Jump to content

My Doopy Doo E11 build


Jakebullet

Recommended Posts

Trying this again, hopefully I can get the photos to work this time . Starting my kit, hoping to get a bit of building experience before the armour arrives. I started off washing everything and sanding down. Tidied up, got rid of the rough edges. d86e3db0d601fb13f4feeebdbdbf0026.jpg375f21770885a4698916d927454d159c.jpg7c923a6394518411c789b092fc3facb0.jpgd087ba91008be98b8bfd15b210674c04.jpge0ee5dbb8a32d0154cc33376d7d3547c.jpg

Link to comment
Share on other sites

Hi,

this time it worked !

Do you have any plans to add some electronics to your project?




Gesendet von iPhone mit Tapatalk
Hi there, no not putting electronics in at this stage, going to keep it fairly simple, just doing the easy mods for now
Link to comment
Share on other sites

Hi Jakebullet,




Yes, the three should be there. The real M38 scope had them.



Sent from my iPhone using Tapatalk
Oh thanks, weird how I've never spotted that in any of the photos I've seen, hhen again I missed the screw type too!
Link to comment
Share on other sites

Oh thanks, weird how I've never spotted that in any of the photos I've seen, hhen again I missed the screw type too!


Yeah, I had trouble seeing them on some of the photos, most of the ones I saw were of the reverse side without the number.


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

Nice progress, Jake.

Ā 

When you switch to a slotted screw for the grip, be sure to position it in the ā€œlockā€ position (not free). See below;

Ā 

f97cfffd8a8eb208d6b4d98e32a79a82.jpg&key=1c7d64f696df495e8f3d83c18e11c39054af0acafa6ee9da8a4c79a551da21fe

Ā 

Example

3de3383e377c494a792ffd774a7a840b.jpg&key=b2e2aa44f655b58ee5bc659b1206e51a36d0f3db96d5d9794926a1765a612682

Ā 

Keep up the good work. :-)

Dan

Ā 

  • Like 1
Link to comment
Share on other sites

Nice progress, Jake.
Ā 
When you switch to a slotted screw for the grip, be sure to position it in the ā€œlockā€ position (not free). See below;
Ā 
f97cfffd8a8eb208d6b4d98e32a79a82.jpg&key=1c7d64f696df495e8f3d83c18e11c39054af0acafa6ee9da8a4c79a551da21fe
Ā 
Example
3de3383e377c494a792ffd774a7a840b.jpg&key=b2e2aa44f655b58ee5bc659b1206e51a36d0f3db96d5d9794926a1765a612682
Ā 
Keep up the good work. :-)
Dan
Ā 
Thanks Dan, I've done that now
  • Like 1
Link to comment
Share on other sites

Nice jobĀ so far, Jim!Ā  If I could make a small suggestion, it would be to sand down the rough edges on the trigger guard and trigger before painting.Ā  The reason being is that these areas will get a lot of use simply from inserting your fingers and cause the paint to wear off, showing the white resin underneath.Ā  Doopydoos makes a great kit, and before long you will have a blaster you can be proud of!!Ā  Keep the photos coming!

Ā 

o6EKn8B.jpgĀ  Ā Ā rJ3ZdyA.jpg

  • Like 1
Link to comment
Share on other sites

Nice jobĀ so far, Jim!Ā  If I could make a small suggestion, it would be to sand down the rough edges on the trigger guard and trigger before painting.Ā  The reason being is that these areas will get a lot of use simply from inserting your fingers and cause the paint to wear off, showing the white resin underneath.Ā  Doopydoos makes a great kit, and before long you will have a blaster you can be proud of!!Ā  Keep the photos coming!
Ā 
o6EKn8B.jpg&key=70df11297a7075e17013fa7814382035440861fc570ab8d24e8dc618bd8853cfĀ  Ā Ā rJ3ZdyA.jpg&key=d7307bfdd0ccc292910b7c6a770666a41580203274fda8f410dcbafdf61b44d0
All suggestions gratefully received! I'll give them a good sanding before painting thanks
Link to comment
Share on other sites

Next I drilled out the resin screws at the end of the barrel and glued in 2 chopped off heads in the place, I later got some green stuff to tidy up underneath. I also drilled out the resin screw from the bottom of the handle and screwed in a real one, that at least was nice and easy!df4366ed6e7ea1096838f5d924ad5aab.jpg8b99164e4d67b3b100bba5a61f7bfc2b.jpg2112d9d839a142d073fec6285eff7c01.jpg

Link to comment
Share on other sites

Next I glued in the magazine then came the absolute bloody nightmare that was the scope.... I decided I was going to install a screwdriver head, carefully dremmelled at the top. As you can see I made quite the mess so more green stuff was deployed. I think I saved it 2f24809cebfdfd637354e8720ebfaffb.jpg3d783e4d628e1ad00e068d6ad7828ecf.jpgb69b13a44c2b715fd5fefffde8d743a6.jpge3257818662a93ec3395a42fdbae6f96.jpgc1719b7178b51908cdd5d6fababa2c97.jpg

  • Like 1
Link to comment
Share on other sites

Nice work, Jake. :-)

Front scope doesnā€™t look that bad. Good recovery.

In an ideal work, the hex bolt in the bottom of the grip would be pretty much flush with the grip itself. Looks like you could go another 3mm or so to level it off.

c529ff9cff6d4c57da7c2c1e83775386.jpg

  • Like 1
Link to comment
Share on other sites

Nice work, Jake. :-)

Front scope doesnā€™t look that bad. Good recovery.

In an ideal work, the hex bolt in the bottom of the grip would be pretty much flush with the grip itself. Looks like you could go another 3mm or so to level it off.

c529ff9cff6d4c57da7c2c1e83775386.jpg&key=5e1cf7f200c3b6a28e8072ec5b5b040520aaadd25dd14a42ea53f7946f74175b
I did think maybe it was sticking out a bit much, thanks I'll drill a bit deeper
  • Like 1
Link to comment
Share on other sites

Only thing i still need to get to hopefully get it through to Centurion level is a counter as I don't think the dummy one that comes will clear. Any ideas on where to get one?

The doopydoos one will be fine for Centurion. In fact, the whole kit is fine for Centurion if done correctly. The areas that are often upgraded are the magazine (DD one is tiny) and the D-ring on the back. These might be mentioned at centurion level as suggested upgrades. :-)
  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...