CallMeMrTibbles[501st] Posted February 24, 2022 Report Share Posted February 24, 2022 Could you guys please take a look at these pics to make sure you're happy with the painting all the way up to level 3. I know it needs weathering, but I can do that over the clear coat. The abs is not as shiny (RWA had supply issues) so I'm going to spray with clear semi-gloss, but once done these details will be sealed. Thanks,Rich Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 25, 2022 Report Share Posted February 25, 2022 EXCELLENT work on that paint job, brother! Looking forward to having another HWT in the ranks, but If I could make a couple of suggestions they would be: 1. As per the CRL, ideally the slant on the front of the tube stripes should face forward and they should be about a "pencil width" from the cheek as well as of a similar shape/size. 2. Can you post up side views of the ear position(s)? In a perfect world the screw heads should line up with the rear angle of the trap. Quote Link to comment Share on other sites More sharing options...
CallMeMrTibbles[501st] Posted February 25, 2022 Author Report Share Posted February 25, 2022 Thanks Joseph I knee I was going to mess up those tube stripes! Easy enough to strip and redo. I'll check the screw alignment with the traps when I get home. Hopefully enough wiggle room if I loosen the screws to get them lined up. 1 Quote Link to comment Share on other sites More sharing options...
CallMeMrTibbles[501st] Posted April 9, 2022 Author Report Share Posted April 9, 2022 Hi again all,Been a while since I've been able to work on this.I've redone the blue tube stripes, given it a clear coat of semi gloss lacquer to try and make it closer to my armour, and given it a light-ish dusting of charcoal powder.All feedback gratefully received 1 Quote Link to comment Share on other sites More sharing options...
Goggytalks[TK] Posted April 9, 2022 Report Share Posted April 9, 2022 Looking great Richard. I’m not too familiar with the HWT character but an image I saw of one somewhere looked quite weathered. Not as much as a sandy but still quite profound enough to see at a fair distance. I would add some more weathering on the helmet as I can hardly see it in the photo. How are you enjoying the build?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
CallMeMrTibbles[501st] Posted April 9, 2022 Author Report Share Posted April 9, 2022 It actually looks a bit more weathered in the flesh than in the pics, but also while I've seen both extremes I didn't want to go 'too' far. (Would prefer it on the heavier side though ) Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted April 9, 2022 Report Share Posted April 9, 2022 I found with taking some photos that I had to go a little darker in some areas as you just couldn't see some of the weathering, with using charcoal, dust or waterproof paint you can always adjust or correct anything without too much trouble. 1 Quote Link to comment Share on other sites More sharing options...
CallMeMrTibbles[501st] Posted April 9, 2022 Author Report Share Posted April 9, 2022 Thanks Glen,I was studying yours closely before weathering mine. Will have another crack this weekend and darker it up some more 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.