Garry[TK] Posted February 23, 2017 Report Share Posted February 23, 2017 Hello everyone!! As I stated in my welcome post, I've had a dream to build my own Stormtrooper armor since I was six years old. I am now one tiny step closer to fulfilling that dream. I was able to locate and buy my Anovos ANH Stunt Kit from a fellow member who was looking to offload the unopened box and kit. I've laid out all the pieces (picture) and have to admit that I was already feeling overwhelmed and I haven't really started to do anything yet. And then I noticed the symmetry in the forearms was way off which lead to my first post. So, I'm backtracking a little bit and starting my build thread now. I've combed through a lot of the threads and How-To's and feel a little better about how and where to start. I'm working on gathering the tools and materials to get going on my forearms and biceps. Here we go! 1 Quote Link to comment Share on other sites More sharing options...
khausauer Posted February 23, 2017 Report Share Posted February 23, 2017 Hello everyone!! As I stated in my welcome post, I've had a dream to build my own Stormtrooper armor since I was six years old. I am now one tiny step closer to fulfilling that dream. I was able to locate and buy my Anovos ANH Stunt Kit from a fellow member who was looking to offload the unopened box and kit. I've laid out all the pieces (picture) and have to admit that I was already feeling overwhelmed and I haven't really started to do anything yet. And then I noticed the symmetry in the forearms was way off which lead to my first post. So, I'm backtracking a little bit and starting my build thread now. I've combed through a lot of the threads and How-To's and feel a little better about how and where to start. I'm working on gathering the tools and materials to get going on my forearms and biceps. Here we go! Great Stuff Garry!!!! Take your time and ask questions! I have found everyone here to be. Dry helpful as I make my own way through the same kit. Good luck to you!!! :dancing trooper: Sent from my iPad using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
68Brick[TK] Posted February 23, 2017 Report Share Posted February 23, 2017 Welcome. Piece by piece it will all come together! 1 Quote Link to comment Share on other sites More sharing options...
Triple D[TK] Posted February 23, 2017 Report Share Posted February 23, 2017 Welcome and Good Luck!!! As said before don't hesitate to ask questions and check out the tutorials. 1 Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted March 8, 2017 Author Report Share Posted March 8, 2017 (edited) Continuing on with my build thread... I finished the rough cut and trimming of my forearms, biceps, and shoulder bells. Admittedly, I was nervous getting started as I'm sure most of you can appreciate. It's difficult to get your self to cut into something new like that. I'll post photos later as I'm having issues with Photobucket and adding the links to this post. I have two questions (so far): 1. Does anyone have pictures of their completed forearms for Centurion Level? I want to be absolutely sure I know exactly what I'm cutting off in terms of removing the 'return edge.' 2. During the rough cut of one of my shoulder bells, I started a small crack on the bottom return edge of the shoulder piece. The crack is about 1/4 inch long. Does anyone have a recommendation on how to patch this up? Forearms, Biceps, and Shoulder Bells: http://imgur.com/p7Rm1CL Crack in shoulder bell photo: http://imgur.com/7a4TEoL Thanks! - Garry Edited February 23, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
bobafret[TK] Posted March 8, 2017 Report Share Posted March 8, 2017 Hi Garry! One of the best places to see armor is right here in the EIB and Centurion submission threads. The applicant lists the armor in the heading of their request, so you can go take a look at REALLY detailed photos of the Anovos kit and feedback on the builds relative to EIB and Centurion standards. I found that REALLY helpful when doing my first build. You can get a feel for the optimal assembly of your kit this way. Here are a couple Anovos Centurion approvals: http://www.whitearmor.net/forum/topic/40784-tk-82666-requesting-anh-stunt-centurion-status-anovos-309/ http://www.whitearmor.net/forum/topic/40333-tk-10998-requesting-anh-stunt-centurion-status-anovos-303/ As for your crack, you can most likely glue a piece of scrap ABS on the backside and then make some ABS paste to repair the crack. To make ABS paste you use scraps from your armor and cut it up into little pieces like confetti. Then add some acetone (you can get at the hardware store) and mix with a wooden stick. You're going for the consistency of toothpaste. You can then use this to patch cracks or holes. Once dried you can sand and polish and it will be all better! One final note on Anovos. Their trim lines leave you with a LOT of return edge. Again, look at the pieces in those EIB and Centurion submissions and you will get a feel for where people trimmed those back. Best of luck to you! 2 Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted March 10, 2017 Author Report Share Posted March 10, 2017 Thanks Dave!! The pictures are exactly what I needed. Appreciate the help!! - Garry Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted May 17, 2017 Author Report Share Posted May 17, 2017 (edited) So I've made some progress but it's been slow going the last few weeks. I've done the rough cut of the body pieces: http://imgur.com/tmj1DBu and started the measuring