Digz Graavz[TK] Posted February 14, 2019 Author Report Share Posted February 14, 2019 Progress update: I've made a proper thigh support system (traditional belt and elastic setup). I also put some small foam strips on the sides of the thighs to help keep them in place. I have glued the straps for the drop-boxes into proper position. I have marked the belt for shortening. A friend is re-sewing the end for me on Friday. I have properly secured the mouth grate with Sugru (was just taped in). I have mounted my ICOMM and Voicebooseter in the chest plate. I've figured out the wire-routing for my helmet fan and made a mounting bracket for it. I also ordered a new set of gloves and flexi handguards. The first set the glue didn't take well on one hand and the other it took TOO well. I've done some trimming on them and they're Okayish but I am not thrilled. 2 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 14, 2019 Report Share Posted February 14, 2019 Nice updates, with the gloves and handguards I've found that different makers need different glue to adhere to them, some I've used E6000, some superglue and others silicon/silastic, so you may need to do a test area and see how you go. 1 Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 14, 2019 Author Report Share Posted February 14, 2019 I used the 2 part superglue with the activator. I think I'll play more before making the new pair and see what works best. 1 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 14, 2019 Report Share Posted February 14, 2019 1 hour ago, Digz Graavz said: I used the 2 part superglue with the activator. I think I'll play more before making the new pair and see what works best. To attach the guards to the gloves? I used super glue to attach both my first set of handguards, one set to rubber, the other to Nomex. After time, (5-6 months) the glue became very brittle on both sets and started peeling away on the edges to the point where I had to remove them. Was the set you had a problem with one of mine? I haven't heard of this happening with the them before, but if they were just PM me and I will get you sorted out. Quote Link to comment Share on other sites More sharing options...
A.J. Hamler[TK] Posted February 15, 2019 Report Share Posted February 15, 2019 If I recall, Joseph, you recommend E6000 for yours. right? I only ask because I'm about to do mine now. Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted February 15, 2019 Report Share Posted February 15, 2019 8 hours ago, A.J. Hamler said: If I recall, Joseph, you recommend E6000 for yours. right? I only ask because I'm about to do mine now. Absolutely. Be SURE to add a substantial amount of weight on top while they dry (at least 12 hours), similar to using clamps/magnets when attaching armor pieces together. Quote Link to comment Share on other sites More sharing options...
MakeNoiseMan[TK] Posted February 15, 2019 Report Share Posted February 15, 2019 Here's what I used for the AP rubber gloves and flexible handguards that Mark sent:https://www.amazon.ca/Loctite-Plastics-Bonding-Activator-681925/dp/B000Y3LHXW/ref=sr_1_1?ie=UTF8&qid=1550245899&sr=8-1&keywords=loctite+plastics+bonding+system Amazon was the only place I could find it in Canada. It was recommended by many and seems to be doing its job well. :-D 1 Quote Link to comment Share on other sites More sharing options...
wook1138[TK] Posted February 15, 2019 Report Share Posted February 15, 2019 1 hour ago, MakeNoiseMan said: Here's what I used for the AP rubber gloves and flexible handguards that Mark sent:https://www.amazon.ca/Loctite-Plastics-Bonding-Activator-681925/dp/B000Y3LHXW/ref=sr_1_1?ie=UTF8&qid=1550245899&sr=8-1&keywords=loctite+plastics+bonding+system Amazon was the only place I could find it in Canada. It was recommended by many and seems to be doing its job well. :-D LePage has a similar product which can be found at most hardware stores. CrappyTire has it. 1 Quote Link to comment Share on other sites More sharing options...
