Jump to content

TK-50721 requesting ANH Stunt TK EIB status [WTF] (894)


Recommended Posts

Name : Jennifer Catania

501st TK ID : 50721

FISD forum name: JenEyre

Garrison: New England Garrison

Build Thread: https://www.whitearmor.net/forum/topic/42210-jeneyres-wtf-anh-tk-build/

Thank you to TK-26329 for helping with these pictures!

 

 

Mandatory Information

Armor = Walt’s Trooper Factory
Helmet= Walt’s Trooper Factory
Blaster= Hyperfirm B Grade
 

 

Optional

Height = 5’7”
Weight = 140 pounds
Boots = ImperialBoots.com
Canvas belt = Made myself
Hand Plates = JustJoseph
Electronics= Voice Electronics Maker
Neck Seal = Made myself
Holster = Made myself



 

Full Body

-Front – Arms at side

IMG_2215-X3.jpg

 

IMG_2217-X3.jpg

 

IMG_2221-X3.jpg

 

-Back – Arms at side

IMG_2219-X3.jpg

 

 

-Left – Arm raised

IMG_2225-X3.jpg

 

-Right – Arm raised

IMG_2223-X3.jpg

 

-Right Side Detail – Arm raised

IMG_2233-X3.jpg

 

-Left Side Detail – Arm raised

IMG_2226-X3.jpg

 

 

Armor Details

-Abdomen Details

IMG_2247-X3.jpg

 

-Action Shot (edit- accidentally made the original linked action photo black and white, so here's a copy of the original)

IMG_2235-X3.jpg

IMG_2235-X3.jpg

 

 

-Cod and Butt Plate Attachment

IMG_2249-X3.jpg

 

IMG_2250-X3.jpg

 

IMG_2251-X3.jpg

 

 

-Interior Strapping

IMG_2248-X3.jpg

 

 

Helmet Details

-Front (with flashlight inside to show lens color)

IMG_2252-X3.jpg

-Side

IMG_2254-X3.jpg

 

IMG_2258-X3.jpg

-Back

IMG_2255-X3.jpg

 

-Hovi Tip Detail

IMG_2269-X3.jpg

-Trim

IMG_2265-X3.jpg

 

 

Blaster Details

-Blaster – Left

IMG_2270-X3.jpg

 

-Blaster – Right

IMG_2271-X3.jpg

 

IMG_2272-X3.jpg

 

 

Accessory Details

-Neck Seal

IMG_2274-X3.jpg

 

-Thermal Detonator – Back

 

IMG_2276-X3.jpg

 

IMG_2277-X3.jpg

 

-Holster Attachment

IMG_2281-X3.jpg

 

IMG_2282-X3.jpg

 

Edited by jeneyre
Accidentally made the action shot pic I linked black and white, so I'm re-linking the original.
  • Like 1
Link to comment
Share on other sites

Hi Jennifer,

Great job. One of the team will be with you shortly.

In the meantime, could we please request a couple more photos for your application;

Lens colour (with light inside helmet if required)
Close up of thermal detonator screws
Front, left and right photos of sniper knee plate
Thigh ammo pack fixings (inside and out)

Thanks in advance

Dan

  • Like 1
Link to comment
Share on other sites

Thanks Dan! Here are those pics!

 

Lens colour (with light inside helmet if required)

 

IMG_2295-X3.jpg


Close up of thermal detonator screws 

 

IMG_2294-X3.jpg

 

IMG_2293-X3.jpg

IMG_2293-X3.jpg
Front, left and right photos of sniper knee plate

IMG_2296-X3.jpg

 

IMG_2297-X3.jpg

 

IMG_2298-X3.jpg

 

IMG_2301-X3.jpg


Thigh ammo pack fixings (inside and out) 

 

IMG_2283-X3.jpg

 

IMG_2284-X3.jpg

 

IMG_2285-X3.jpg

 

IMG_2287-X3.jpg

 

IMG_2289-X3.jpg

 

 

  • Like 1
Link to comment
Share on other sites

Nice work overall, just a couple of things to really compliment your build, your bottom ear screws look a little high on the sides, but may be ok for the DL's.

 

DaveMANH08.jpgIMG_2254-X3.jpg

 

You could paint the rims of your mic tips white

 

DaveMANH01.jpgIMG_2269-X3.jpg

 

A few of your black lines are a little wobbly, a good tip is go over with a permanent marker to help straighten them ;) 

 

Knee ammo strip could be a little higher at front

 

DSC02549.jpgIMG_2283-X3.jpg

 

You could also trim the curve section out of the top angle of the sniper plate so its a little straighter.

BpZlcs8.jpgIMG_2297-X3.jpg

 

You could also drop your forearms a little, there is a bit of a gap there at the gloves, will allow a little more movement at the elbows.

