Jump to content

Sgt Carida's HSP R1 TK Build


Recommended Posts

HSP asked if I'd be up to the challenge of building one of their R1 TK kits and making a tutorial here and I said sure will!  So I got the big brown box last week and here is what it looked like:

ee912601-a9d8-44b9-bf5a-b51cd6ad0288_zps

There were 2 missing parts and one extra part sent.  I sent a message to HSP and the parts are in the mail.  No big deal since I didn't start till today.  

  • Like 1
Link to comment
Share on other sites

I've built a lot of sets of armor in my 13 year 501st career.  The last set being a HSP Mudtrooper.  I've built 3 sets of TK armor as well....First Order, ESB TK, and Stormtrooper Commander.  I've built a lot of clones as well as building a shoretrooper, death trooper, and Tank Commander from R1.  

 

I started with the helmet tonight.  Here is what it looked like out of the box:

IMG_1301_zps6yzak1tr.jpg

IMG_1303_zpslbllnhjp.jpg

IMG_1304_zpsdw3j9t0w.jpg

IMG_1306_zpsuqzfepgo.jpg

I also laid out the abs parts and the resin parts together:

IMG_1299_zpsbuxavn7v.jpgIMG_1300_zpsf1a9fth6.jpg

The helmet I got is resin.  Pull is ok.  I don't see anything odd about it and clean up has been pretty easy so far.  I let the helmet sit in the sun for about 30 minutes so the resin warmed up and was easier to sand.  I got the major seam line mostly off with a hand held sander and sanding sponge.  Pretty easy.  There is going to be some difficult sanding in places but I'll get that later.  I wanted to get the eyes, frown and head opening cut out tonight.  Eyes went pretty easy.  Head opening I didn't do it all because some areas are thicker and I was trying to maximize my time on the eyes and frown.  The frown is where I spent the most time and will have to re-visit.  The CRL model helmet isn't accurate to the movie and I want to get this cut out and fitted like the movie helmet.  The frown piece sits behind the opening and there is a seam there.  The most difficult part is going to be cutting the frown from the inside of the helmet and getting the edges just right so the frown piece will sit correctly.  I'll probably have to head up the frown piece to get it to merge/sit correctly.  I'll cross that bridge when I get to that part.  I'll need to cut more of the frown out but that will be for another day.

IMG_1307_zpsylv3uy7j.jpg

IMG_1308_zpscgxionwz.jpg

IMG_1309_zpsigwelqup.jpg

You can see how much more I'll need to cut and how it sits right now.  

  • Like 1
Link to comment
Share on other sites

Make sure you take the time to wash off all the resin parts to your TK kit. The chemical released during curing can and will cause glue not to stick and the worst it does is not allow paint to stick. Wash with soap, rinse and air dry.

 

IMG_1317_zps9yrhlwzf.jpg

  • Like 1
Link to comment
Share on other sites

So I've been bouncing back and forth the past few days between each piece and the 501st CRL. What I will tell anyone building a R1 TK using the CRL model photos as reference will build garbage. To me it looks like someone took an OT TK and turned it into a R1 TK.  IMHO FISD needs to re-do the R1 TK CRL and adjust the basic level 1 requirements and remove ALL OT TK items they have mixed in.  You need to go by the text when building HSP R1 TK armor or you will mess it up.  . If you try to build your R1TK by the basic level 1 text you'll screw this armor up! Trust me you need to look at level 2 and level 3 text to build this armor. For photo references you need to google "rogue one stormtrooper" and use the movie photos you find. The belt on the R1 TK is overly detailed and IMHO will be the most difficult to cut and get correct. Second will be the frown in the helmet.  You can also use this fantastic reference right here on FISD:

 

There are some great reference photos for almost every angle of this armor and will be a huge help for anyone building anyone's set of R1 TK armor.

 

If you've built any R1 armor you are going to have a big advantage building this armor because almost all of it is a combination of shoretrooper, deathtrooper and tank driver/commander armor. I've got all three of those sets of armor and it is HUGE for me to have that. Like yesterday when I was rough trimming all the ABS pieces I took out one of my ST shoulder bells, put it inside the HSP shoulder bells, marked and trimmed. No guessing on a cut line!

 

So I've rough trimmed all the ABS pieces and I have both of my thighs glued on the front and drying. For the thighs, shins and fore arms you can glue down the front side of them without measuring because it doesn't matter at this point. They will all need trimmed down and when I get to that point I'll explain how I do it. The big thing I'm trying to get done as fast as I can is getting all the pieces trimmed and finish sanded, ABS and resin. I'll get some pics up at some point but they aren't anything special at this point.

