AZ_ST Posted January 28, 2016 Report Share Posted January 28, 2016 I'm building a DoopyDoo E11 and have pinned and glued a few parts with E6000. I realized it would be easier to paint if some of the parts I have already glued were separated. What is the best way to separate the resin parts and remove the old glue? Quote Link to comment Share on other sites More sharing options...
Dark PWF[Staff] Posted January 28, 2016 Report Share Posted January 28, 2016 Typically (with armor at least) if you put it in the freezer overnight, you can pry the parts apart fairly easily. I'd be very cautious in doing so with the resin, however, as it is more brittle than the ABS. I would also recommend using an epoxy for the resin assembly on the DoopyDoo kit, as opposed to E6000. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.