-
Posts
53 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by SpikedGoat
-
-
Good Luck! Have Fun!
-
-
Thank you everybody for your help. I have finished and I have just gotten the approval! Thank you all again!
-
-
Thank you, I will take a look at lowering the wings on it. Its pretty tight already, moving it lower wont move it back any. I have pretty thick thighs.
-
I fixed the split rivets. 10mm from the split. Spaced evenly along the side.
Cap Rivets on the Battery back. How did these turn out?
-
How did the belt turn out?
-
right at 10MM . Thank you for the help.
-
Before I make the same mistake twice...
How do these holes look?
I still have alot more painting/sanding/filler work left.
-
Thank you,
I know what I am doing tonight.
-
Is that a deal breaker for Centurian? Should I move it? If I move it I have to move the middle one too to get the spacing right.
This is what i would need to do to fix it?
-
Split rivets attached. (Sorry for the distored Picture) Do these look ok?
-
Very Nice! Good luck.
-
Me too. SpikedGoat.
-
Starting on the strapping.
-
What are the male snaps that I use for the butt plate and the right of the Ab plate? Are these the line 24 snaps? The pictures I have seen are different then what I have.
-
Thank you, I trimmed the belt and it looks great now.
-
So Im looking at this guide and before I cut and drill holes I wanted to make sure I have it right. (I have not measured anything this is just eyeballing)
I want to make sure the Dropbox's line up with the end of the belt? Or are the rivet covers aligned with the center of the drop boxes?
- The drop boxes dangle from the sides of the front plastic belt (ammo belt) via white straps and are aligned under the plastic tabs of the ammo belt.
- Drop boxes are vertically aligned with the end of the ammo belt with minimal gap between belt and box.
I think I need to shorten the belt.
-
It is been awhile since I have had free time to work on it. Here are some of my updates / Questions.
Completed TD:
Added Supports:
Questions
How do I cut this? Do I make it just flat around the raised part?
Same with this one? How does my trim line look? How high does this stick out?
This is a rough mock up of the belt. How do the 45deg cut lines look? Do the covers here need to be flush on the belt or have a little return edge to raise them up a little? Do the covers need to be spaced from the edge of the belt?
Thanks again for all the help.
-
Welcome!
-
Drop boxes:
Dry fit
Back:
Front:
Battery Pack:
I am not sure how to mount this. I now there is a rivet, but I don't know which one? I have not bought a river gun yet I do have a few brass snap rivets. Any help would be great.
How does the the placement look? -
Ear Update:
I dropped one of the ears a little it is a much better fit.
Sniper plate:
Its glued, hope I didnt screw up....
-
Thank you, I will drop those lower tonight. After you suggested it I think that will help alot.
-
Helmet Status: I don't think ill ever be happy with the ears so I'm stopping for now before I screw it up. It doesn't look too bad.
TK Armour Transport (pimped out carrying case and storage)
in Boots, Soft Parts, and other Accessories
Posted
Very nice.