 

Good luck with approval

  • Like 2
Link to comment
Share on other sites

21 hours ago, gmrhodes13 said:

Nice work overall, just a couple of things to really compliment your build, your bottom ear screws look a little high on the sides, but may be ok for the DL's.

 

DaveMANH08.jpgIMG_2254-X3.jpg

 

You could paint the rims of your mic tips white

 

DaveMANH01.jpgIMG_2269-X3.jpg

 

A few of your black lines are a little wobbly, a good tip is go over with a permanent marker to help straighten them ;) 

 

Knee ammo strip could be a little higher at front

 

DSC02549.jpgIMG_2283-X3.jpg

 

You could also trim the curve section out of the top angle of the sniper plate so its a little straighter.

BpZlcs8.jpgIMG_2297-X3.jpg

 

You could also drop your forearms a little, there is a bit of a gap there at the gloves, will allow a little more movement at the elbows.

 

Good luck with approval

how did you get sniper knee to fit so well ?

Link to comment
Share on other sites

Thanks for the updated pics, Jennifer, and really nice job on that armor!  Unfortunately, we need one small fix before moving ahead.  The actual tips themselves are fine, but the mesh (weave) in your hovi-tip screens is too tight, and as per the CRL for level 2, it must be a wider weave. Correct 'Hovi mic' aerator tips There are a few places to get this, and if you need some sources just PM me.  Thanks!

 

l6Tqxna.jpg?1    jgJzznk.jpg?2  cotC39C.jpg?1

 

  • Like 1
Link to comment
Share on other sites

1 hour ago, phil said:

how did you get sniper knee to fit so well ?

That's not mine, but I did use a little heat and glued the sides first then once dry twisted the front, glued and held in place with magnets, clamps and tape.

 

bp9fqPs.jpg

  • Like 1
Link to comment
Share on other sites

Thanks for the updated pics, Jennifer, and really nice job on that armor!  Unfortunately, we need one small fix before moving ahead.  The actual tips themselves are fine, but the mesh (weave) in your hovi-tip screens is too tight, and as per the CRL for level 2, it must be a wider weave. Correct 'Hovi mic' aerator tips There are a few places to get this, and if you need some sources just PM me.  Thanks!
 
l6Tqxna.jpg?1&key=a893a43bddfd111f1e304cc3b0ac403a0abd1750d3a7aded8a7ed27a9706d25e    jgJzznk.jpg?2&key=159f214bd3a2dea1993f798026f20ba6a34633c205e87b8caca9359a35faebb9  cotC39C.jpg?1&key=4eb3729d40caeea2d5e59a1992c518713e19a8f561363e616b502ddb3955ab2a
 



Just ordered a set from ukswrath

Thanks!


Sent from my iPhone using Tapatalk
  • Like 3
Link to comment
Share on other sites

On 2/15/2019 at 5:37 PM, jeneyre said:

 

 


Just ordered a set from ukswrath emoji16.png

Thanks!


Sent from my iPhone using Tapatalk

 

 

I put Tony’s mesh in mine too. It was a little challenging to get them in, but they will look awesome when you are done. 

  • Like 1
Link to comment
Share on other sites

On 2/15/2019 at 5:50 PM, justjoseph63 said:

Thanks for the updated pics, Jennifer, and really nice job on that armor!  Unfortunately, we need one small fix before moving ahead.  The actual tips themselves are fine, but the mesh (weave) in your hovi-tip screens is too tight, and as per the CRL for level 2, it must be a wider weave. Correct 'Hovi mic' aerator tips There are a few places to get this, and if you need some sources just PM me.  Thanks!

 

l6Tqxna.jpg?1    jgJzznk.jpg?2  cotC39C.jpg?1

 

 

Just installed the new mesh! Thanks to Ukswrath for sending them out so quickly!

 

2019022013130084-2893983533320209594_IMG

 

2019022013130084--3708755486964144573_IM

 

2019022013130084-7676084892419095466_IMG

 

  • Like 3
Link to comment
Share on other sites

  • CableGuy changed the title to TK-50721 requesting ANH Stunt TK EIB status [WTF] (Under Review)

Hi Jennifer, and welcome to your Expert Infantry review. 

 

 

CRL and EIB Application Requirements:

Thank you for adding the additional photos requested. All required photos are now in and, after review, we are pleased to welcome you to Expert Infantry rank. On behalf of the DO team and myself, many congratulations! :duim: 

 

 

Other-Armor Fit/Assembly;

In this area we review observations made by your fellow troopers and the DO team. Some observations may lead to suggestions to improve the overall look of your armour. 

 

Starting from the top and working our way down, overall your lid looks fantastic. Thank you for swapping out those Hovi-Tips.

