Jump to content

Aunion's first scratchbuild try ( WIP )


Recommended Posts

Fourth try writing the same, I hope this time it works flawlessly. If not, I'll post without ( by now the damnit )Tapatalk....

 

Cursing mode OFF.

 

I seriously doubt if writing the long post version or the short one, I've make both in the last three hours...

Second scratchbuild try, first a Sandtrooper helmet (waiting for answers for where to post about it) and now working in a E11 ANH blaster.

Very very low budget (you can say none for this build), very slow work/updates (mainly after work time) but high times working on it with my limited modelling/painting skills.

I'm really trying to not purchase any part of this build, at least not anything previously built/ cast/ 3D

 

All of you will know about the materials used in this build, 40 mm OD PVC pipe / tube, plasticard/polystyrene (Evergreen), plywood, aluminum and several other "ghetto resources" that I'll try to show you very soon.

 

I'm really scared about pictures, I won't like to lost my pics and words again. First picture, fuxxxng Tapatalk suddenly stops and started cursing in languages I don't even speak...

 

I think I'll post this, and I'd try to upload pics later. Siesta time's coming, near 40°C just now here in Spain...

 

Thanks.

 

Sent from my SM-T365 using Tapatalk

 

 

  • Like 2
Link to comment
Share on other sites

Open to thoughts and comments. Please note there's almost nothing glued/fixed in place yet, everything is dry mounted to show how it looks.
Be patient with me, totally new to Tapatalk, don't know how to add comments between pics.
Hope you like it.
TIA.6c6c5d7e6369408467b1b803c8d716aa.jpg24fcddf76dda1991f23f7ee9aad7cdb2.jpg775a9a5f92ab8a0325ebd741d8059cb2.jpgd05aac5e787a1e98564647f1cb0ac068.jpg7f360fa5f4e3da24eb04051b4af24395.jpg5377670eeb1de0266c2e1d9e452e0356.jpg62a2ebcf4b88158a173dc3e79f892d73.jpg7a3482fb9279200ca8c348022f430146.jpgb8d310240c5e70a7610463ff55a37c97.jpg

Enviado desde mi SM-T365 mediante Tapatalk

  • Like 3
Link to comment
Share on other sites

Thanks Dracotrooper! It's been a long time since I didn't feel that OCD thinking, lately it's aggravating. My summer holidays start soon, really don't know if I'll be able to dedicate full time work days on it, you builders know what I mean... I'd have to take with me tools, materials and all stuff, besides a pair of RC cars (more stuff), fishing rods (even more stuff) and I almost forgot several suitcases. I know for sure that if I don't take some stuff with me I'll be missing it, though sometimes you carry stuff that you even don't touch at all. Well see...

Enviado desde mi SM-G360F mediante Tapatalk

  • Like 1
Link to comment
Share on other sites

Thano you Cableguy. It seems curious, I've read your build and the one from Dracotrooper ( amongst many many others ) several times for reference.

Enviado desde mi SM-G360F mediante Tapatalk

  • Like 1
Link to comment
Share on other sites

Is it usual that Tapatalk works a bit funny? Sorry for the double posting. 

Enviado desde mi SM-G360F mediante Tapatalk

 

 

 

What I do to avoid double posting using Tapatalk, is to close the application after every new post. This refreshes it for new content. Good idea to make sure you have a strong connection to the internet as well. 

For editing posts, like adding pictures and more text, I do the following:

 

Click on the post ID, click the edit icon, click the 'edit' word on the middle of the screen. Here, you can add more pictures like you normally do with the button below. As for adding text, make sure you add it between the lines of code as shown.

 

Simply click on the airplane to update. You see the revision right away, if not, restart tapatalk.

 

Hope this works for you!63009ffec2f95ec06c13823fb447a473.jpg

 

Sent from my SM-G390W using Tapatalk

 

 

 

 

 

  • Like 2
Link to comment
Share on other sites

OMG! Listen to me, people...
Here in the FISD you'll get all kind of help from friendly people, not only refering to armor or weapons of choice, but also to get used to forums apps.
Troopers helping troopers, isn't it?
Thanks a lot Dracotrooper, just finished work and there's a lot of stuff at home waiting to become kind of E11 blaster.

Enviado desde mi SM-T365 mediante Tapatalk

  • Like 2
Link to comment
Share on other sites

Half an hour writing gone away!

I'll have to practise more editing posts. Let's try again. 

 

32 mm OD PVC for the bolt, 0.2 mm plasticard for the cleaning strips. 9375a5240efd94e1398fcdbe28346c23.jpg

 

An overall picture, fake spring made from soldering wire ( tin, for soldering copper or brass) and the first steps creating and fixing the coking handle. I really don't know the name in English, it's a 6mm attachment/fitting for brick or concrete walls. Here we call it "taco", the same as Mexican food. "Taco de 6, de 8..." isn't the same as "taco de pollo,verdura". The later chicken, vegetables.

