Designed for the popular and commonly used resin build kits, it includes modifications for the ANH version of the BlasTech E-11, however many of the modifications are usable in building both the ESB and ROTJ variants.
All the content below will help you in selecting modifications for use in your own build, depending on your kit, skill level and personal preferences. Be aware to not use this document as a build guide! You always have to be sure about your next step. And we recommend to read the complete sub-section of a part before starting your work. To provide an overview, labelled blueprints are included, followed by an interactive table of contents to bring you straight to the relevant modification. Additional blueprints with even more detail are included in a separate chapter at the end. These really help to understand how a real Sterling works.
Many thanks to the following FISD members for their work in compiling this reference:
Bulldog44 (Brian)
Dark CMF (Tim)
Sith Lord (Ian)
T-Jay (Tino)
Usaeatt2 (Aaron)
Full content as downloadable PDF document in DIN-A4 size
Full content as downloadable PDF document in US letter size
Sterling parts in downloadable PDF document Photo Compendium
The PDFs are direct copies of this thread content, with only minimum changes to optimize some page breaks here and there.
If you find any other substantive differences, please send a PM.
Think before printing - please consider your responsibility to the environment before printing a PDF. Thank you.
-
14
-
FISD E-11 BLASTER REFERENCE
in ANH BlasTech E11
Posted · Edited by gmrhodes13
photo updated
#01 - Getting Started
After receiving your kit, conduct an inventory of all pieces and make sure everything is complete. Wash the resin parts with soap and water (like cleaning the dishes). This is recommended because the new parts will likely be covered with some fine resin dust and will still have release agent on the surface. Release agent is a chemical used to assist in removing the parts from the molds after casting. You want to remove all of the resin dust and release agent because they can cause problems with glue and paint. Washing all parts with soap and warm water will prepare the surface for your work.