Jump to content
Mupfel

Mupfel’s E11 Blaster Build (with Doopydoo’s Resin Kit + T-Jays Completion Kit + 3D Print Additions + Arduino Electronics)

Recommended Posts

Thanks guys...

At the moment i am working on the spring and how to get all the cables through although the spring is moving...


Gesendet von iPhone mit Tapatalk

Share this post


Link to post
Share on other sites
Thanks guys...

At the moment i am working on the spring and how to get all the cables through although the spring is moving...


Gesendet von iPhone mit Tapatalk
I recall one builder, fairly recent, describing he would attempt to manage electronics with a functioning spring by inserting a hollow tube inside the spring and having the electronics sit inside the tube. Such that when the spring is engaged, the tube and electronics inside remain stationary.

There must be a series of related considerations that need to be taken into account to make this work this way ... ponder and execute with baby steps and caution.

Happy researching and wishing you wise approaches on this challenge.

Sent from my SM-G390W using Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

Thanks for the input !

Believe it or not, at the moment i am testing with a tube already :-)...


Gesendet von iPhone mit Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

Got some progress today... started the cylinders and prepared the USB docking to hold the spring...

 

To avoid that the spring pushes the USB docking out of the riffle, i placed screws at the end of the blaster...

 

W2ChL7Q.jpg

K9CuaI1.jpg

 

 

 

Two question to you guys...

 

Can somebody please tell me or post a picture where the screws of the cylinders are visible? I searched plenty of threads but the important pictures are always dark at that particular area. The front of the cylinder screws I have already done as you can see... i am talking about the back screws.
 

The same for the area below of the back cylinder screws. In Tinos kit i can find this red insulation piece. Where exactly do i need to put it?

 

pCwkwYb.jpg
4LClDwK.jpg
NpjKLvZ.jpg
 

 

 

Thanks a lot in advance!

 

As always, thanks for reading and commenting.

Edited by Mupfel

Share this post


Link to post
Share on other sites
3 hours ago, Mupfel said:

Two question to you guys...

 

Can somebody please tell me or post a picture where the screws of the cylinders are visible? I searched plenty of threads but the important pictures are always dark at that particular area. The front of the cylinder screws I have already done as you can see... i am talking about the back screws.
 

The same for the area below of the back cylinder screws. In Tinos kit i can find this red insulation piece. Where exactly do i need to put it?

 

pCwkwYb.jpg
4LClDwK.jpg
NpjKLvZ.jpg
 

 

 

Thanks a lot in advance!

 

As always, thanks for reading and commenting.

Hi Marko,

 

did you already check this power cylinders thread?

E11 power cylinders research thread

 

Or Tino's Lucky#Eleven thread?

Lucky#11 update 22 - the power cylinders

 

Best regards, 

Patrick

  • Like 2

Share this post


Link to post
Share on other sites

Hi Marko,

 

yes please see the post Patrick has posted for Tino’s lucky eleven power cylinders. The bolts and nuts are set up the same as on the front of the cylinders. 

Edited by Bulldog44
  • Like 2

Share this post


Link to post
Share on other sites

Thanks a lot guys, i obviously did not read the cylinder thread carefully enough... i found it :-)


Gesendet von iPhone mit Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

Next step on the agenda was the spring and the USB port. Unfortunately, as you can see on the picture below, the diameter of the USB port is to thick, so the spring cannot be placed to the end of the blaster, it would touch the USB port in a position were it is visible.

 

eleSTP0.jpg?2

 

I decided to sand it down until the spring gets over the ports...

 

c3bhGW8.jpg

nvBDctK.jpg?2

mBIaFvN.jpg?2

fodQjeN.jpg?2

What do you guys think, are the dimensions of the spring and the other components ok?

 

Thanks for commenting and reading.