 

 

 

Link to comment
Share on other sites

I have all my ABS pieces rough trimmed and final sanded now.  I've started gluing together pieces.  I start by gluing together the front/outside of all the pieces I can which include:

 

Bicep

Forearm

Thigh

Shin

 

I do not feel, never have, that you need to start fitting the parts to you body at this point.  These suits were made on an assembly line of some kind and made to fit different body types.  What I mean is they didn't fit a single suit to a single person.  Each suit was made to fit different height, weight, and body size.  I don't feel that a perfect fitting set of TK armor matches what is seen on screen.  That said this WILL fit my body very closely when I am finished.  The cover strips are the big thing here.  They will cover up the seams on the front and back when fitted to my body.  If there is too much excess I'll cut each piece down until it fits me.  Key here is not to get hung up on things that don't need to be hung up on.  

IMG_1321_zpsddop8kal.jpgIMG_1322_zps3jpm9jli.jpg

 

The next thing I'm going to say goes against the CRL 100%.  The back plate.  I not convinced that the back plate that goes over the kidney sections is removable.   On my Shoretrooper it is glued down and I open on the left side down the black line and my belt overlaps backwards.  On my Deathtrooper the front and back armor is all one piece and comes together like a clam shell and splits down the sides.  My Tank Commander is the only set of armor that opens under that kidney back plate and it doesn't like to stay on and pops off very easy.  My theory goes back to having these sets of armor fit different people and how the belt connects on the left side.  I'd be more in line with splitting and adjusting on the left and right sides down the ab sides and down that black line and adjusting the belt overlap on each side.  You'd easily be able to tighten up the armor or let it out a bit.  So when I build mine I'm going to first see if the kidney plate has enough reach without cutting down the middle.  I'll glue the center plate onto it if it does.  If it doesn't and needs more reach I'll cut it and use the center plate to glue it further out and give me the reach.  Either way I do it that center plate will be glued down BUT it'll appear to not be glued down.  I'll leave the outer edges un-glued to give that appearance.  

IMG_1324_zpsiu19tjw1.jpg

 

Nothing I'm doing is sexy with the armor now.  All the abs is final sanded as much as I can until I fit, glue, and add the resin bits where needed.  I still need to sand down all the resin bits and work on the helmet frown.  

  • Like 1
Link to comment
Share on other sites

Hi Wally

Work is already taking place re writing the R1 CRL and it is in the 501s section atm so its visible to members for input.

Please bare in mind the CRL was written before the movie was released so it was put together on limited information, display photos and at a time no one was making R1 armour, so you can forgive those that were desperate to get something together to troop asap.

 

Who is HSP by the way?  I have not heard of them before and am interested to know more.

 

 

Link to comment
Share on other sites

Hi Wally
Work is already taking place re writing the R1 CRL and it is in the 501s section atm so its visible to members for input.
Please bare in mind the CRL was written before the movie was released so it was put together on limited information, display photos and at a time no one was making R1 armour, so you can forgive those that were desperate to get something together to troop asap.
 
Who is HSP by the way?  I have not heard of them before and am interested to know more.
 
 
HSP is Head Shot Props. Joe has a website and Facebook page and there is also a R1TK group under his page for those of us with his kits.

Sent from my LM-V600 using Tapatalk

Link to comment
Share on other sites

3 minutes ago, MMcFett said:

HSP is Head Shot Props. Joe has a website and Facebook page and there is also a R1TK group under his page for those of us with his kits.

Sent from my LM-V600 using Tapatalk
 

Ahh, ok sorry lol yep I know Head Shot Props

  • Like 1
Link to comment
Share on other sites

TC5800, I echo Sly11 comments. The CRLs were heavily discussed here in the Rogue One section starting on July 20th 2016 and the film was not released until December 16, 2016. I believe most of the CRLs were carried over from the OT TKs as a starting point and then reworded for the ROTK with what was know at the time. It is one of the reasons I have proposed the new changes to the CRLs. As for the pics, most of them are of Jimmiroquai's armor since at the time he was the only source of the armor. His armor is very accurate but not perfect. It is my hope that the proposed rewrite will be more detailed and easier to follow. BTW, great job on your kit so far and this build thread should be moved to the Rogue One Build Threads section (That link at the top of the rogue one section).

