Jump to content

A New Hope: Episode 42 - A First Build! (Anovos)


vortex512

Recommended Posts

Hey Everyone,

 

I had the long wait for my Anovos armor. When it arrived it was the day before our family moved from Orange Park, FL (Jacksonville area) to Columbia, MS (30 minutes west of Hattiesburg). That was July 3rd 2017. Fast forward to today and I am finally settled in and able to begin my first ever build. To say I'm excited, nervous, and all the rest is an understatement. I have been acquiring items, tools, and a workbench. Plus I have recently ordered additional items to further assist and hopefully improve my build (I'll be listing these soon). 

 

The aim is building to Centurion from the start. The struggle will be shims for the abs (6' 240lbs makes for some adjustments required) and my limited experience from model car building and miniatures painting. However, with all the encouragement and directions (not to mention awesome supplies/products) I've received so far from people like @ukswrath,  @justjoseph63,  @Darman,  @gazmosis, my friends I met in Squad 7 of Florida, and what I know the rest of this community will be able to offer, I believe I'll be able to make it to the goal.

 

So to begin I'm posting the following picture. 

 

 

The initial bucket on (July 2017):

krj1VdL.jpg

 

 

 

Link to comment
Share on other sites

To begin I've done tons of forums readings and have a question/concern regarding the bucket. I have the brow spacing that has been discussed recently so feel good there. It's the ear rotation and stripes I'm curios about. Are these good to go for Centurion? Or am I looking at some modifications that must be done for approval at this level? If so advice and guidance on how to accomplish it will be greatly appreciated. Remember, I'm not as skilled yet and would hate to damage or ruin it by some silly mistake!

 

lgJveZL.jpg

 

R7yAYLs.jpg

 

wGnpFiG.jpg

Link to comment
Share on other sites

Ear alignment at the moment is only a suggested "ideal look" and not a must for Centurion. If you did want to adjust these (depending on how Anovos helmets are assembled) normally you remove the ears screws and see if the angle can be adjusted, take not of any gap between the ear and helmet and if any sanding will be required, you will need to either elongate the current screw holes or drill new ones.

 

Some ear fitting tutorials:

https://www.whitearmor.net/forum/topic/29238-my-helmet-ear-tutorial/

https://www.whitearmor.net/forum/topic/41250-ear-trimming-made-easy/

 

-----------

 

Tube stripes should be a pencil width from the side of the cheek, this may be changing in upcoming CRL updates so you may need to address those but you could apply for EIB and see if you receive centurion feedback for those ;)

 

Can't quite make out your hovi tip mesh but the standard Anovos mesh needs to be changed for a more accurate mesh. Also the insides of the hovi tips are white and have a white rim.

 

-----------

 

I would also look at adding a little more paint on your teeth, they are quite short (Anovos helmets sometimes have overspray which would need to be removed also)

 

ANHSTUNTfrown2

 

Good luck looking forward to the progress

Edited by gmrhodes13
link removed no longer working
Link to comment
Share on other sites

GREAT to hear that you are aiming for Centurion!! In addition to what has been mentioned, for L3 you will need to change out the lower ear screws. For some strange reason Anovos uses the correct (slotted, flat topped countersunk) type on the top 2 but not the bottoms.

4osozQ1.jpg  ay1Yrwz.jpg?2

 

As Glen mentioned, the Hovi tip screens in the photo are not too clear, but as seen in the above images the mesh should be of the wide type.  I would also highly suggest painting the interior white. (;)).

 

I know you haven't got to this part yet, but the Anovos supplied canvas belts (unless they have changed them) were saggy due to no interior support system, and also came with 4 rivets attaching the holster (Hero style).   If it did indeed come this way, for level 3 the belt will need to be replaced, as it will need to be rigid and can not have any extra holes (even if they are patched). (;)).

 

My last suggestion would be to take the Velcro strapping system they supply and toss it.  Velcro can (and will) lose it's connective properties over time after repeated use, so I would go with the snap connections.  Better yet, use the double snap system.  This is what I and many others use, and although it takes a bit of extra time and supplies, you can rest assured that no connections will fail.  Ever.  If you need more info. on that just PM me.

Link to comment
Share on other sites

Hi Chirs.  Congrats on getting to the build!  You already got some feedback on the helmet and other items.  Keep in mind that these modifications are much easier than it sounds.  Check out the build thread section if not done so already - there are some very detailed Anovos builds in there (see ukswrath's build).  If you are feeling stuck - let us know.  The information here can seem pretty daunting so don't be afraid to ask any question.  Take your time and enjoy the ride.  Good luck!

Link to comment
Share on other sites

Hi Chris, welcome to FISD!!

