Jump to content

SIMpixels RWA TX WIP


Recommended Posts

I decided that I wanted to do something that was a bit different but still had ties to the TKs I love. Hence my choice of a nice shiny black TX.

This weekend saw the arrival of my new armour kit from RWA. So, without further ado, this is my build thread! Apologies if all this appears as deja-vu to some of you as I'll be posting this on the UKG & Spec Ops forum too.

My personal weapons of choice are these:

3BFD0F2E-C66B-4E1E-B94C-597B8EE9A439_zps

I prefer to rough trim with my Lexan scissors, file to shape with some warding files, half round is my favourite. Then I sand with some pound shop (dollar store) sanding blocks that have been cut into quarters. Thrifty!

So, I've made a start on the left forearm. The guys at RWA have made it simple to differentiate between parts as the pulls have L or R embossed into the waste area.

81EBA39B-7907-46AF-B3F2-6AA753624CE9_zps

But, if you trim that bit off and can't remember further down the line. The One with 11 dimples is the left one, the right has 12.

E0929583-281B-431D-AF36-F07C879AB130_zps

I remember it as the words LEft and ELeven have the same first two letters (sad but true).

Alternatively, you could just write inside them.

At this point I'd usually be marking my returns with a pencil but that doesn't show up so well on the black, so where needed I'm using a white chinagraph pencil instead. Just to keep me on the right track.

Elbow end:
CD09DC48-38DA-4AA1-B6B2-1ABD2AB5C8F1_zps

Rough trim:
8F31C75E-DD85-460D-8A79-6B105FC0F7EB_zps

Filed & sanded:
597D5FC8-A79C-4CF8-8C7D-44E1128D9848_zps

In the pic above, the white edge is the dust collected under the protective coating that is on all the parts that were supplied. I'm leaving this in place as much as I can throughout the build right til the end, but here's it peeled back a bit so you can see what I'm doing.

1D41934D-2ED3-491C-A60C-66CF13AB6DD1_zps

At the wrist end I don't really want a return at all, I'll cut it back to the thickness of the armour just leaving the natural edge of the part in place.

Rough trim:
0B2D3C10-27AD-498E-9DEA-BD452EBECE03_zps

Filed & sanded:
5F9D055C-1797-4499-BD58-605677B97D37_zps

Protective coating pulled back:
997EBCDD-1549-4F95-94A8-B825D3A7199A_zps

As I say, I'll not be removing the coating all the time as I want to maintain the finish during the building process but here's the little RWA Isle of Wight logo that was in the box of bits which shows you how lovely and glossy the parts are under that protection (nice idea fellas).

7CC5F9CA-1913-406C-A5C1-061779EBAB5F_zps

So, that's the start of my WIP. I'm not in a mad rush to complete it, but I'm pretty sure it won't be too long.

More soon!

Si.

  • Like 3
Link to comment
Share on other sites

Okey doke, had a bit of time to continue my build...

Ā 

Inner biceps parts in untrimmed & trimmed:

6E03A5FD-4BAE-433A-950B-859BC081CD29_zps

Ā 

Outer biceps parts in untrimmed & trimmed:

2D1E4FE9-40B5-4A2A-A72D-2F34409C2FDC_zps

Ā 

Shoulder bell:

B35254DF-B822-4C6E-BE1A-1350003E4628_zps

Ā 

All the arm parts are now ready for fitting together. They may need a tweak trim here and there once that's done, but I'll cross that bridge (and show you what I did) if and when.

Ā 

B07C7098-2969-41D2-A211-E3F58DBD198A_zps

Ā 

Also had a delivery from the Imperial Supply Depot: a pair of aluminium TD clips and some armour polish.

Ā 

AB0BDE81-17FB-48B1-8254-5ACD0CA64EB2_zps

Ā 

I'm not usually known for buffing my TK but as my TX is gonna be ƃĀ¼ber shiny I thought I'd make sure I had something on standby for future reference.

Ā 

I'll be trimming torso parts next.

  • Like 2
Link to comment
Share on other sites

Torso time!

Ā 

According to the Shadow Stormtrooper CRL, the kidney and butt plate can be in one piece. Luckily for those of you who like that kind of thing, the RWA kit comes just like that.

Ā 

EB335238-7A94-460B-9315-0C694910C858_zps

Ā 

However, my heart lies with the ANH stylee so mine have been separated (which is also acceptable, phew).

