Mupfel Posted August 6, 2019 Author Report Share Posted August 6, 2019 Hi Dennis,I used a flat black for all parts, even for the handle, as i do not like the glossy appearing :-).Thanks for the comments, hopefully today i will be able to go on.Gesendet von iPhone mit Tapatalk Quote Link to comment Share on other sites More sharing options...
Mupfel Posted August 6, 2019 Author Report Share Posted August 6, 2019 Today i spent some more time in assembling the blaster and some minor details, like adding more realistic letters on the scope with a wax crayon... on the back of the barrel you can see my TK ID , 24717, hammered into the resin with hammering letters, sorry for the wording, but i cannot find the correct translation. The number 4 i have to do again, as the wax is not remaining inside. Now it looks more and more like a blaster and i am getting happier and happier when i see the result :-) :-) :-) A detailed pictore of the charging and programming port... in the end cap clip you can see the speaker, which had to be replaced twice already... meanwhile i know the reason why it blew up twice :-) Here you can see the main switch, placed in between two magnets of the completion kit from Tino. Only if this switch is switched on, the blaster can be activated. More pictures are following once everything has been checked and if it is working properly. Have a anice evening guys! 4 Quote Link to comment Share on other sites More sharing options...
T-Jay[TK] Posted August 6, 2019 Report Share Posted August 6, 2019 Once finished, you need to do a little video clip to show it in action. 1 Quote Link to comment Share on other sites More sharing options...
Mupfel Posted August 7, 2019 Author Report Share Posted August 7, 2019 Sure thing :-), will do. Gesendet von iPhone mit Tapatalk Quote Link to comment Share on other sites More sharing options...
Aradun[TK] Posted August 11, 2019 Report Share Posted August 11, 2019 On 8/6/2019 at 2:45 AM, Mupfel said: Hi Dennis, I used a flat black for all parts, even for the handle, as i do not like the glossy appearing :-). Thanks for the comments, hopefully today i will be able to go on. Gesendet von iPhone mit Tapatalk Thanks Marko and thanks T-Jay for the link. Quote Link to comment Share on other sites More sharing options...
Mupfel Posted August 19, 2019 Author Report Share Posted August 19, 2019 (edited) This evening i spent about 45 minutes to cover all the parts that should not be painted silver... the paintjob itself took about 5 minutes in total... Tomorrow i will reveal the finish... Have a great evening guys...! Edited August 19, 2019 by Mupfel 3 Quote Link to comment Share on other sites More sharing options...
Bulldog44[TK] Posted August 20, 2019 Report Share Posted August 20, 2019 Looking forward to seeing the results! Great build thread and great effort put into this blaster. Quote Link to comment Share on other sites More sharing options...
Sly11[Admin] Posted August 20, 2019 Report Share Posted August 20, 2019 Tremendous work !! Quote Link to comment Share on other sites More sharing options...
Mupfel Posted August 20, 2019 Author Report Share Posted August 20, 2019 Thanks guys, i can‘t wait to remove the paper as well :-).Gesendet von iPhone mit Tapatalk Quote Link to comment Share on other sites More sharing options...
Mupfel Posted August 20, 2019 Author Report Share Posted August 20, 2019 (edited) Finally, the result of the painting... but i am not satisfied. Probably need to do it again. What do you think? Now, i will start to create the ejection bolt parts out of wood... Thanks for commenting and posting guys! Have a great evening. Edited August 20, 2019 by Mupfel Quote Link to comment Share on other sites More sharing options...
T-Jay[TK] Posted August 21, 2019 Report Share Posted August 21, 2019 12 hours ago, Mupfel said: Finally, the result of the painting... but i am not satisfied. Probably need to do it again. What do you think? (...) Maybe you can make some corrections with a small brush. From the pictures everything looks good. What exactly are you not happy with? Quote Link to comment Share on other sites More sharing options...
Mupfel Posted August 21, 2019 Author Report Share Posted August 21, 2019 I will try it with a brush, yes...I am not satisfied with the tape, which i placed to cover the black painting...A more detailed picture is needed to see that, i think...Gesendet von iPhone mit Tapatalk Quote Link to comment Share on other sites More sharing options...
Bulldog44[TK] Posted August 22, 2019 Report Share Posted August 22, 2019 Hi Marko. The paint job looks great from what I can see. Nice rich black coat and the silver detailing really pops. Quote Link to comment Share on other sites More sharing options...
Dracotrooper Posted November 29, 2019 Report Share Posted November 29, 2019 Looking marvelous! Nice clean look from the factory Sent from my SM-G960W using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.