and fitment of my forearms and biceps: http://imgur.com/6FkmWSf I do have a question about the forearms and the gloves/hand guards. I've pretty much finished the fitment on my left forearm and bicep. I'm going for Centurion so I removed the return edge on my forearm and got the size really nice so it fits over my hand as I slide it on my forearm. I haven't gotten my L3 hand guards yet. I was thinking that when I have my bicep and forearm on my arm for my armor, how do I put on the glove with the rubber hand guard? No way my forearm piece will fit over the glove and guard (if I put the glove on first). Do you put the gloves on after the forearms and shove the end of the glove up into and under and forearm piece? http://imgur.com/WpXVDpR Glove and forearm alignment pic. I've searched and haven't been able to find a video, etc. of how troopers but on their armor with the Centurion level gloves/hand guards. Thanks - Garry Edited February 23, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
68Brick[TK] Posted May 17, 2017 Report Share Posted May 17, 2017 You got it Garry. Put your forearms on first then your gloves. Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted May 30, 2017 Author Report Share Posted May 30, 2017 (edited) A few more steps in the process completed and my forearms and biceps are taking shape. Left bicep completed. http://imgur.com/oTlvCLA I did have a slight issue on gluing down the cover strip on the back of the left bicep. I'm sure if I didn't get enough glue on the pieces or if I didn't use enough clamps/magnets (or both) but I have a small gap on the edge of the cover strip that is not fully engaged to the bicep piece: http://imgur.com/4HOlg5G I was going to see about fixing it but decided to wait since it's on the back of my bicep. Should I leave it as is? Or try to fix it? And if I go forward with fixing it, any advise on how to do so? Thanks!! Edited February 23, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted June 12, 2017 Author Report Share Posted June 12, 2017 (edited) I've finished my forearms and biceps (no strapping yet) and everything seems to be fitting good: Left: http://imgur.com/PWzyVnS Right: http://imgur.com/3Utnt5x Moving on to the thighs now - fitment , trim, fitment, trim... Thighs: http://imgur.com/KmK2yAT After working on the thighs over the weekend, I found had enough room on the top of the left thigh to trim out the curved space for the cover strip to be flush on each side. Can someone tell me how far up or down the thigh piece is supposed to fit? Should the bottom of the thigh stop at the top of or just above the knee? Or should the top of the thigh come up as far as possible? What is the proper placement of the thigh pieces? Edited February 24, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted June 30, 2017 Author Report Share Posted June 30, 2017 (edited) I didn't do anything more with the thighs from my last post. I didn't know how they were going to fit in the front with the Abs and in the rear with the Posterior so I decided to start working on those and fit the thighs later. Had a very productive weekend. Ab buttons painted: http://imgur.com/ZNJ70JF http://imgur.com/Y7WPwy2 Installed split rivet, snaps, and strap for Ab to Posterior: http://imgur.com/f8CIVH0 http://imgur.com/mgL4c7O Drilled holes for the bracket system for the Chest, Ab, Back, Kidney, and Posterior: http://imgur.com/tbTsW8w http://imgur.com/1nLn13F http://imgur.com/2CnW2Vs And finished the bracket supports: http://imgur.com/vVffdI6 Edited February 24, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted July 4, 2017 Author Report Share Posted July 4, 2017 (edited) Hey all! I'm going for Centurion Level and would like to know if these snaps are good for the Ab and Belt snaps as well as the 'nonfunctioning' snap on the upper right side: http://imgur.com/Mi3ZaWO http://imgur.com/Rl5kCwg Thanks! Edited February 24, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted July 11, 2017 Author Report Share Posted July 11, 2017 (edited) Another small step completed... painted the heads of the screws for the brackets and the heads of the rivets for the kidney/Ab and thigh ammo box. http://imgur.com/ooW2Q5B Edited February 24, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
bobafret[TK] Posted July 12, 2017 Report Share Posted July 12, 2017 On your question about thighs - all pieces fit relative to each other so it's best to do fittings with the other pieces and also with undersuit on not pants so you ensure you are getting proper and correct fit. That being said, thigh should be high enough but there should be space between cod and thigh. Also a bit of space between thigh and knee. check screen reference photos. Short troopers may have less space, taller troopers more. In general, I put my thigh on so that I can bend my leg and just feel the bottom of my thigh at the back of knee. But I'm taller so I have to kind of split the difference between cod and knee gap and ensure I'm relatively even and proportional. Hope that helps! 1 Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted July 12, 2017 Report Share Posted July 12, 2017 Just a quick question, Garry.. GREAT to hear that you are headed for Centurion, but are you planning on modding the Anovos bucket from a Stunt to a Hero? I did it, and as far as I know I am the only one to do it so far. I reached level 3 with mine and can give you a few tips if you decide to go that route, just PM me. 1 Quote Link to comment Share on other sites More sharing options...