You're totally right about all the support and encouragement to be found here. I recently finished my first build and it was all thanks to these fine folks. You're in good hands!

Some great points already made about L3 qualifications. The only one I have to add is that the blue tube stripes may be a bit too far away from the "cheek" line. Ideally, the should be a pencil's width away. I know this because I painted mine exactly how yours look now! :-)

Don't go spending time to change this yet, though! Last I heard, this is not currently an L3 requirement, but may soon be added to the CRL. Nothing needs to be changed now, but you (and I) might need to redo those tube stripes down the road on our way to L3. Just something to keep in mind!

Have a great time with your build. Looking forward to following along! :salute:

Edited by MakeNoiseMan
grammar
Link to comment
Share on other sites

On ‎4‎/‎5‎/‎2019 at 3:33 PM, vortex512 said:

 

 

lgJveZL.jpg

 

 

 

 

Yet another reason I hate Anovos...Those teeth look horrible...to me anyways. wish they didn't leave so much white and the top and bottom. Welcome though, and glad you finally got your stuff. Your in good hands here, and we will help you reach your goal of being amount the very best at L3.

Edited by Commander Gree
Link to comment
Share on other sites

2 hours ago, Commander Gree said:

Yet another reason I hate Anovos...Those teeth look horrible...to me anyways. wish they didn't leave so much white and the top and bottom. Welcome though, and glad you finally got your stuff. Your in good hands here, and we will help you reach your goal of being amount the very best at L3.

Well you can't hate them too much most armor doesn't come painted period  :laugh1:

Link to comment
Share on other sites

Yet another reason I hate Anovos...Those teeth look horrible...to me anyways. wish they didn't leave so much white and the top and bottom. Welcome though, and glad you finally got your stuff. Your in good hands here, and we will help you reach your goal of being amount the very best at L3.

Ouch! ;-)

 

Some screen used troopers looked a bit like this, to be honest. However, as the CRL is based around an idealised look so steers away from this type of look.

 

e50352624cca4595568d89f1d1010772.jpg&key=977f5540a7b9de8735c22bad8e9ecf4f108f944adf25a95e17206b763962ebb1

 

 

Keep up the good work, Chris :-)

 

Link to comment
Share on other sites

Ouch! ;-)
 
Some screen used troopers looked a lot bit this, to be honest. However, as the CRL is based around an idealised look so steers away from this type of look.
 
e50352624cca4595568d89f1d1010772.jpg&key=977f5540a7b9de8735c22bad8e9ecf4f108f944adf25a95e17206b763962ebb1
 
 
Keep up the good work, Chris :-)
Sorry I have to disagree. None of these pics look like the Anovos paint. But as we said we dont go for screen used, we go for standardized

Sent from my SM-G950U using Tapatalk

Link to comment
Share on other sites

On 4/9/2019 at 3:41 AM, justjoseph63 said:

You will also need to get some gray paint (Humbrol # 5 or Testors # 1138) and redo the teeth as shown:

 

 AfP1Xw8.jpg?1

That diagram helps greatly! I have ordered the Humbrol paints and once they arrive I'll get to those teeth.I was happy this bucket doesn't seem to have overspray, but felt something was off with the frown, but wasn't completely sure. 

Link to comment
Share on other sites

On 4/9/2019 at 8:41 AM, Commander Gree said:

Yet another reason I hate Anovos...Those teeth look horrible...to me anyways. wish they didn't leave so much white and the top and bottom. Welcome though, and glad you finally got your stuff. Your in good hands here, and we will help you reach your goal of being amount the very best at L3.

Thank you! What's interesting is the poster they packed with this kit shows full teeth not like the actual bucket. So apparently somewhere along the line the "less is better" mantra must of kicked in. :)

Link to comment
Share on other sites

On 4/8/2019 at 10:34 AM, wook1138 said:

Hi Chirs.  Congrats on getting to the build!  You already got some feedback on the helmet and other items.  Keep in mind that these modifications are much easier than it sounds.  Check out the build thread section if not done so already - there are some very detailed Anovos builds in there (see ukswrath's build).  If you are feeling stuck - let us know.  The information here can seem pretty daunting so don't be afraid to ask any question.  Take your time and enjoy the ride.  Good luck!

I appreciate it. It is great to have this group for guidance and encouragement. 

Link to comment
Share on other sites

On 4/6/2019 at 3:07 AM, justjoseph63 said:

GREAT to hear that you are aiming for Centurion!! In addition to what has been mentioned, for L3 you will need to change out the lower ear screws. For some strange reason Anovos uses the correct (slotted, flat topped countersunk) type on the top 2 but not the bottoms.