7c0a746d56460f75a9e6f30a1f943bfa.jpg

 

Finally I think I got it, hope you like it.

  • Like 3
Link to comment
Share on other sites

It's really nice to hear that from someone who has set the bar in his builds soooo high...Thanks T-Jay.
All answers are really encouraging to me, guys. You know what I mean.
Gotta start work now, just finishing meal time!

Enviado desde mi SM-G360F mediante Tapatalk

Link to comment
Share on other sites

The last worktime has been a mix of fails and success. Every time I start working I always think that I have to strictly plan my build, from inside to outside, from top to bottom or front to back...

But seems virtually impossible. Lack of materials, laziness or any recent read of some of the awesome builds here in FISD makes me keep on with my chaos in order, or maybe order in chaos. Not talking about the outgrowing OCD, as a modeller/ hobbyist I DO really like detail, and maaaaany of your builds aggravate my mental illness (LOL)

I wanted to add detail to the front sight, mainly the setting hex screw. Started drilling manually, finished badly.

68e1dc2f9f5af5de0e30b5caf3534509.jpg

 

New try, don't give up. Use the broken one as a template (laziness, I have the templates on my tablet, but I was listening to music, The Cult, didn't want to pause it )

 

 

 

9be9784b7f89e2cfc2e9067550e89534.jpg42d2c3ba0179f15db1e74873a99c41ca.jpg

 

Uncountable fails later, I gave up. But, I opened a beer and the fails seemed a little less discouraging. This piece is made from a 5mm square wood stick, a sugar cotton one, don't know if it's correct saying that way. Very soft (good to sand/file, bad to drill)

437743f8ef750c0a7c0665d3c33bfbe2.jpg

 

You can see in the pics what I told you about my crazy way of working. I always spread stuff over the table, but I don't tidy up until the end.

Having failed in detailing the front sight, and before cursing again, I started one of the parts that I feared the more: rear end cap. I've used a 40 mm ID "cap", that's how it's called here, like a female lid, sorry if doesn't make sense.

Drilling, tapping with M6 tap, use the M6 hex screw from the muzzle or grip and a M6 nut.

What's that for?

09b81b5cdf7e1c10ce6ec716918f8586.jpg831014a5e98f101e3fd0cf83881907eb.jpg155b8c90efe96641f717316c795c4643.jpg3ee0ccc81a0532554edd731c9dc9e1af.jpg

 

You can see I didn't lie with the beer...

I want to introduce all Imperial troops my fancy guetto mill...dfa94fb68d2ff7284ef98e92bd7d24b9.jpg93d496d745dcd02bb478b128ad98b197.jpgdcbfa237bfcb3d0f13e1cbbe091d9cd1.jpg

 

Sandpaper, file, knife and lot of turns ( and heat, be careful with your hands ) and I got this

 

 

db4bb6d4eb63558460198a98363e2716.jpgd49bc3ab356f4f736ed818b2d3cbb979.jpg0ac64e6f898e8f0d369872bf64f150c5.jpg

 

Im really happy with the results, easy, fast but...lots of PVC shavings all around, not really clean, but it's really worth it. Two minutes of sweeping for a rear cap!!!

Waiting for your thoughts and comments.

Cheers.

 

 

  • Like 3
Link to comment
Share on other sites

  • 2 weeks later...

Hello guys!

Some updates to come ASAP, only limited access to the internet these days, I hope to share with you all soon. I'll tell you as far as I can recall them: handmade recoil spring, bolt and cocking handle fitting, barrel fitting, grip fittings and receiver modifications, D-ring and its housing... I'd like to upload some pics but it's really impossible at the moment. Hope you'll understand. 

Cheers from Spain. 

  • Like 1
Link to comment
Share on other sites

Some pics as promised. First the handmade recoil spring. cd1eae76870a145b9115fe4102e88b9e.jpg&key=de1e7c0087c39aa87335397fdad4f57971d1d252c9cffe6270eeab96639b1125b9e6b65f653d75b977e40bbfe91f0a42.jpg&key=258bbe90e0d68ba6f6ad2e335ecc18ac87f2bf8d098589a5489969ea0c09379d

I didn't think it could be so hard to turn a steel wire into a spring. First the work in itself, and second to find the right diameter to wrap it around. Please note that the spring grows in diameter when you think you've finished it. Third time was finally good, sore fingers and sweating included. I don't have a better pic of the spring alone.

You can see the receiver and grip modifications after reducing the grip width. I glued a strip from aluminium between the grip and the pipe, the previous holes didn't were in the correct place and the several tries to screw the grip firmly enlarged them a lot, so new holes and happy with the results. You'll also note the terracotta Milliput to cover the old cut for the wide/old grip.