 

Whilst there are quite a few variations of the frown paint in ANH, many had the paint extending beyond the un-drilled 5th hole. This is very common across the trooping community and can add that extra touch of detail. This could be a consideration. 

 

MCM5OT6.jpg?1

 

 

Frown references;

cknKhkl.jpg

 

 

Looking from the front, I can't help but notice that your face appears to be visible through the frown holes. Whilst this is not a requirement at any level, and was not part of the original screen used armour, you could consider affixing some black mesh behind the frown to help cover your face from the punters. This will help increase the illusion that they are meeting an actual Stormtrooper (especially the children). 

 

Also, if there is any wiggle room with your shoulder bells, you could try bringing them a little closer to the chest armour. It looks like you possibly have some extra return edge on the lower area of the bells which could be trimmed back a bot to help reduce the gap. 

 

jN0srj8.jpg

 

Shoulder reference;

loLT0sM.jpg?1

 

 

The upgraded mesh on your Hovi tips is much better. Going that extra mile, we might just suggest slightly weathering the front edges (note the white edges on the screen used on the majority of stunt helmets).

 

zhwOu3o.jpg

 

 

Whilst the forearm to hand guard gap is not that visible from the front, it does appear to be a little out from the rear. As below, you could consider adjusting your strapping to bring that right forearm more in line with the left, evening out the wrist to hand guard gap at the same time. 


eiHAnMc.jpg

 

 

We can also see that your gloves seem to be very shiny. The original gloves appeared to be more matt in appearance, so this could be a potential upgrade down the line for something a little more accurate. 

 

dD8CcFK.jpg

 

Moving down to the ab plates, the painted buttons look great. For a slightly more screen accurate look, you could consider trimming down the smaller button plate a little, and also paint the chest fixing screws white. 


qdThurO.jpg

 

 

Ab button reference;

 

SKNsQQe.jpg

 

 

I've highlighted your holster to belt attachment purely as the right hand one, shown here, looks a little loose. If possible, this could be tightened/shortened to bring it closer to the canvas belt. 

 

c9iV7lT.jpg

 

 

On to the thermal detonator, the screw positioning could be closer to the edge of the clips, as shown below. This won't affect application at any level, just something that could be considered for that extra level of detail.

 

X0hFgwn.jpg

 

 

A simple dressing issue on the calves, by the looks of it. We would suggest a final check on these when kitting up to get that alignment nice and even. 


RMPGDT8.jpg

 

 

Whilst there are examples of a few thigh ammo packs "hanging low", your looks a little lower than would be ideal. Ideally, it would be best not to see black between the ammo pack and the thigh armour so we would suggest moving this up by at least 1cm or so. 


LEjL2b0.jpg

 

 

Sniper knees can be a real pain to fit, however, you appear to have fitted yours really well. All we'd suggest here is to adjust the profile a little to match the screen used examples. (thanks to Glen for the excellent reference image). 


ASGZyur.jpg

 

Sniper knee examples;

 

BpZlcs8.jpg

 

 

Moving our attention to your blaster, as with many rubber blasters, the weathering is a little on the heavy side. Also, the makers appear to have inserted the magazine a long way into the magazine housing. As this is probably glued in, it might not be adjustable; however, we couldn't go without mentioning it. 

 

On the weathering front, certain areas like the grip and the rear half of the Hengstler counter were made of plastic on the original screen used blasters - as such, they would not have the silver/metalic weathering effect which appears to be present in these photos. You could consider toning down the silver a little with black paint, although colour matching might be tricky (on rubber). 

 

Y5Yf1J9.jpg

 

 

The bronze effect on the scope is also very strong. We would suggest adjusting this for a more screen accurate appearance. 


h70oFmS.jpg

 

 

Blaster example;

 

FwvuD1J.jpg?1

 

 

Centurion Suggestions;

In this section we prepare you for Centurion. Because Centurion photos show more detail than EIB, items pertaining to Centurion might be seen there and not here. We try to point out all that we can from what we see but the final accuracy is the responsibility of the trooper. 

 

From the pictures provided so far, we only really have one thing to highlight which would be the lower ear screw positioning. As it stands, they are quite a bit higher up the ear than screen used examples. Your's is a fantastic build and it looks like you've had Centurion quality in mind from the off, so this little change would be the icing on the cake.  

 

83GTcCR.jpg

 

nKLlTaG.jpg

 

 

Reference;

uWOLrpm.jpg

 

 

Many congratulations again, Jennifer. We hope to see you applying for Centurion in the not to distant future... :salute:

 

  • Like 1
Link to comment
Share on other sites

  • CableGuy changed the title to TK-50721 requesting ANH Stunt TK EIB status [WTF] (894)

Congratulations and welcome to the EI ranks trooper, looking forward to seeing your Centurion application, good luck

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...