4osozQ1.jpg  ay1Yrwz.jpg?2

 

As Glen mentioned, the Hovi tip screens in the photo are not too clear, but as seen in the above images the mesh should be of the wide type.  I would also highly suggest painting the interior white. (;)).

 

I know you haven't got to this part yet, but the Anovos supplied canvas belts (unless they have changed them) were saggy due to no interior support system, and also came with 4 rivets attaching the holster (Hero style).   If it did indeed come this way, for level 3 the belt will need to be replaced, as it will need to be rigid and can not have any extra holes (even if they are patched). (;)).

 

My last suggestion would be to take the Velcro strapping system they supply and toss it.  Velcro can (and will) lose it's connective properties over time after repeated use, so I would go with the snap connections.  Better yet, use the double snap system.  This is what I and many others use, and although it takes a bit of extra time and supplies, you can rest assured that no connections will fail.  Ever.  If you need more info. on that just PM me.

Would you happen to know the size of those slotted screws? If not no biggie, I'll just take one of the upper ear screws with me to the store.

 

I do intend on ordering a belt from Kittle. BUt need to complete the trimming and then measure. 

 

For the strapping I was going with the brackets from @Mr. No Stripes I was originally considering the snaps. I suppose if these should fail me then I'll need to go to the snaps.

 

 

Link to comment
Share on other sites

On 4/5/2019 at 6:19 PM, gmrhodes13 said:

Ear alignment at the moment is only a suggested "ideal look" and not a must for Centurion. If you did want to adjust these (depending on how Anovos helmets are assembled) normally you remove the ears screws and see if the angle can be adjusted, take not of any gap between the ear and helmet and if any sanding will be required, you will need to either elongate the current screw holes or drill new ones.

 

Some ear fitting tutorials:

https://www.whitearmor.net/forum/topic/29238-my-helmet-ear-tutorial/

https://www.whitearmor.net/forum/topic/41250-ear-trimming-made-easy/

 

DaveMANH02.jpg

 

Tube stripes should be a pencil width from the side of the cheek, this may be changing in upcoming CRL updates so you may need to address those but you could apply for EIB and see if you receive centurion feedback for those ;)

 

Can't quite make out your hovi tip mesh but the standard Anovos mesh needs to be changed for a more accurate mesh. Also the insides of the hovi tips are white and have a white rim.

 

DaveMANH01.jpg

 

I would also look at adding a little more paint on your teeth, they are quite short (Anovos helmets sometimes have overspray which would need to be removed also)

 

ANHSTUNTfrown2

 

Good luck looking forward to the progress

Thank you for all of this information. Very helpful! 

 

I'm about to upload some new photos of the recent activity I've been up to. In it will be a few more bucket pics.

 

I'll hold on the tube stripes for now.

  • Like 1
Link to comment
Share on other sites

On 4/5/2019 at 5:44 PM, ukswrath said:

Awesome. Can't wait to see your build. BTW Gaz was my inspiration and my DO predecessor. You're in good hands here.

I received all the electronics and have placed them in the bucket. Let me say, I'm very impressed. If you see any issues with my set-up in the pictures I'm about to show, please let me know. 

Link to comment
Share on other sites

Thank you everyone! Since the last post I've accomplished tow projects. First is the Husky Storage bin. It was time to move the kit from the BBB and into its new home.

 

Here is the before and after pictures.

 

YeanC1V.jpg

 

Yuu can barely see the top of one of cat's head next to the bin on the far right. Open box seems to be an invite to them! :)

 

KSfWsEZ.jpg

 

Found this foam at Wal-Mart. Depending on how much space is available once the kit is trimmed, I am considering adding another 1/2 inch of foam on the bottom.

 

F5gpZCb.jpg

 

The fabric came from Jo-Anns Fabric (3 1/2 yards long for those like me who are fabric shopping challenged). After measuring the interior we (my daughter is my official build-assistant) cut the foam to fit. In hindsight, cutting foam with a retractable razor on your dining room table is not smart. After a small cut line on the table, all work shifted to my portable workbench! 

 

We then used the foam to cut the fabric to size. The Fabric was attached to the foam using spray adhesive (see below picture). This was bought at Wal-Mart. Cost less there than the fabric store. It starts drying quickly so had to spray over the foam surface and then we placed the fabric on the foam holding it tight and then smoothing out wrinkles. You definitely need to do this outside as the spray makes everything it touches tacky, plus has a somewhat strong odor.

 

bcPrpeW.jpg

 

Attached velcro to the back of the foam on all four corners. The top, and front/back sides also have velcro in the middle along the top edge and bottom edge due to the overall length. 