Twosolitudes[TK] Posted February 15, 2019 Report Share Posted February 15, 2019 1 hour ago, wook1138 said: CrappyTire has it. I bought my Lepage version at Canadian Tire; they also have the pan-head screws and E6000 (made in USA). 1 Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 15, 2019 Author Report Share Posted February 15, 2019 Yeah I used the Lepage 2 part (boughtat RONA as I work there. Rob's a CT guy) Gloves were from Mark at AP. It's totally my fault the mess up on them. They're passable for now but I want perfection I will play with scraps and see what I can get to work. If E6000 will then I want to go that route. Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 18, 2019 Author Report Share Posted February 18, 2019 As per advice, I trimmed the back cover strips on my shins so that they end before the mouldings: I've also ordered a couple of Rubies blasters that I will mod and paint up to have as kid-resistant props. My good blaster is too nice to hand out. 2 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 18, 2019 Report Share Posted February 18, 2019 Looks much better. Having some "youngling friendly" blasters on hand is a good idea, I remember handing mine over to a youngling early on in my trooping days to find it was returned with the front sight missing, luckily a wrangler had noticed the piece hit the floor and save it 1 Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 19, 2019 Author Report Share Posted February 19, 2019 I found some on Etsy with the worst paint jobs ever and selling for stupid money. I'll see how mine go and maybe start a side business... 2 Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 19, 2019 Author Report Share Posted February 19, 2019 Trying a 1 day build on a Rubies. It's not going to be super detailed but I've made some mods. Here's my thread: 2 Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 25, 2019 Author Report Share Posted February 25, 2019 (edited) I just posted a ton of pics in my pre-approval request. I was emailed by my GML who said it should all be a go but he wants some clearer pictures. I'll have to take the actual shots of me wearing it tonight, In the meantime, I whipped up a mannequin out of ABS pipe in about 30 mins: (the left hand slipped...need to make it better next time I put the armor on him!) Material List: 3" ABS pipe - 12' 2"'ABS pipe - 6' 3" ABS "short" elbow - 2 3" ABS T - 3 3"-2" Reducing Flange - 2 2" 45 degree elbow - 2 Zip Ties to connect torso to shoulders Cut List: 3" Pipe: 4" x 2 (shoulders) 5" x 1 (waist) 17" x 2 (torso) 33" x 2 (legs) 10" x 1 (neck) 2" pipe: 8" x 2 14" x2 Edited February 25, 2019 by Digz Graavz 3 Quote Link to comment Share on other sites More sharing options...
MakeNoiseMan[TK] Posted February 25, 2019 Report Share Posted February 25, 2019 Beautifully done on that mannequin!! Looks great and I bet it was cost efficient. :-D Glad to hear you got a message back from the GML - almost there!! Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 25, 2019 Author Report Share Posted February 25, 2019 Even cheaper because I work at Rona lol. 2 Quote Link to comment Share on other sites More sharing options...
gmrhodes13[Staff] Posted February 25, 2019 Report Share Posted February 25, 2019 Normally it's just so the GML can check some details, a lot of people take images on phones and they can auto save for a lower resolution, it's very hard to enlarge those to see fine detail Nice work on the mannequin, I also made a pipe build frame, managed to find some of these adjusters which work great when putting the armor on and off. 1 Quote Link to comment Share on other sites More sharing options...
Digz Graavz[TK] Posted February 27, 2019 Author Report Share Posted February 27, 2019 Approval email received! Just need to wait for the election dust to settle and I'll have my TKID! 5 Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted February 27, 2019 Report Share Posted February 27, 2019 hahaha Awesome Chris congratulations!!!!! 2 Quote Link to comment Share on other sites More sharing options...
Twosolitudes[TK] Posted February 27, 2019 Report Share Posted February 27, 2019 Nice! Welcome to the ranks trooper! 1 Quote Link to comment Share on other sites More sharing options...
HSM76[TK] Posted February 27, 2019 Report Share Posted February 27, 2019 Great to hear that, congratulations!Gesendet von meinem ONEPLUS A6013 mit Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
wook1138[TK] Posted February 27, 2019 Report Share Posted February 27, 2019 Congratulations!! 1 Quote Link to comment Share on other sites More sharing options...
MakeNoiseMan[TK] Posted February 27, 2019 Report Share Posted February 27, 2019 Woohooo!! Congrats!! Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
lucnak[TK] Posted February 27, 2019 Report Share Posted February 27, 2019 Congrats! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.