Shanester[TK] Posted July 12, 2017 Report Share Posted July 12, 2017 Going for Centurion? Great news. Good luck pal! 2 Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted August 1, 2017 Author Report Share Posted August 1, 2017 (edited) Worked on getting the pieces of the torso put together - connected the back, kidney, posterior, chest, and ab pieces. Also attached the strap and snap for the left side. http://imgur.com/qi99iaF Will try a fitment check soon and see how everything is matching up. Edited February 24, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted September 17, 2017 Author Report Share Posted September 17, 2017 (edited) The build has been slow going lately but I have made some progress. I've working on the strapping for the torso and the shoulder bells: https://imgur.com/pWjmMHk https://imgur.com/pvc8Eqf I also added a 'tongue' and 'groove slot' to add some extra support on the side: https://imgur.com/ybx6CKV https://imgur.com/kBIrVxc I saw the idea for the support on another build but can't remember exactly where (or who) it was posted. But thanks to however it was - the addition works great! Edited February 24, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted November 7, 2017 Author Report Share Posted November 7, 2017 (edited) Completed the strapping for the shoulder bells, biceps, and forearms. https://imgur.com/wVqRDM1 Was going to see if I needed a strap from the shoulder bell to the bicep given I added the clip on the bicep. Any thoughts? Is the clip on the bicep and the strap across the bottom of the shoulder bell usually good enough? Or should I add the strap from the shoulder bell to the bicep as well? Edited February 24, 2018 by Garry Quote Link to comment Share on other sites More sharing options...
TheSwede[TK] Posted November 8, 2017 Report Share Posted November 8, 2017 Hey Garry, nice build bicep-clip should be enough so I say put the arms on and see how it works 1 Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted November 13, 2017 Author Report Share Posted November 13, 2017 (edited) When I started putting together and fitting the torso pieces, I noticed right away that the top shoulder tabs of my back plate were digging into my back. After researching the issue, it seems that it's a common problem with taller troopers. I considered reshaping the tabs with a hot water bath but I had already glued my shoulder straps and snap and wasn't sure what the water would do to the glue. So, I made the unnerving decision to use a heat gun on the tabs. I know, I know,... using a heat gun on the tabs went against all the recommendations I could find but I had to move forward. I guess I was lucky because the process of using the heat gun seems to have worked out for me. I put the torso on for a fitment check and the tabs on the back plate sit really comfortable on my back now. https://imgur.com/96b3BTB Using a heat gun is not a process I would recommend on reshaping the tabs - I was absolutely terrified to use it. Just thankful that it worked out and the fit seems to be really good now. Edited February 24, 2018 by Garry 2 Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted December 23, 2017 Author Report Share Posted December 23, 2017 (edited) Just a quick picture of the torso and arms. https://imgur.com/DhlQdgC It's coming together! Edited February 24, 2018 by Garry 2 Quote Link to comment Share on other sites More sharing options...
Frank75139[501st] Posted December 23, 2017 Report Share Posted December 23, 2017 Looking goodSent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Garry[TK] Posted December 27, 2017 Author Report Share Posted December 27, 2017 (edited) Thermal Detonator completed. https://imgur.com/EymxpbV https://imgur.com/8m2N2jp Edited February 24, 2018 by Garry 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.