 

Here is the final product.

 

MFuw62A.jpg 

 

And with the tool box (soft goods holder) inserted.

 

qmg3hCv.jpg

 

All in all rather happy with how this turned out!

  • Like 2
Link to comment
Share on other sites

My other accomplishment has been the installation of the electronics set-up from @ukswrath. Let me say, if you need anything like this I am quite impressed. Hearing assist, hovi mic speakers, cooling fans bracket. Added a Bluetooth transmitter and Bluetooth earbuds to keep me from being "plugged" into the bucket with traditional earbuds. 

 

 

Here are the hovi mics from the speaker system. The plastic ones simply unscrewed from the bucket. I had to then drill a slightly larger opening for the speaker posts, but was very easy to put in. Aside from the sound ability, I believe these make my hovi tips Centurion rated. The original ones were going to need some interior painting if they remained in place.

qfqsoOv.jpg

 

 

Interior electronics. I wish I could make them look a bit more organized. Good news is no one really looks inside except when I'm showing it.

HwrmPRO.jpg

 

After playing around trying to fit it to my ear. I remembered that this could be mounted in the bucket. That's what I've done here and I much prefer that set-up.

OWTUqAv.jpg

 

  • Like 2
Link to comment
Share on other sites

I have a doopy E-11. But I want to take my time on that build as I would love to make it as real and functioning (lights/sound) as possible. The completion kits and sound kits will require some more purchases, but for now that will be my afterwards project. In the meantime I ordered and just received my E-11 from Praetorian Blasters. A bit of nerd out time occured as I walked around the house with it and then watched a show while using it to point to things for my wife and daughter. :)

 

It's well made and if you didn't know some of the parts look like real metal! This appears to be L3 ready. 

 

kAjkcHx.jpg

 

DUWoHKC.jpg

 

6wSL3X7.jpg

 

FWf45wK.jpg

 

Lt2K8sm.jpg

  • Like 1
Link to comment
Share on other sites

Now for today...

 

I am beginning the part that has me the most anxious. Trimming! I have my guide printed (@ukswrath) and am going to trim it all out before beginning the sizing. Once trimmed I'll post pictures of the pieces for feedback and directions. I know there are parts where there should be no return edge (i.e. the wrist end of the forearms), but if someone is able to list all the parts and which ends of each part, should not have a return edge for the Centurion level, it would be of great assistance!

 

C1bnhAs.jpg

  • Like 1
Link to comment
Share on other sites

Now for today...
 
I am beginning the part that has me the most anxious. Trimming! I have my guide printed ([mention=21566]ukswrath[/mention]) and am going to trim it all out before beginning the sizing. Once trimmed I'll post pictures of the pieces for feedback and directions. I know there are parts where there should be no return edge (i.e. the wrist end of the forearms), but if someone is able to list all the parts and which ends of each part, should not have a return edge for the Centurion level, it would be of great assistance!
 
C1bnhAs.jpg&key=997b0544d0789b5463cadcf49053beb8f537f8dcd9a1f5d09141ea92d122447d

Hiya

Wrist end of the forearm is the only place where the return edge MUST be removed for L3. The rest is pretty much down to personal preference. Personally, I like the look of screen used armour so the FISD gallery is the place to go for that. Here’s a couple of examples;

2cc0d5a1c1d08e5307b758db224ad43e.jpg

2df4fcf2ab29a493ac27b632dbcf7214.jpg

4976c20b807f82d8da71fb6866935fab.jpg

564925c0f66057f4966e74fe93ae441e.jpg

:-)
Link to comment
Share on other sites

3 hours ago, vortex512 said:

My other accomplishment has been the installation of the electronics set-up from @ukswrath. Let me say, if you need anything like this I am quite impressed. Hearing assist, hovi mic speakers, cooling fans bracket. Added a Bluetooth transmitter and Bluetooth earbuds to keep me from being "plugged" into the bucket with traditional earbuds. 

 

 

Here are the hovi mics from the speaker system. The plastic ones simply unscrewed from the bucket. I had to then drill a slightly larger opening for the speaker posts, but was very easy to put in. Aside from the sound ability, I believe these make my hovi tips Centurion rated. The original ones were going to need some interior painting if they remained in place.

qfqsoOv.jpg

 

 

Interior electronics. I wish I could make them look a bit more organized. Good news is no one really looks inside except when I'm showing it.

HwrmPRO.jpg

 

After playing around trying to fit it to my ear. I remembered that this could be mounted in the bucket. That's what I've done here and I much prefer that set-up.

OWTUqAv.jpg

 

Looks nice Chris 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...