Jump to content

Doopydoos ANH E-11 build


paulbeer78

Recommended Posts

Hi all,

 

I’ve decided to build this blaster for display only, I am planning on upgrading and mod a few things to hopefully give this the used in battle look.

I’ve purchased a few upgrades from Tino and will be using his builds as a guide.

 

I have zero skill in anything like this so welcome any advice on how to make things better.

 

 

So the kits arrived and looks to all be there.

 

8712765e3458cadb1d62615bd2ad5fcd.jpg

 

So I have no particular order in which I will tackle this build. First I thought I’d hollow out the scope.c18d0e2eaee9be28a9d9638b739b31e7.jpg

I got a little carried away and broke through the wall this will need to be filled at a later date.

 

I next decided to try and make a metal trigger guard. 9c0237f867716b4f82dbd4143ffd4f7a.jpg

Does this shape look about right ?

Here is some comparison pics 47283779d1f92375dce14cb7f103173a.jpg

 

That’s all for now l.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Hi all,
 
I’ve decided to build this blaster for display only, I am planning on upgrading and mod a few things to hopefully give this the used in battle look.
I’ve purchased a few upgrades from Tino and will be using his builds as a guide.
 
I have zero skill in anything like this so welcome any advice on how to make things better.
 
 
So the kits arrived and looks to all be there.
 
8712765e3458cadb1d62615bd2ad5fcd.jpg
 
So I have no particular order in which I will tackle this build. First I thought I’d hollow out the scope.c18d0e2eaee9be28a9d9638b739b31e7.jpg
I got a little carried away and broke through the wall this will need to be filled at a later date.
 
I next decided to try and make a metal trigger guard. 9c0237f867716b4f82dbd4143ffd4f7a.jpg
Does this shape look about right ?
Here is some comparison pics 47283779d1f92375dce14cb7f103173a.jpg
 
That’s all for now l.
 
 
Sent from my iPhone using Tapatalk



Hi Paul.

Great to see you’ve started a build thread.

Here’s a side by side comparison I put together for he trigger guard, if it helps. :-)

3c3b48f98e85f6d324a567e6e8bf2cc3.jpg

That’s sterling vs DD. :-)


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

 

Hi Paul.

 

Great to see you’ve started a build thread.

 

Here’s a side by side comparison I put together for he trigger guard, if it helps. :-)

 

3c3b48f98e85f6d324a567e6e8bf2cc3.jpg

 

That’s sterling vs DD. :-)

 

 

Sent from my iPhone using Tapatalk

 

I’m not a million miles away then, I need to round it a little more. What did you bend yours around ? I did mine by hand but need to round it a little.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Hi Paul, good choice to start a build thread here and a nice progress so far. Trigger guard looks okay, maybe you can bring it closer to the trigger to reduce the gap at the bottom and curve that straight section. Not sure what you made the guard from, but please bear in mind, the aluminum stripe in the kit was meant for the scope rail. However, you can surely get the same (or similar) aluminum locally. It's 2x20 mm.

Dan (CableGuy) is currently running the same build (DoopyDoo's full resin kit with Completion Set V3.0) and Jesse (Dracotrooper) too. I am following each of you in case I can help and there will surely be a lot to learn from the other builds.

Enjoy your weekend and happy building :)

  • Like 1
Link to comment
Share on other sites

Hi Paul, good choice to start a build thread here and a nice progress so far. Trigger guard looks okay, maybe you can bring it closer to the trigger to reduce the gap at the bottom and curve that straight section. Not sure what you made the guard from, but please bear in mind, the aluminum stripe in the kit was meant for the scope rail. However, you can surely get the same (or similar) aluminum locally. It's 2x20 mm.
Dan (CableGuy) is currently running the same build (DoopyDoo's full resin kit with Completion Set V3.0) and Jesse (Dracotrooper) too. I am following each of you in case I can help and there will surely be a lot to learn from the other builds.
Enjoy your weekend and happy building



Hi Tino, Thanks for the input it’s much appreciated .made the guard from some 25mm metal I had lying around, I’ll make those adjustments and see how it fits.




Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

Hi Paul! Excited for you as you embark on this great adventure! With patience, forethought and a steady hand, you'll be holding a completed blaster in no time! Familiarity with tools and know-how will develop over time; you'll be a craftsman in your own right. And if you get it wrong, 'green stuff' will come save the day.

 

In my experience, keeping the FISD E-11 Blaster Reference close by is a good idea to give you the lay-of-the-land and insight on the build. I like to then dive into Tino's two builds to show me how it can be done, and done well in reaching personal build goals.

 

Look forward to future posts! Cheers!

  • Like 2
Link to comment
Share on other sites

Hi Paul! Excited for you as you embark on this great adventure! With patience, forethought and a steady hand, you'll be holding a completed blaster in no time! Familiarity with tools and know-how will develop over time; you'll be a craftsman in your own right. And if you get it wrong, 'green stuff' will come save the day.
 