Link to comment
Share on other sites

On 8/13/2020 at 9:58 AM, 11b30b4 said:

TC5800, I echo Sly11 comments. The CRLs were heavily discussed here in the Rogue One section starting on July 20th 2016 and the film was not released until December 16, 2016. I believe most of the CRLs were carried over from the OT TKs as a starting point and then reworded for the ROTK with what was know at the time. It is one of the reasons I have proposed the new changes to the CRLs. As for the pics, most of them are of Jimmiroquai's armor since at the time he was the only source of the armor. His armor is very accurate but not perfect. It is my hope that the proposed rewrite will be more detailed and easier to follow. BTW, great job on your kit so far and this build thread should be moved to the Rogue One Build Threads section (That link at the top of the rogue one section).

I just saw it is getting a revision.  I'm glad FISD is on top of it.  I get the rush to get the CRL done.  The Ep7 Kylo was a hot mess when it was posted before the movie so I get it.  

 

If an Admin could move my build thread that'd be great.  I didn't even notice the section for the build threads.  My fault 100%.

  • Like 1
Link to comment
Share on other sites

6 minutes ago, TC5800 said:

If an Admin could move my build thread that'd be great.  I didn't even notice the section for the build threads.  My fault 100%.

Done :duim:

  • Like 1
Link to comment
Share on other sites

So I got all the abs trimmed, sanded and final sanded.  I got all the resin pieces sanded and cleaned up.  The big thing I ended up doing was buying a table top belt sander to sand down the resin bits.  I can't tell you how fast that went compared to hand sanding or palm sanding.  

 

I also worked a BUNCH on the frown on the helmet.  I cut it out and had to grind down inside the helmet a lot to get the frown to even look good.  I sanded more and more and it just didn't look right.  I kept looking at reference pics and the frown and couldn't figure out WTF I could do to make it look right and then it hit me.  I need to have a thicker wall down into the frown so I backed the frown opening with tape and filled the entire thing with poly flex.  After letting it sit for 2 days I sanded it down on the outside and put the frown piece over the filled in opening and traced the hole I wanted.  After I did that I cut out the frown with a dremel cutting disk.  I sanded down the inside piece with fine sandpaper.  I held the frown piece in the opening and it still didn't look right.  I'm looking at the movie helmet and comparing and the frown just sits too far down and in the hole.  I'm not sure if the frown piece provided is suppose to sit behind the opening made in the helmet OR if you are suppose to cut out an even bigger opening and glue/sand in the frown.  So I had an idea to sand down the frown piece so the teeth sit almost flush with the opening inside.  I sanded about 50% away and it was still too deep.  I ended up taking almost all the top of the teeth part away with the belt sander.  As you can see the teeth sit almost as they do in the movie helmets.  I almost wish I could get just the teeth pieces and glue them in.  I might try to figure that out later but for now I am happy.  Lots of work to get it right.  It's important to point out here that no one makes perfect armor and bits.  You've go to "figure things out" to make things work sometimes and especially when a Maker makes new armor.  I think this frown piece is the trickest part on HSP's armor so far.   I'm overall happy with everything HSP has provided with this kit.  

 

I also started gluing resin pieces.  I glued the OII piece into the backplate and the first strip on the ab section.  When I glue resin to ABS I rough up the abs section.  I also use 5 Minute epoxy.  If I end up having problems with them staying I'll screw small screws from behind the ABS pieces into the resin.  I've done that on my Shoretrooper and Mudtrooper and it works.  

IMG_1407.JPG

IMG_1408.JPG

IMG_1409.JPG

IMG_1406.JPG

IMG_1405.JPG

  • Like 1
Link to comment
Share on other sites

So there are a couple "issues" that'll need addressed with the ab armor.  First the center strip.  I'm not overly sure it matches the movie references 100% but I'm working with it.  You'll need to add the small rectangle holes as I've done.  Now the stupid starts because sometimes you see them and sometimes you don't.  They'll probably show on me since I'm 6 feet tall.  I got all the ab section glued down now.  

 

On the back plate you'll need to fill the hole on the left shoulder piece like I did.  LEAVE the circle hole on the right shoulder.  

 

I've got more work to do on the helmet specifically to drill out and file down the vent tubes and heat up and form the frown teeth back piece.  Once that is done the helmet is ready for paint.  I've got "U" shaped gasket on the way for the bottom helmet trim.  

 

After that I'm onto fitting the ab/kidney section then I'll go down to the thighs and shins.  It's getting there.  I'm not an expert on it so I have to keep bouncing between the CRL and reference pics a lot.  

