greyfox Posted July 30, 2017 Report Share Posted July 30, 2017 18 hours ago, ukswrath said: All normal Thank you. So I shouldn't cut the larger pieces down and leave it as it is instead? Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted July 30, 2017 Author Report Share Posted July 30, 2017 It doesn't matter in the grand scheme of things. Whatever works best for you. Take a look at some Centurion applications as see what others have done. https://www.whitearmor.net/forum/forum/72-request-centurion-status/ Quote Link to comment Share on other sites More sharing options...
greyfox Posted July 30, 2017 Report Share Posted July 30, 2017 thanks a lot! Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted July 30, 2017 Author Report Share Posted July 30, 2017 2 hours ago, greyfox said: thanks a lot! My pleasure, THT. Pay it forward 1 Quote Link to comment Share on other sites More sharing options...
fxdl2002[501st] Posted August 5, 2017 Report Share Posted August 5, 2017 I just discovered an electric eraser with a white vinyl eraser... Removes dried e6000 without scoring the plastic!!! Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted August 5, 2017 Author Report Share Posted August 5, 2017 23 minutes ago, fxdl2002 said: I just discovered an electric eraser with a white vinyl eraser... Removes dried e6000 without scoring the plastic!!! Very nice, could you post a link so we can take a look at it. Quote Link to comment Share on other sites More sharing options...
fxdl2002[501st] Posted August 5, 2017 Report Share Posted August 5, 2017 https://m.facebook.com/photo.php?fbid=10159095747840721&id=592260720&set=a.10151916858960721.874665.592260720&source=48&ref=m_notif¬if_t=feed_comment_reply Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted August 5, 2017 Author Report Share Posted August 5, 2017 1 hour ago, fxdl2002 said: https://m.facebook.com/photo.php?fbid=10159095747840721&id=592260720&set=a.10151916858960721.874665.592260720&source=48&ref=m_notif¬if_t=feed_comment_reply Will it melt or warp the ABS? Quote Link to comment Share on other sites More sharing options...
fxdl2002[501st] Posted August 13, 2017 Report Share Posted August 13, 2017 On 8/4/2017 at 11:07 PM, ukswrath said: Will it melt or warp the ABS? Not that I noticed. But I took it slow Quote Link to comment Share on other sites More sharing options...
Grizff18[TK] Posted August 17, 2017 Report Share Posted August 17, 2017 Great build! Has been helping me a lot! Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted August 18, 2017 Author Report Share Posted August 18, 2017 1 hour ago, Grizff18 said: Great build! Has been helping me a lot! Thank you, glads it's been of help. Quote Link to comment Share on other sites More sharing options...
Falc1 Posted September 1, 2017 Report Share Posted September 1, 2017 Hope all is well with you. I am back building my armor. Real life got in the way of course. My question is, I glued the shoulder connections, the ribbed plastic ones, exactly as you did in your guide, and now I noticed they don't line up correctly with back plate. I feel like my chestplate is a little to round maybe. As a matter of fact my helmet hit it when I test fit. Thoughts? Have you seen this before? I saw some of your AP guide talks a little about checking it but if the armor is shaped that way, what can you do? Thanks again for all your help. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted September 1, 2017 Author Report Share Posted September 1, 2017 Hey Joe got a photo? Quote Link to comment Share on other sites More sharing options...
Falc1 Posted September 1, 2017 Report Share Posted September 1, 2017 I will take one and post it when I get home. Thanks for the quick reply Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted September 1, 2017 Author Report Share Posted September 1, 2017 Copy that Quote Link to comment Share on other sites More sharing options...
Falc1 Posted September 2, 2017 Report Share Posted September 2, 2017 Quote Link to comment Share on other sites More sharing options...
Falc1 Posted September 2, 2017 Report Share Posted September 2, 2017 here you go. Sorry for the two replies but pics wouldn't attach. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted September 2, 2017 Author Report Share Posted September 2, 2017 Well you can re-glue them or add the Centurion level straps and see how they sit. Another option if you're afraid to damaged them just add some white velcro to hold them in place. Quote Link to comment Share on other sites More sharing options...
Falc1 Posted September 2, 2017 Report Share Posted September 2, 2017 ok. all good suggestions. I will try the straps first as I intended o using them anyway. Velcro is a smart idea too. I will let you know how it turns out. Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted September 2, 2017 Author Report Share Posted September 2, 2017 Quote Link to comment Share on other sites More sharing options...
darthanael Posted September 21, 2017 Report Share Posted September 21, 2017 On 2/2/2016 at 2:52 AM, ukswrath said: After comparing the measurements between left and right thighs the left would have to be trimmed. Measure, mark then trim excess. Hey Tony! Just reading through your build thread and trying to learn haha. So you you said you measured the right thigh top and bottom and then cut the left side accordingly. Did you do this so that they would look the same? Did you also test fit the left side or did you just use the same measurements from the right side only? Thanks in advance! Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted September 21, 2017 Author Report Share Posted September 21, 2017 1 minute ago, darthanael said: Hey Tony! Just reading through your build thread and trying to learn haha. So you you said you measured the right thigh top and bottom and then cut the left side accordingly. Did you do this so that they would look the same? Did you also test fit the left side or did you just use the same measurements from the right side only? Thanks in advance! Hey Nate glad to be of assistance. The goal here it the trim both sides equally (as possible) to evenly distribute the cover strip that will be used to connect the two. The leg cover strip is 20mm (except for calf which is 25mm). Trimming one half thigh and shin @ 10mm and the other 10mm is what you want. Get the picture? . Note, it doesn't have to be perfect. Hope this helps 1 Quote Link to comment Share on other sites More sharing options...
darthanael Posted September 21, 2017 Report Share Posted September 21, 2017 Just now, ukswrath said: Hey Nate glad to be of assistance. The goal here it the trim both sides equally (as possible) to evenly distribute the cover strip that will be used to connect the two. The leg cover strip is 20mm (except for calf which is 25mm). Trimming one half thigh and shin @ 10mm and the other 10mm is what you want. Get the picture? . Note, it doesn't have to be perfect. Hope this helps Oh okay I see. I think both front cover strips for the thighs and calves needed to be 20mm? And then fro both backs I was gonna do 25mm. Is this correct? Quote Link to comment Share on other sites More sharing options...
ukswrath[Staff] Posted September 21, 2017 Author Report Share Posted September 21, 2017 Oh okay I see. I think both front cover strips for the thighs and calves needed to be 20mm? And then fro both backs I was gonna do 25mm. Is this correct? Backhoe the thigh cover strips are 20mm also. Only the calves have 25mmSent from my SM-G955U using Tapatalk Quote Link to comment Share on other sites More sharing options...
magni[TK] Posted September 21, 2017 Report Share Posted September 21, 2017 Legs are 20mm with 25mm strip on back of calf to help hide bra clips or velcro. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.