Jump to content

LTM's Imperial Surplus FOTK TLJ


LTM

Recommended Posts

This is going to be a slow build, so strap in and hang on.

 

First is the BBB day (minus the BBB). its a lot of parts

PlDMZVI.jpg

 

Planning on L3, so rubber gaskets are in hand

Y0PbjmH.jpg

 

Lots of sourced bits/bobs, this one is for the back of the armor (goes underneath the thermal det),

VPgBzoN.jpg

 

Edited by LTM
title change
  • Like 2
Link to comment
Share on other sites

3 hours ago, TKSpartan said:

great !! looking forward for your advances , good luck !:jc_doublethumbup:

 

Btw, What's  your armor make?

Walt's Trooper Factory (WTF)

  • Like 1
Link to comment
Share on other sites

I think you are the first WTF FOTK build so it will definitely be interesting to see how everything goes together ;) 

 

  • Like 2
Link to comment
Share on other sites

You finally got it Lou!!! I'm pretty darn excited about this as it is indeed our first WTF FO TK build.

I spoke with Walt about this kit and several of the aspects he has included, including the interesting  multi piece shoulder back and front under section of the chest plate, and the 3 piece chest plate.

May I ask that you post up a good image of the resin parts he also includes as this will be excellent for all our members to see what comes with the kit.

I'll probably be talking with you again soon about some of the other pieces :)

Good luck with this build sir, I look very much forward to seeing your progress.

  • Like 1
Link to comment
Share on other sites

7 hours ago, funkster said:

I’d be interested in how you get on with the lid if you’re building it

Mine’s been “tricky” to get to fit together

Did you get any helmet clips?

No resin pieces yet or stickers for the build.

Link to comment
Share on other sites

Just received my heavy vest, this well made and Carlos is a great guy throughout the purchase process.

Xolo props on facebook

4m26zDg.jpg

 

  • Like 1
Link to comment
Share on other sites

32 minutes ago, funkster said:


“Glad” it’s not just me then

Little irritating as I’m full steam on my build at the minute

Posting the build on here?

Link to comment
Share on other sites

  • 2 weeks later...

Working on the TD, going to make it so that the cylinder can slide out

 

Back plate has a curve, in this pick it is upside down (curve is at top)

sdu5pAe.jpg

 

Hard to find the cut lines, and of course I missed it... Going to paint the armor so looks like it is putty time.

tvHXQlZ.jpg

 

Dammit

tGKLwGU.jpg

 

With the back plate. While I can have a seam, this is too large so I will make it seamless.

CEkyACh.jpg

 

Look at that curve, anyone know why it changed from flat?

uI907ht.jpg

 

Since I had fixes, decided to switch to making it functional and more accurate. So pull everything apart

BCFGJPD.jpg

 

Found a poly tube at mcmaster carr, so need to remove the indents and graft the body onto the tube.

I2jtux8.jpg

 

Some cutting and sanding later. Still need to cut out the tube and glue the body, then fill and work on the actual TD canister.

68ZXzQv.jpg

 

 

Edited by LTM
  • Like 2
Link to comment
Share on other sites

With the TD

If you wanted to reduce the gap and but still have it separate you can do what I did for my ab boxes.

Put some mold release / wax on the back plate.
Get some body filler / bondo / p38 on the TD
Push it in in place so the filler squishes out abs fills the gap
Wait for it to go off
Pull of the TD as the wax should have stopped the filler attaching
Sand and tidy up the TD

Boo.

  • Like 1
Link to comment
Share on other sites

Sanded both the backplate and TD back to fit a little better. I can live with this gap if it is not too large (I have not seen the gap in TLJ)

cpUQa4i.jpg

 

Attached the TD to the backplate with screws and nylon nuts. Added a few magnets to the middle of the TD and secured with epoxy putty and fiberglass cloth (so hopefully the magnets don't come loose).

wbFodpf.jpg

 

  • Like 1
Link to comment
Share on other sites

TLJ and TROS do inf fact have a gap between the housing and back plate. The endcap is a full tube which goes into the housing and the top slot and back panel are cut out showing the tube insided.

 

A coupe of references

43842853_tdloose.png.bcc3c2fb23e6ecaf76c23f4c0334babe.png 

 

13695589_td1.png.36c36c4cd20137228676c9eebd1463ac.png 

 

1461870781_td2.png.0d2293eb3dce275a75b8c4734f2ab3e9.png

  • Like 1
Link to comment
Share on other sites

Work continues on the TD. Filler and first round of sanding

px2TVrZ.jpg

 

Created the tube, just need to cap the ends

F0j4Wpn.jpg

 

Biceps are in three pieces

XUuUMFA.jpg

 

Has some adjustment with the overlap (can make functional if preferred.

JExPESH.jpg

 

Taped together

gmNrMwu.jpg

 

Forearm is in 5 pieces

s9jSyKW.jpg

 

  • Like 2
Link to comment
Share on other sites

Nice work on the TD details.

 

For insides you will find they overlapped (also had a slight curve), many glue in position but they can be left loose as was seen on screen

 

bicep.png.69ed4069116c309146f647910c06a5b4.png  thigh.png.5b179b10427c3f90659656293679eef4.png   thigh2.jpg.303391d29bb90858e8ec3fa439b557c2.jpg

 

Link to comment
Share on other sites

Rough trimming on the body.

isPgkZ0.jpg

rtWlOWT.jpg

p1DhdFn.jpg

KGWK9kc.jpg

 

This is not going to fit as-is, could not get it closed around my mid section. Not sure if you add shims to the side after the box or if you split in the back.  Looking at other threads I don't see anyone needing to shim? Can someone compare their kit to the measurements I posted in the pictures above, any help appreciated. Just concerned if I modify now that I could be throwing off the back and chest plate.

Link to comment
Share on other sites

50 minutes ago, LTM said:

Rough trimming on the body.

isPgkZ0.jpg

rtWlOWT.jpg

p1DhdFn.jpg

KGWK9kc.jpg

 

This is not going to fit as-is, could not get it closed around my mid section. Not sure if you add shims to the side after the box or if you split in the back.  Looking at other threads I don't see anyone needing to shim? Can someone compare their kit to the measurements I posted in the pictures above, any help appreciated. Just concerned if I modify now that I could be throwing off the back and chest plate.

 

Normally split in the back as the TD plate covers the back so you could add some more there 

Lots of different ways to hold it together, some in this gallery section

You can't go past @ukswrath's build, start of the torso area here 

 

Strapping here

 

Link to comment
Share on other sites

Working on the torso, cut the kidney in the middle and gained a few inches. Still need to get a few more, thinking of adding 2 inches on each side after the last body box. Not sure on how this will affect the chest and back, will try to mock this up and use a lot of tape.

 

You can see the zipper I will add and the TD plate. Currently the plate barely covers the gap (could always add more plastic in this area.

D2qjIw7.jpg

 

fcS4UbM.jpg

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...