Jump to content

TFA TK Which Paint?


Recommended Posts

Greetings Troopers,

 

Many of you might know I have been building my ANOVOS TFA TK build the last few months. 

 

And.....well now its about time to paint this bad boy. But before I do that.

I would like to get some opinions/tips of what paint to use? How many coats of primer/Final Paint to put on? Dry Time? 

 

Right now where I live, its been 95 degrees plus everyday, sometimes in the 100s. I did some research and found that paint color (RAL 9010) is pretty close to the Film used TFAs. But the paint is only carried in the UK I believe. I did find some Rustoleum paint (Pure White) that looks like (RAL 9010) but everyone has been using the Rustoleum Gloss White 2x......Its a hard decision. If I roll with (RAL 9010) then I would have to paint the fiberglass helmet which Ive heard is stressful but can be mastered. Is it worth it to paint both helmet and armor?

 

Picked up a can of primer yesterday to spray test some parts to see if any pesky putty holes show up, as well 800 Grit Sand Paper to sand down slightly to cover the holes.

 

Really Nervous......Need your tips Troopers. (NOTE. I have 400 Grit paper to prep before painting)

Link to comment
Share on other sites

You're going to get different responses. Some people use rustolium but I use krylon. Some people use CA glue, others use epoxy.

 

I suggest reading the build threads and going from there. Good luck and have fun.

Link to comment
Share on other sites

I used Rustoleum Gloss White 2x without issue.

I did shake the hell out of the cans with this and never completly empied a can.

 

-Pete

http://www.whitearmor.net/forum/topic/32343-zaphods-first-order-tk-tfa-build-threadtk-31415abs-pastepic-heavy/?p=438295

Link to comment
Share on other sites

Another option - the one I went with - is to take your entire kit and have it professionally painted by an auto body repair/paint specialist.

 

I knew going in that my spray painting skills were lacking, and as expensive as the TFA kits are there was no way I was going to risk botching it up with a cheap paint job. A member of my garrison owns an auto body shop - complete with a pro-grade paint booth. I informed him of the recommended paint (Rustoleum 2x Gloss White), and he then bought a can and created a custom blend that was color-matched (via computer) to the Rustoleum paint and sprayed my entire kit (minus the fiberglass helmet) with it.

 

It wasn't cheap (it cost me $375 US) but IMO it well worth it. That's not just my opinion, either. Several other Anovos TFA TK owners (including at least three in my geographic vicinity) have gone a similar route.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

I own a kit and used duplicolor.

 

I plan to repaint it with PPG so it'll stand up..the trick will be is the Preval sprayer can handle it whi check would allow me to bypass a shop where I'd have to leave my armor.

 

Preval sprayer, thoughts?

 

Sent from my SAMSUNG-SM-N910A using Tapatalk

Link to comment
Share on other sites

I used automotive acrylic paint, not too bad for chipping or scratches and can be cut and buffed. To save getting too many chips I made fabric pouches for all of the armor parts to cart them safely, worked pretty well so far. Still get the odd scratch from a troop though.

Link to comment
Share on other sites

  • 5 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...