welshchris77[TK] Posted March 26, 2016 Report Share Posted March 26, 2016 (edited) Name = Chris Lewis501st TK ID = 11677FISD forum name = welshchris77Garrison = Ireland Garrison501st Legion Member Link = http://www.501st.com/members/displaymember.php?userID=20978&costumeID=124 Armor Maker= Anovos Helmet Maker= AnovosE-11 Blaster= Doopy DoosHeight= 6'.1"Weight= 176 poundsCanvas belt= the_tatooine_trader Hand Plates= JosephNeck Seal= AnovosHolster= Anovos Required photos: front Back Left Right Ab Helmet Blaster Drop box back Neck seal Hand Plates Forearm wrist Shoulder detail Cod/Butt attachment Inner strapping Thigh Pack Sniper knee Right ab kidney attachment TD Bucket off Action pose Thanks for your consideration. Additional:- A few Changes I have made to the Lid:- Eye return edges adjusted and lens colour shown Frown repainted Ear screw changed for v slotted 6.5mm machine screw. Additional Aditional After looking at other v slot screws I realized that mine still weren't right so I have changed them again. The first screw (no.1) were v slotted but slightly domed, the second (no.2) had a deeper slot so I was able to file the head flat (no.3) and use these instead! Also I removed the lower ear screws, which are partially hidden under the bottom rubber trim and drill new holes further up and replace these screws for a more accurate look. After a suggestion by a fellow trooper I have tightened up the right side Ok I have made an addition revision, (The last hopefully) The gap between the holster (50mm instead of 20mm) was really bugging me I didn't want to spend more money on 'another belt'!!, I just assumed that the gap was right on the anovos belt!, beware anyone copying the hole positions onto a new belt!!!, Anyway I thought of a fix, This may seem drastic but I cut my belt at the back and sowed it back together with an overlap to shorten it by 30mm, had to drill out one of the rivet I added but it came off without a problem unlike the the original anovos ones with the epoxy from hell, also my rivet cap came off easily as I had stuck it on with E6000. The fix it not noticeable from the outside and it is just as strong as it was before. Hopefully it will pass! Sorry about all the additions by the way Edited March 29, 2016 by welshchris77 Quote Link to comment Share on other sites More sharing options...
daryldoak[TK] Posted March 26, 2016 Report Share Posted March 26, 2016 (edited) Looks really good. Great job. Edited March 26, 2016 by daryldoak Quote Link to comment Share on other sites More sharing options...
PGHtrooper21 Posted March 26, 2016 Report Share Posted March 26, 2016 Excellent Job!!!!! Maybe just bring the forearms closer to the biceps. Andy Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 26, 2016 Author Report Share Posted March 26, 2016 Looks really good. Great job. Excellent Job!!!!! Maybe just bring the forearms closer to the biceps. Andy Thanks Guys Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 26, 2016 Author Report Share Posted March 26, 2016 I am not sure I have done my approval right as I see a number at the end of peoples 'request heading'. Did I take a wrong turn perhaps? Quote Link to comment Share on other sites More sharing options...
allan1313[TK] Posted March 26, 2016 Report Share Posted March 26, 2016 The number is added by the admins once you are approved. Good job! Sent from my Nexus 6P using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skypig[TK] Posted March 26, 2016 Report Share Posted March 26, 2016 Nice work. Good luck! Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 26, 2016 Author Report Share Posted March 26, 2016 The number is added by the admins once you are approved. Good job! Sent from my Nexus 6P using Tapatalk Ah right, thanks for clearing that up Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 26, 2016 Author Report Share Posted March 26, 2016 Nice work. Good luck! Thanks Michael Quote Link to comment Share on other sites More sharing options...