In my experience, keeping the FISD E-11 Blaster Reference close by is a good idea to give you the lay-of-the-land and insight on the build. I like to then dive into Tino's two builds to show me how it can be done, and done well in reaching personal build goals.
 
Look forward to future posts! Cheers!



Thanks mate.


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

Last bit of progress today. Holes drilled out of the barrel.
5afc1b094ff6994ac50bd54e38ea7631.jpg


Blank drilled out and bolt fitted.

98d1be58fdb5d0e94361a0920436de93.jpg4568c7e35dec0d53238d3319d63ce6cb.jpg

Marked out and drilled 3 holes in the main body and handle, I used shelf holders to secure the 2 pieces.

9b263dc09596f5eaa1324af07bfebe6e.jpg

Drilled out the blanks on the front but got carried away so will need to make good with some green stuff
cf804533b32a02055a7caf446666a66b.jpg

Lastly how have you that have done this mod attached the lever to the click thingy.I’m struggling to see how to do it.

That’s all for today.




Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

7f8deb4dadc5c3463b9a2c26671edc56.jpg

So today my plan was to fit the switch in the handle and for it to click there is probably a quick and easy way to do this but I couldn’t find it, after many failed attempts with various bits of material I settled for a cut down screw and some glue. After channeling out the slot with the dremmel I popped the switch in and filled it with green stuff.

c5070538a84e0067d3fae7998bdabd11.jpg
Holes cleaned up.

While the green stuff dries/sets I thought I’d go back to the scope, this time I filed the smaller end to take the lens then attached the screws.3f41bfca361161cf915c683d2682535f.jpg2d3416cefea40f327e48047493bac0dd.jpg58f706de1c5f737375640a0d9cc402f9.jpg
Does this guard sit better ? 6e4563fb6d6c515fdfd131e29e240f88.jpge68b5fe6d85f40c4d8276001af590d4d.jpga8a3641cadb685773fdff73af9609d5b.jpg

Thanks


Sent from my iPhone using Tapatalk

  • Like 2
Link to comment
Share on other sites

7f8deb4dadc5c3463b9a2c26671edc56.jpg

So today my plan was to fit the switch in the handle and for it to click there is probably a quick and easy way to do this but I couldn’t find it, after many failed attempts with various bits of material I settled for a cut down screw and some glue. After channeling out the slot with the dremmel I popped the switch in and filled it with green stuff.

c5070538a84e0067d3fae7998bdabd11.jpg
Holes cleaned up.

While the green stuff dries/sets I thought I’d go back to the scope, this time I filed the smaller end to take the lens then attached the screws.3f41bfca361161cf915c683d2682535f.jpg2d3416cefea40f327e48047493bac0dd.jpg58f706de1c5f737375640a0d9cc402f9.jpg
Does this guard sit better ? 6e4563fb6d6c515fdfd131e29e240f88.jpge68b5fe6d85f40c4d8276001af590d4d.jpga8a3641cadb685773fdff73af9609d5b.jpg

Thanks


Sent from my iPhone using Tapatalk


Looks like solid progress, Paul. Tidy job in the switch. :-)


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites

Having a few struggles today. First I added the grub screw.
975472918c6acfc0ee35313d46215490.jpg

Then was time to get the mag housing drilled out ready for fitting.
0aa54bd2faa4ed98612372b01034af05.jpgf9c88352844d2ee69c667c168913038d.jpg

Next was time to prep various parts :

6f024702d786f8de201e4de608911fa8.jpg3dcdd60057b43099edfef72dfefc3fb0.jpg140f8d8e4e24fe425657bf17a2880ac9.jpg
Now the part that got me gritting my teeth, this should of been an easy but to do but for some reason just wouldn’t work. I had to use green stuff to stop the trigger coming forward and the spring falling out. If there is something I missed please fill me in .

Also is the guess looking right or does it need more adapting ?
bcb6de9fe846a87e625824d9fad15921.jpg22bd0dc2afd0b37befa250eeeda18f68.jpg479d61fc57043299c2de13e9638bf273.jpg

2efd9390bc5bf9ce114e123f1fd762c7.jpg again I got carried away with the sanding and had to use green stuff to reshape the clip. How to I get this to function ? I can’t find anything on the forums.


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Having a few struggles today. First I added the grub screw.
975472918c6acfc0ee35313d46215490.jpg

Then was time to get the mag housing drilled out ready for fitting.
0aa54bd2faa4ed98612372b01034af05.jpgf9c88352844d2ee69c667c168913038d.jpg

Next was time to prep various parts :

6f024702d786f8de201e4de608911fa8.jpg3dcdd60057b43099edfef72dfefc3fb0.jpg140f8d8e4e24fe425657bf17a2880ac9.jpg
Now the part that got me gritting my teeth, this should of been an easy but to do but for some reason just wouldn’t work. I had to use green stuff to stop the trigger coming forward and the spring falling out. If there is something I missed please fill me in .