IMG_1431.JPG

IMG_1433.JPG

Star-Wars-Rogue-One-Stormtrooper-Hot-Toys-Figures.jpg

IMG_1432.JPG

  • Like 2
Link to comment
Share on other sites

Nice progress Wally :popcorn:

It's good to finally see some R1 TK's being built again, i know you are only just recently into this build, but we are working on a complete re-word of the R! TK CRL and are welcoming any feedback on the proposal. It is designed to make it a more clear explanation and help reduce grey areas in the language. It wont affect your build as you started before we did plus we always have a grace period for those working on the armour.

 

Please when you have some time, take a look and by all means offer comment in the thread.

 

 

 

  • Like 1
Link to comment
Share on other sites

19 hours ago, MMcFett said:

Where did you get the helmet gasket from? I'll be needing some as well.

Sent from my LM-V600 using Tapatalk
 

I found a link in one of the other threads to an AliExpress page and I ordered some.  

 

https://www.aliexpress.com/item/32929669955.html?spm=a2g0s.9042311.0.0.46784c4dHxmmqf

  • Like 1
Link to comment
Share on other sites

Tonight I started to fit the ab and kidney sections.  After test fitting I had to split the back apart and I needed to trim down on the sides.  Why?  The black line on the sides is where I'm using the same thing I did on my Shoretrooper.  I will back that seam with black velcro so it'll open on the left or right side instead of the back.  On the lower back center piece I glued from the inside and used ABS sludge to bond together so it doesn't come apart.  Since the glue/sludge is on the inside the outside will give the same appearance of "opening there" like in the movie.  

 

Well the biggest issue I thought would happen started tonight.  As I was fitting and flexing the ab section both of the side resin greeblies popped off.  I used JB Weld brand 5 minute epoxy.  I roughed up the back of each resin piece and also the ABS section they glued down to.  Still came off with little flex.  This isn't a Maker issue with HSP's parts.  This is an issue across the board trying to adhere resin to ABS.  What I did on the left lower greeblie was screw in two small recessed head screws into it from behind the ABS so it won't come off.  I'll do this to the center and the smaller one once the glue dries.  So here is the bigger issue/question that some of you might have answers for me but I don't know.

 

The biggest problem I'm going to run into is gluing the resin pieces on the top of the shins and lower thighs along with the shims/cover strips on the shins, thighs, fore arms, and biceps.  The thighs, shins, and biceps all will velco in the back.  When I put on the shins, thighs, fore arms, and biceps I'm going to have a LOT of flex and those resin pieces are going to pop off.  WHAT am I to use to hold them down?  I've tried the following on this and previous builds:

 

JB Weld 5 minute epoxy

JB Weld 1 minute epoxy

Gorilla Glue 5 minute epoxy 

Gorilla glue gel super glue

 

None of that will hold the resin down to the ABS when it flexes.  It just pops loose.  I can use the screw method on the ab section, sniper plate and lower thigh ammo strip but those cover strips and top of shins and lower thigh pieces aren't going to hold down at all.  As soon as I open them up to put on they are going to pop right off.  I am going to see if there are shorter screws then I am currently using because those pieces are so thin but I'm not sure.  Has anyone had any type of glue they have used that will hold up to flexing?  

 

 

IMG_1438.JPG

IMG_1439.JPG

Link to comment
Share on other sites

You will find most epoxy and quick drying glues will pop off with any flex, I find using E6000 on areas that flex is the best. 

 

 

 

Link to comment
Share on other sites

So I got some E6000 this morning and went to work this afternoon when I got home.  It's "better" but not great.  I still used small screws and drilled them in from behind to hold the resin in place to the ABS pieces.  I started by heating up the resin pieces and molding them to the ABS pieces an used clamps to secure while they cooled down.  They aren't perfect but they will work fine for basic approval.   I have them taped up and baking in the sun so they warm up and form better.  I'll do this the next few days so they form and stay that way.  

 

I also tore the center section off the ab section and modified it.  I also used screws from behind to secure it.  I also test fitted the entire ab section to my body and it held good.  I'll add suspenders later.  Notice the black on the sides?  That is the velcro that opens up.  I might end up adding 2" on the front side of the ab section so it is further back like in the movie.  It'd also give me a little more room.  

 

I also rough cut the belt and boxes out.  The next step here is to heat the belt up and form it.  My shop is above and behind an automotive garage and there are 55 gallon drums outside.  I'll heat up the belt pieces and form them over the drums.  I won't cut out any of the belt notches until it is formed and contours with the ab section.

 

I am seeing the finish line here now.  The resin to ABS was holding my brain up but now I got it.  

 

IMG_1462.JPG

IMG_1460.JPG

IMG_1459.JPG

IMG_1456.JPG

IMG_1457.JPG

IMG_1458.JPG

IMG_1455.JPG

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...