[TheSwede`s FOTK build [KB]]

Awesome bud

Sent from my SM-G950F using Tapatalk

[TheSwede`s FOTK build [KB]]

Sweet, whos armour have you gone for?

Sent from my SM-G950F using Tapatalk

[ShadyP's FOTK built thread (Backstage Props - preorder FOTK)]

I've sent it via tapatalk.

Sent from my SM-G950F using Tapatalk

[ShadyP's FOTK built thread (Backstage Props - preorder FOTK)]

Do you want me to pm you with what they sent me?

Sent from my SM-G950F using Tapatalk

[ShadyP's FOTK built thread (Backstage Props - preorder FOTK)]

Yeah i read that this morning. Did BSB get back to you via message? They replied to me. My mates looking at going down the Diversity props route. They are doing fibreglass and abs.

Sent from my SM-G950F using Tapatalk

[ShadyP's FOTK built thread (Backstage Props - preorder FOTK)]

Seeing the test pulls in petg has me pretty amped to get this kit finally however the prototype from Backstage Props posted over the weekend has me second guessing again.  If they've really locked down a 1 piece yoke (more or less) and a 1 piece TD I might have to buy a second kit much sooner than I intended to.  

Have they given a price yet?

Sent from my SM-G950F using Tapatalk

[Heartstopper FOTK Build (MIMIC Armor)]

First half of mimic armor came in today

Sent from my SM-G950U using Tapatalk

Nice that bud

Sent from my SM-G950F using Tapatalk

[48" FOTK kid's armour with blaster conversion]

That link doesnt work for me
 

Have you got tapatalk? It works for me.

Sent from my SM-G950F using Tapatalk

[48" FOTK kid's armour with blaster conversion]

I have been, it’s just it either gets melts and roughy or fluffy and rough depending on dremel speed




The supports are gone but I’m worried it’ll catch in the undersuit


Sent from my iPhone using Tapatalk

Get a Stanley knife blade and scrape it off. I smoothed it of by hand with sandpaper aswell.

Sent from my SM-G950F using Tapatalk

[48" FOTK kid's armour with blaster conversion]

Get some of these https://www.toolstation.com/shop/p15110?r=googleshopping&rr=marin&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&mkwid=szx6rPWmk_dm&pcrid=142481253537&pkw=&pmt=&product=15110&gclid=Cj0KCQiAieTUBRCaARIsAHeLDCSznPtD6WScs39KHzDXZkFsAJSgU-1pBr1anAhkD9LLV5_Xg8B7FRIaAuVzEALw_wcB

Sent from my SM-G950F using Tapatalk

[48" FOTK kid's armour with blaster conversion]

 
Thanks I've been searching and got 4-5 threads of others that have done the same to use as a guide. I was thinking of the same paint too.

Ford Frozen White

Sent from my SM-G950F using Tapatalk

[48" FOTK kid's armour with blaster conversion]

On 3/2/2018 at 10:16 PM, Varkanoid said:

Ah right will try that thanks. I bought a motorcycle black visor insert for the eyes and in the garage I had a couple of sun screens for the kids I dont use anymore and if I overlap the mesh it looks perfect for the mouth. My new multi-tool came today so I`m nearly ready I think I just need a sheet of white plastic to use to stick the two parts together. Also going to paint the lot when its done as its not glossy enough. Not looking forward to doing the Rubies helmet I think its going to be a PITA to stick the two halves together.
 
 

I'm near Warrington. I posted something a couple of years back on my build. If you need any advice pm me. I had mine primed and finished with car paint.

Sent from my SM-G950F using Tapatalk
 

[48" FOTK kid's armour with blaster conversion]

Very intersting and has prompted me to make one for my son as we are going to a Comicon in Blackpool in May 2018 (UK). Just a couple of questions if you still remember this thread.
1. What glue(s) did you use ?
2. The Helmet I have got the same one and wondered what you used for the eye pieces and also the mouth mesh piece as it currently has 3 holes in. I`m just wondered whether to cut it out and replace it altogether.

I used E6000 glue. Limo tint for the eyes and mesh from Halfords for the mouth.
Where abouts are you based?

Sent from my SM-G950F using Tapatalk

[[SOLD] FS: FOTK ANOVOS HELMET]

Dollars, euros, pounds?

Sent from my SM-G950F using Tapatalk

[Heartstopper FOTK Build (MIMIC Armor)]

http://www.therpf.com/showthread.php?t=273868

Sent from my E6653 using Tapatalk

[ShadyP's FOTK built thread (Backstage Props - preorder FOTK)]

I'm a size UK 8 and they are more like a UK 10

Sent from my E6653 using Tapatalk

[ShadyP's FOTK built thread (Backstage Props - preorder FOTK)]

These FOTK boots are much more comfortable than my TKBoots. I’m not sure if it’s just a sizing issue or the overall shape but I could live in these. After a couple hours in my OT TK, my feet are killing me.


Sent from my iPhone using Tapatalk

How are your boots for size? I've just received my and they are massive.

Sent from my E6653 using Tapatalk

[Heartstopper FOTK Build (MIMIC Armor)]

Which type of geeky pinks gaskets did you get?

Sent from my E6653 using Tapatalk

[ANOVOS TFA Kit - thoughts?]

Log into you account on the Anovos site. View orders, request to cancel or contact technical support.

Cheers. I was having difficulties with the Anovos website. I found it when I eventually got on.

 

Sent from my E6653 using Tapatalk

[ANOVOS TFA Kit - thoughts?]

So how would I cancel my order? That is the question!

 

Sent from my E6653 using Tapatalk

[First Order Stormtrooper - Scratch built]

Really nice that bud.

 

Sent from my E6653 using Tapatalk

[ANOVOS TFA Kit - thoughts?]

Cheers, I'll probably be retired by the time anovos deliver.

 

Sent from my E6653 using Tapatalk

[ANOVOS TFA Kit - thoughts?]

BTW Max ... you're in Europe, right? Check out the new kit from Mimic out of the UK. Looks pretty awesome. You might want to cancel and jump ship!

 

 

 

Sent from my iPhone using Tapatalk Pro

Have you got a link to mimics armour?

 

Sent from my E6653 using Tapatalk

[Another 48" TFA Stormtrooper]

Yeah he does. A death trooper would be cool

 

Sent from my E6653 using Tapatalk

[BIG HELLO FROM MANCHESTER UK]

Lol

 

Sent from my E6653 using Tapatalk