Mworm1974[TK] Posted March 2, 2019 Report Share Posted March 2, 2019 Hi all, Are there any set measurements for the matt black stripe from the front of the helmet to the rear with regards to the width? Any guidance would be greatly appreciated. matt Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted March 2, 2019 Report Share Posted March 2, 2019 No exact measurement, I started at the front between the 2nd and 3rd teeth, keep a straight line when masking up and over the top, you can see the gap between the clip and painted line on top of the helmet is wider than the actual clip, then just continue to follow in a straight line directly down the back. A few references for you Also don't miss the small extended painted section on the side. Quote Link to comment Share on other sites More sharing options...
Mworm1974[TK] Posted March 3, 2019 Author Report Share Posted March 3, 2019 Thanks for that, I thought I would check before making taking the final step. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.