 

Enviado desde mi SM-G360F mediante Tapatalk

 

 

 

 

 

8a589f0cbb605fd7c580f84f9ce9559d.jpg&key=e989c99c7c37d9b1fc2f8b44beae4414f069ef1ade460b94339e984e3e253099

 

Here you see one of the screws that fixes the grip. Had to drill the receiver to screw them properly, didn't want a wobbly grip. I'll cover them later. I used conical head screws to make them flush in order to not stop the block when sliding (yes, it does!!!)

 

0ed5b5d0a1d81ef759056a8b604e4f37.jpg&key=de3a692db6a093db00e54b3a5323371e1b055813ef303f600587ade540f43997

 

I'm trying to achieve maximum resistance in this build, and it's been a hard time to find a way to fix the cocking bolt. M3 conical hex screw and a square nut that I found inside an electrical switch. Cut to get the nut flush, screw and done... Well, when I came back to my parents-in-law holidays house ( you'll have noted the yard and the trunk as a workbench, LOL) I'll try to take pictures of the proceed to fix it correctly, note that you don't have access to work from outside.

 

 

00a78d22ffc7133122dee49d10c0b77c.jpg&key=cd31e2e28e909d4c5e69482ca9ab3ea0aada68fb495478976f686e03a93f04f25ebef37a997106e41d752d34ea1c9003.jpg&key=d4c3c4f314c143c56a43657ea6f10532c0bfc3ff02ed78007086b8a3e7225d489afc694c14178da42f8ea5fecd9ac708.jpg&key=33a01947fb10a9c9b454158f27e74ea59a1a31e64cb1483637013e0cb0943332

 

Time for the barrel fittings/fixings, don't forget your caliper to measure every pipe/tube you see in the yard/garage/caveman. I can't remember the correct dimensions of every pipe used, I'll try to post them in a few days.

Main barrel is a copper pipe, 12mm OD. I saw it slim through the vent holes, a quick reference to read that the main barrel is about 15/16 mm OD. Solution? 15 mm OD copper pipe in the outside, it slides perfectly and if it rattles too much I can solder them easily. The fittings inside the receiver are also pipes, the black one is for garden watering, the green one is used in buildings for hot/cold water. Hope it make sense...It such a tight fit that holds the barrel perfectly without gluing it, though it's fixed to the receiver with a screw.

Did I talk about soldering? Next to come...

 

cc59aed04dbb58efcd0c3082d016df0e.jpg&key=8785648677a68f44f3208f50895d016afbfebccb92cb6a3f9cb53b00d14ac1cd3b3c4cad9b6a93d2395f21146db2b039.jpg&key=d35fd566ead5d8a0d0ac7f17c012d67bcf0a6666f52f4ea43ef99af134740610

 

One of the most feared pieces ( as I've read many times ) besides the end cap is the folding stock. Here you see the piece that fixes the stock to the receiver. Made from 15/12 mm copper pipe, soldered. Difficult task, when I had finished soldering one side and started the other one, it started to desolder, moved, dropped and start solder again.

86a65bae3e9f2f3f8f80595662f91221.jpg&key=795e7a2cd7d3706045aceb69c8135c0ab776c7fd58fa1c9f1c8feeae7f9f1c1fa40ccbf8b2a4eb633dbd96f4f79c5f33.jpg&key=1717174bea773a58b60bdc9274eafa813ff9b9694ccfa539c8557096124840eb

 

D-ring and fitting. You'll notice it's a chain link, it's the nearest in dimensions that I found. My fingers soared after making three springs, and I didn't want to look for something that made me work more. Near enough is good enough, isn't it?

Didn't take pictures of my last wooden fail, very bad luck lately drilling wood. More wood to start the next barbeque...

I had to make it in plasticard after five or six tries in wood.

 

 

20165480093d0d43e10359816f34345b.jpg&key=cb2c6c1f0194d3c2a0c68e2eb4d9bf1eceb8826554850446968c7f50215e811b

 

Rear sight and rivets glued. Didn't glued the 200/100 piece yet because I don't really like the rivets look, don't know if I'll let them that way.

 

400801a7ec5c8b59ef93d3078ed374a3.jpg&key=6cff241dde0ec998d10c707c0f01c94eb4f489cb8885777e7f1ed2a4eb64a277cce136e3e84cf2339a18a15b8f19cce5.jpg&key=2982b56117a1164f6573e4d324880dbe83d1c45e036babb7b49e868f1b0b813f

Lastly a pair of pics, one of the magazine well, and the other of a general view of my build. I think it starts to seem a Sterling, what do you think, guys?

Cheers from a sunny beach in Spain.

P.S. With free wireless internet access, LOL!

 

 

 

  • Like 3
Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...