Also is the guess looking right or does it need more adapting ?
bcb6de9fe846a87e625824d9fad15921.jpg22bd0dc2afd0b37befa250eeeda18f68.jpg479d61fc57043299c2de13e9638bf273.jpg

2efd9390bc5bf9ce114e123f1fd762c7.jpg again I got carried away with the sanding and had to use green stuff to reshape the clip. How to I get this to function ? I can’t find anything on the forums.


Sent from my iPhone using Tapatalk


Hi Paul,
Re the end cap clip and its functionality, Brian (bulldog) shares this on my thread.



Really shows how the clip should work. :-)


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites



Hi Paul,
Re the end cap clip and its functionality, Brian (bulldog) shares this on my thread.



Really shows how the clip should work. :-)


Sent from my iPhone using Tapatalk

That’s brilliant thanks, do you get this effect from the spring/wire in Tinos kit ?


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

I thought I’d tackle the stock this afternoon, I started by removing the fake pole ( this was a tedious job ) but I think I did ok .0ffc25c896ae12ade456e2cee668e394.jpg2baa819b5daf84297a4589ab03716b1b.jpg57a881c83a7d09640bc09781b64c589d.jpgb4f7b92308012a656a16646b7e121656.jpg
I attempted to make the end with a different version of green stuff, it still needs a sanding but otherwise looking ok.

Can anyone advise me on the trigger guard, I’d like to permanently fix it but am unsure if the angle is correct.

Thanks guys


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Hi Paul.

Doing well with the folding stock. I agree - it’s a bit of a mission getting all of that resin out. :-)

Depending on your painting plan, the trigger guard might want to wait. Depends what stages you have in mind for painting.

In terms of the shape, it’s probably a little down to personal preference. At a glance, you could probably go ‘out’ a little with the front curve.

e3be7908b2327872369efaf93526be9b.jpg

Nice work so far, mate. :-)


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites


That’s brilliant thanks, do you get this effect from the spring/wire in Tinos kit ?


Sent from my iPhone using Tapatalk

Hi Paul,
Apologies, I’ve just seen that I didn’t reply to this.

The original way to do it is below:

d19ddeb9726c8fd0ca6f4ac308d912ea.png

Essentially, a small price of curved metal to give the resistance. However, check out Tennantlim’s build - he did a handy trick with a shirt collar stay (the little plastic thingy). ;-)

I’m currently using a very small spring for mine - about 3 or 4mm high.

Hope that helps. :-)


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites


Hi Paul,
Apologies, I’ve just seen that I didn’t reply to this.

The original way to do it is below:

d19ddeb9726c8fd0ca6f4ac308d912ea.png

Essentially, a small price of curved metal to give the resistance. However, check out Tennantlim’s build - he did a handy trick with a shirt collar stay (the little plastic thingy). ;-)

I’m currently using a very small spring for mine - about 3 or 4mm high.

Hope that helps. :-)


Sent from my iPhone using Tapatalk


Thanks for the reference pics, I will see if I can figure something out. I’ll probably go for a spring as well.


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Not a lot of progress over the last few days.

First was to add some metal to the grip and I’m doing so have lost the click in the selector- I’ve decided it’s to much work to pull it all apart again so it’ll have to stay as is.

74b86324edd145b785bbf45e75990280.jpgaa777f6cdff8940e7daeaa365c0d2a53.jpg

Next I added a rare earth magnet to the mag housing the encased another in the mag using the old top that I cut off. 4fd16732665ff7ddfbbd5821deadb430.jpgdd71318c97790444cfecb367666a2bc5.jpg5f1acae7e7a767b44950514e730e753d.jpgdfb70974552f70fa8eabb7fa73413cac.jpg
5469e06db5e2fc81b04c7aadd00b408e.jpgbf9bf54536c773892ea5ba022784696d.jpg


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Not a lot of progress over the last few days.

First was to add some metal to the grip and I’m doing so have lost the click in the selector- I’ve decided it’s to much work to pull it all apart again so it’ll have to stay as is.

74b86324edd145b785bbf45e75990280.jpgaa777f6cdff8940e7daeaa365c0d2a53.jpg

Next I added a rare earth magnet to the mag housing the encased another in the mag using the old top that I cut off. 4fd16732665ff7ddfbbd5821deadb430.jpgdd71318c97790444cfecb367666a2bc5.jpg5f1acae7e7a767b44950514e730e753d.jpgdfb70974552f70fa8eabb7fa73413cac.jpg
5469e06db5e2fc81b04c7aadd00b408e.jpgbf9bf54536c773892ea5ba022784696d.jpg


Sent from my iPhone using Tapatalk

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...