Bozzy Posted October 14, 2016 Report Share Posted October 14, 2016 Firstly don't shoot me.. i couldn't get the 38.1 BUT... i am after some parts if they are available and if they fit .. if you fine people can point me in the right direction. Looking for a inner barrel, spring cup and bolt assembly in resin to fit the 40mm pipe Any help ? Quote Link to comment Share on other sites More sharing options...
Troopacoola[TK] Posted October 14, 2016 Report Share Posted October 14, 2016 Firstly don't shoot me.. i couldn't get the 38.1 BUT... i am after some parts if they are available and if they fit .. if you fine people can point me in the right direction. Looking for a inner barrel, spring cup and bolt assembly in resin to fit the 40mm pipe Any help ? Hello there! I've just completed my doopy build, and for the spring cup I cut down a permanent marker.As for the bolt, i was toying with cleaning out the resin on the doopy kit and making my own. I decided against it though, as the internal resin was too thick. I created the spring end of the bolt from abs, but seeing as you're doing a pipe build I reckon you could fashion one from thin aluminium and some styrene. I'm pretty sure someone will direct you where to get a resin one from though mate Where in Lancs are you? Marc My Wips... http://www.ukgarrison.co.uk/forum/viewtopic.php?t=61082 http://www.whitearmor.net/forum/index.php?/topic/38021-CTID's-RWA-ANH-Stunt-WIP......-501st-Here-we-go! http://www.ukgarrison.co.uk/forum/viewtopic.php?t=60937 http://www.whitearmor.net/forum/index.php?/topic/38731-CTID's-Doopy's-E-11-Build Quote Link to comment Share on other sites More sharing options...
Bozzy Posted October 14, 2016 Author Report Share Posted October 14, 2016 Hello there! I've just completed my doopy build, and for the spring cup I cut down a permanent marker.As for the bolt, i was toying with cleaning out the resin on the doopy kit and making my own. I decided against it though, as the internal resin was too thick. I created the spring end of the bolt from abs, but seeing as you're doing a pipe build I reckon you could fashion one from thin aluminium and some styrene. I'm pretty sure someone will direct you where to get a resin one from though mate Where in Lancs are you? Marc My Wips... http://www.ukgarrison.co.uk/forum/viewtopic.php?t=61082 http://www.whitearmor.net/forum/index.php?/topic/38021-CTID's-RWA-ANH-Stunt-WIP......-501st-Here-we-go! http://www.ukgarrison.co.uk/forum/viewtopic.php?t=60937 http://www.whitearmor.net/forum/index.php?/topic/38731-CTID's-Doopy's-E-11-Build Hi , Just outside Chorley .. Buckshaw village. I can craft stuff if needed but if it's readily available I'd rather go down that route to save time. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Troopacoola[TK] Posted October 14, 2016 Report Share Posted October 14, 2016 I'm in Manchester, I used to play football for Horwich RMI before moved to Leigh, many years ago! Have you tried Mark on the UKG? Marc Quote Link to comment Share on other sites More sharing options...
Troopacoola[TK] Posted October 15, 2016 Report Share Posted October 15, 2016 Resin bolts and inner barrels... http://www.whitearmor.net/forum/index.php?/topic/33001-Resin-cast-Sterling-barrel-and-bolt-spring-cup Marc Quote Link to comment Share on other sites More sharing options...
nmcguff Posted October 15, 2016 Report Share Posted October 15, 2016 If you have access to a 3D printer you may want to try the parts I have designed for 3D printing. I used an actual Sterling L2A3 and measured the parts and created models in Solidworks. You may need to scale up or down to fit the inner diameter of your pipe. You can find the parts here: http://www.whitearmor.net/forum/topic/31703-e-11-blaster-3d-printed-parts 1 Quote Link to comment Share on other sites More sharing options...
I'm Batman[501st] Posted October 21, 2016 Report Share Posted October 21, 2016 My first build (in my signature) was with 40mm pipe. Because it also had a bigger wall thickness it came out about the same inner diameter as a 38.1/1.6 tube. All the standard parts fitted great. Quote Link to comment Share on other sites More sharing options...
sla73 Posted October 21, 2016 Report Share Posted October 21, 2016 (edited) If you have access to a 3D printer you may want to try the parts I have designed for 3D printing. I used an actual Sterling L2A3 and measured the parts and created models in Solidworks. You may need to scale up or down to fit the inner diameter of your pipe. You can find the parts here: http://www.whitearmor.net/forum/topic/31703-e-11-blaster-3d-printed-parts Also try http://www.stormtrooperblaster.com/ - The parts are great, I have a few! He also has a 38.1 PVC pipe for sale.. Edited October 21, 2016 by sla73 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.