Ā 

Here they are untrimmed and trimmed:

4D111202-2B4C-468D-880F-F5DFEFF6CB95_zps

Ā 

Abdomen/cod plate untrimmed and trimmed:

7E3C4BD7-95EB-4DE7-AF1C-E368D6D66949_zps

(not damaged, just has the protective coating ripped back)

Ā 

Chest plate untrimmed and trimmed:

AD323B5E-E2A4-4547-B3DA-69586C5DD97C_zps

Ā 

In my excitement I forgot to take an untrimmed photo of the back plate, so here's the trimmed one with a picture of SpongeBob on a unicycle with Patrick spectating (hope that more than makes up for my misdemeanour).

Ā 

02F5CD68-FEB6-454D-A017-1D3C89DCECB5_zps

Ā 

I'll be trimming the miscellaneous items tonight then start on the legs later in the week.

  • Like 3
Link to comment
Share on other sites

Still not got around to trimming my thighs, have had other stuff to do (nothing as interesting as Ninja training classes though).

Ā 

Anyway, here are my Thermal Detonator end caps. I've run out of masking tape so I used insulation tape to mark it instead. Not particularly clear for you to see but I could, so it did the job.

Ā 

2F08DFD3-D483-407E-9C52-6211478141D9_zps

Link to comment
Share on other sites

Continuing with my Detonator build. It's mostly tape & gravity at the moment as I forgot to pick my E6000 up. Doh!

Ā 

Anyhoo, here's the TD with some numbers for all you crazy cats that worry about all of that.

Ā 

F0EBF5B2-892C-4967-94D1-EBA24D9F3B47_zps

Ā 

5E5F1C8C-BC10-4720-8C61-971FEA2AD7CF_zps

Ā 

*disclaimer* This is my 7 ƂĀ½" Detonator. There are many like it, but this one is mine.

Ā 

These dimensions are based upon my own research and decisions. Go on, shoo, go and find this stuff out for yourselves, it's not obsession, it's just paying attention for goodness sake! ;)

Link to comment
Share on other sites

No armour updates today, been busy with other stuff.

Ā 

However...

Ā 

Inspired by firebladejedi's TK build I thought I'd treat myself to a pair of Keith's HOVI Mic Tips. Glad I did, they are fab! Here's a pic of them with my new t-shirt that arrived today.

Ā 

D89B17C8-674D-4C19-8509-35A760B1B0DA_zps

Ā 

I quite like subtle geekery, those that know will know and to everyone else... meh, I'm a fan of wholemeal bread! ;)

Ā 

More soon.

Link to comment
Share on other sites

  • 3 weeks later...

Tonight was shins night.

Ā 

I'm 6'1" and my TM TK has quite a gap at the back of my knee (the shins are his standard length ones). With this in mind I ordered a set of longer shins from RWA, hopefully they'll do the job of closing up that knee gap a bit.

Ā 

Anyhoo, on with the pics.

Ā 

Tops trimmed first...

3B8EA7A2-0BE9-49CE-81AA-9D1210A55317_zps

Ā 

Then the bottoms...

F01A7DEC-B786-45B5-8EC7-87B01691F132_zps

  • Like 1
Link to comment
Share on other sites

Is RWA new? I have never heard of that armor maker, anyways great looking build you got.

Thanks Cristian. :)

Ā 

RWA are fairly new on the block, it's their own sculpt they've been honing for quite a while. They started producing them for sale in May this year and are currently only supplying kits in the UK.

Link to comment
Share on other sites

I finished my shins the other night...

0DB2067E-7A9F-4A4D-A5FF-09F6A6EE3B96_zps

Ā 

And started gluing in my snaps...

EE5E6863-99DA-4C2C-8E3C-03622620CB7D_zps

Ā 

I'd forgotten how pleasant the smell of E6000 is (and what nippy little blighters magnets can be).

Ā 

Tonight I trimmed all my thigh parts...

9CECAE68-8B94-4FF7-AC65-EC9D61EF5D06_zps

Ā 

64424674-9224-444B-BA48-794DA1C59682_zps

Ā 

So that's now all my major body parts trimmed now. Just one or two smaller parts to do before I move on to the lid, which I've been putting off.

Ā 

It's not that I don't like doing them but they do stress me out more than the rest of the kit. It's just so iconic I always have worries about getting it right.

Ā 

Onward and upward!

  • Like 2
Link to comment
Share on other sites

  • 5 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...