MrOrange Posted March 26, 2016 Report Share Posted March 26, 2016 Nice build! Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 26, 2016 Author Report Share Posted March 26, 2016 Nice build! Thanks Charles Quote Link to comment Share on other sites More sharing options...
justjoseph63[Staff] Posted March 26, 2016 Report Share Posted March 26, 2016 Looking GREAT, Chris! I really like that you went ahead and replaced the Anovos canvas belt, which will help when you apply for Centurion. Really nice build, sir! 1 Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 26, 2016 Author Report Share Posted March 26, 2016 Looking GREAT, Chris! I really like that you went ahead and replaced the Anovos canvas belt, which will help when you apply for Centurion. Really nice build, sir! Thanks Joseph, Your hand guards are great by the way, thanks for that Quote Link to comment Share on other sites More sharing options...
Squimspickle[TK] Posted March 28, 2016 Report Share Posted March 28, 2016 Nice looking armor Chris! It really fits you well. The one thing that sticks out to me is that your holster seems to be set back a little far on your belt. Not sure if that will affect your EIB request, but it may for requesting Centurion status. From the research I've done it should be 3/4" (2cm) distance from the end of the plastic part of the belt. This may not be an issue at all though. Once again, great looking armor! Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 28, 2016 Author Report Share Posted March 28, 2016 Nice looking armor Chris! It really fits you well. The one thing that sticks out to me is that your holster seems to be set back a little far on your belt. Not sure if that will affect your EIB request, but it may for requesting Centurion status. From the research I've done it should be 3/4" (2cm) distance from the end of the plastic part of the belt. This may not be an issue at all though. Once again, great looking armor! Thanks Aaron, Yeah im unsure about the belt, I just copied the position from the anovos belt but it does look a little 'set back' compared to others, hopefully it will be ok, I would hate to have to change the belt 'again'!!! 1 Quote Link to comment Share on other sites More sharing options...
68Brick[TK] Posted March 28, 2016 Report Share Posted March 28, 2016 Looks Good! My only suggestion is that on your right side, your ab plate is overlapping your kidney plate; they shouldn't overlap, but meet parallel to each other. It could be the way you were standing though. Nice Anovos TK! Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 28, 2016 Author Report Share Posted March 28, 2016 Looks Good! My only suggestion is that on your right side, your ab plate is overlapping your kidney plate; they shouldn't overlap, but meet parallel to each other. It could be the way you were standing though. Nice Anovos TK! Thanks Brad. I think its more to do with the way I'm standing and also the internal strapping, the snaps are set back a bit from the edge to give a bit more elasticity and movement there, the left side was similar but I also added velcro there to keep the two sides aligned better, may do this with the right side also Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted March 29, 2016 Report Share Posted March 29, 2016 Hey Chris thanks for your application, Sly or myself will be with your shortly. Quote Link to comment Share on other sites More sharing options...
humperdingle Posted March 29, 2016 Report Share Posted March 29, 2016 Nice work! Quote Link to comment Share on other sites More sharing options...
starsaber25[Admin] Posted March 29, 2016 Report Share Posted March 29, 2016 Hey Chris! Nice job on your armor! You made that anovos set look great! Good luck! Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 29, 2016 Author Report Share Posted March 29, 2016 Hey Chris thanks for your application, Sly or myself will be with your shortly. Ok thanks Tony Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 29, 2016 Author Report Share Posted March 29, 2016 Nice work! Hey Chris! Nice job on your armor! You made that anovos set look great! Good luck! Thanks guys Quote Link to comment Share on other sites More sharing options...
kman[TK] Posted March 29, 2016 Report Share Posted March 29, 2016 Great work! I look forward to seeing the feedback when the leadership responds. Quote Link to comment Share on other sites More sharing options...
welshchris77[TK] Posted March 29, 2016 Author Report Share Posted March 29, 2016 Great work! I look forward to seeing the feedback when the leadership responds. Thanks for the support Kalani Quote Link to comment Share on other sites More sharing options...
Anzo[TK] Posted March 30, 2016 Report Share Posted March 30, 2016 Best of luck to you sir. Looks great! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.