Jump to content

Weipertr requesting pre approval review(RS)


Weipertr

Recommended Posts

Looking ok for basic, you cold move your arms upwards a little, forearms are touching your handplates, also even the gaps at the elbows on both sides.

 

For higher levels you could reduce the gap between shoulders and shoulder straps.

 

Good luck with approval

 

Link to comment
Share on other sites

54 minutes ago, Weipertr said:

Tried to upload more pictures but its not letting me.

Forum only allows a certain amount of images, most of us use a free online image host IMGUR,  upload your photos then copy the links into your post, here is a how too

 

  • Like 1
Link to comment
Share on other sites

So I stick with my original assessment, should be ok for basic approval, arm and shoulder adjustments would be good as previously mentioned

20211024_150258.jpg

 

To be knit picky for higher levels

The corners of the plastic belt should meet the width of the belt. Also make sure the drop boxes align with the end of the plastic belt, not the cut corners 

  • The corners of the plastic ammo belt shall be trimmed at a 45 degree angle that that meets the outer edge of the cloth belt.

 

Butt plate is being pushed back a little, tighter strapping or perhaps some V tabs may help

e4Qi0zC.jpg

 

Brow trim is twisted on the back. Decals don't fill all the top traps but they are decals, may be mentioned for higher levels

96kM8cm.jpg

 

Brow trim down on one side, even out

4u8F0np.jpg

 

Fabric belt looks a little loose or high on your side left side, may not be secured correctly. Sides of kidney plate are sticking out over the ab, adding some pieces of plastic behind can help hold them inwards

Q0WJ98g.jpg

 

On sides your kidney and ab plates not matching at the top. Also belt loops a little wide at top so they hang on an angle

xGTRBLW.jpg

 

Backplate looks to be being pushed outwards at the top, maybe tighter strapping to help bring it in and up a touch

4OXgDrE.jpg

 

You could also add some ABS paste between the gaps on the lower ridges of your thighs. Also TD is not quite central or it could be as you are on an angle to camera

20211024_150237 (2).jpg

gallery_12157_15_2547.jpggallery_12157_15_1150.jpg

 

 

These are all just suggestions for higher level clearance so don't panic just yet ;) 

 

Good luck with approval

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...