 

Edited by Mupfel

Share this post


Link to post
Share on other sites
Next step on the agenda was the spring and the USB port. Unfortunately, as you can see on the picture below, the diameter of the USB port is to thick, so the spring cannot be placed to the end of the blaster, it would touch the USB port in a position were it is visible.
 
eleSTP0.jpg?2&key=11797ceea68239a70b33c150ce7faf1bb29cb03fe5b3c46d870a82dd5938ec89
 
I decided to sand it down until the spring gets over the ports...
 
c3bhGW8.jpg&key=5ef9d41457b7a96985abe48c7e956ed576cf0c6808c8fa16eef86eb7abacb898
nvBDctK.jpg?2&key=d7e5d6708b459a6ab47b7c331520fd57c6295afd0aaae50e0b31f7322c03791a
mBIaFvN.jpg?2&key=c03de9870587699b279174f943f173e7e2a3a4c0aabeb95322d09df490b8bbdb
fodQjeN.jpg?2&key=78a8074cdf92b86ed1f8ed9581ec1ad0cc76b3121fb9948e17cdb0020adfe55e
What do you guys think, are the dimensions of the spring and the other components ok?
 
Thanks for commenting and reading.
 
Nice!! The back end of that piece is made to fit and now...perhaps later give it a flat black paint job so it's well hidden?

Sent from my SM-G390W using Tapatalk

Share this post


Link to post
Share on other sites

Yes, painting it black is the plan until now :-)


Gesendet von iPhone mit Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites

Great idea and good solution. :duim:

16 hours ago, Mupfel said:

(...)   What do you guys think, are the dimensions of the spring and the other components ok?   (...)

Would suggest to check some reference photos. The amount of visible coils seems a lot to me, maybe you can stretch the spring and then shorten it to compensate this.

Share this post


Link to post
Share on other sites

Everything is shaping up nicely. 

Share this post


Link to post
Share on other sites

 

Hi folks,

 

thanks for the appreciation and the help, I am getting from you guys!

 

Some time went by and i was able to go on working with some things on the blaster.

The power cylinders were the last part i was working at.

 

The cylinders got its wires at the front now... in addition to that i finished the screws at the cylinders directly as well.
8rUjbSSg.jpg

 

 

 

As i did not find the correct size of resistors for the braided wire sleeving, i decided to get a wooden piece and sand it down to the needed size.

we6uI2b.jpg

KnlsMYz.jpg

 

 

Here we are, the finished product :-)... thanks again to Tino who reacted very quickly on sending another insulation to me, really appreciate that!

 

6CTqpKA.jpg

 

 

 

In addition to that i worked on attaching the end cab clip to the blaster. Still, my goal, to have every part attached in a removable way, is valid.

The cab clip is attached with two screws. I counterbored them, to not having problems with the function of the clip itself.

wNSDqGF.jpg

hE6JcJI.jpg

 

 

Another part has been started, the metal folding stock. I removed the old riffle part from in between of the folding stock. Next step will be, adding it to the blaste itself.

8hQlkH0.jpg

 

 

One question at the end, does anybody know, if anyone of the 3D printing experts are offering the front sight for buying? Mine is broken and although i fixed it with metal pins, it is very instable.

vAp8u5r.jpg

 

 

Thanks for your help and time!

 

Marko

Edited by Mupfel
  • Like 1

Share this post


Link to post
Share on other sites

Hi Marko, the power cylinders look great and that was a crazy cool idea to build the resistors from wood. :duim:

 

Not sure about 3D printed front sight guards, but @fieldmarshalloffers his aluminum version and you could also contact Derrek (@Dday) to ask for a resin version.

  • Like 2

Share this post


Link to post
Share on other sites

Good progress on the power cylinders! :jc_doublethumbup:

That metal folding stock looks great but I already spent so much time on the resin one that I think I’ll stick with that.

I hope that one of Tino’s suggestions will solve your front sight guard problem.

Share this post


Link to post
Share on other sites

Thanks guys, yes, just right after i postet this post yesterday, i saw Fieldmarshalls‘ post :-)

I think i will go for that one
:-)


Gesendet von iPhone mit Tapatalk

  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, Mupfel said:

Thanks guys, yes, just right after i postet this post yesterday, i saw Fieldmarshalls‘ post :-)

I think i will go for that one
:-)


Gesendet von iPhone mit Tapatalk

Love your build!    i do have all the parts in alum if you get stuck on the tougher parts just check out my sites ...  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×