CgyMedicTrooper Posted February 12, 2020 Report Share Posted February 12, 2020 Good afternoon everyone. What tools do i need to trim and file my kit to make it fit? Quote Link to comment Share on other sites More sharing options...
Sn4k3 Posted February 12, 2020 Report Share Posted February 12, 2020 (edited) Hey brother Here is a list of some of the things you will and some other may need: - E6000 - Spring clamps (x4) - Sand paper 220 - Rare earth magnets (x20) - Large half round file - Small file set - Lexan scissor curved & flat - Line 24 snaps - Snap setting tool - Locking plier - Flat screwdriver - Bifurcated/split Rivets 5/16 (8mm) - Single cap rivets - 1 inch wide black elastic (shoulder) - 2 inch wide for ab/back plate - Heavy duty tim scissor - Metal ruler (cut cover strips) - Hand rivet gun - Blue painter's tape (hold pieces together) - Buthane lighter (seal elatics ends) - 1 inch foam padding - 2 inch wide heavy duty velcro - Small brushes - humbrol paint #85 coal black Satin - Humbrol paint #14 french blue gloss - Humbrol paint #5 dark admiralty gray gloss - Frown mesh - Soldering iron (open holes in elastic) - Respirator (safety) - Protection gloves (safety) - Silicon heatgun - Dremel - Sand block 180 - X-acto blade - Heavy duty razor knife - Metric ruler - Large half round file Sorry that i dont have the pictures of all the things, soon I'll make a thread about this, with pictures Edited February 12, 2020 by Sn4k3 1 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted February 12, 2020 Report Share Posted February 12, 2020 Hey Wade most popular are an Exacto knife and/or scissors. Another option, though a bit on the expensive side is a stationary belt sander. Exacto and sander are my tools of choice personally Quote Link to comment Share on other sites More sharing options...
TKSpartan[Staff] Posted February 12, 2020 Report Share Posted February 12, 2020 Hi, you may want to check this post. line 15-16-17 cheers Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 12, 2020 Report Share Posted February 12, 2020 2 hours ago, Sn4k3 said: Sorry that i dont have the pictures of all the things, soon I'll make a thread about this, with pictures I have one here (with photos) that I did about 5 years ago, Daniel: https://www.whitearmor.net/forum/topic/31404-supply-list-for-your-ot-tk-build/ Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 12, 2020 Report Share Posted February 12, 2020 3 hours ago, CgyMedicTrooper said: Good afternoon everyone. What tools do i need to trim and file my kit to make it fit? Please see link in the post above, Wade, and always feel free to ask any questions you need to! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.