Flyinpiper[TK] Posted May 15, 2015 Report Share Posted May 15, 2015 Just about ready to submit pics and found another issue I need to address. The Chelsea boots I purchased only go up into the shin guard about an inch, when walking the boots will pull right out and the shin will sit on top the boot. Not cool. The only reference I have seen on this is one guy put a snap in the top front of the boot, and inside the lower front of the shin. My concern with that is I could see the snap popping out pretty easy with the action of the foot. Any tips would be greatly appreciated! Quote Link to comment Share on other sites More sharing options...
dark_jedi_ire[TK] Posted May 15, 2015 Report Share Posted May 15, 2015 Velcro..... I know of a few that use Velcro on the Front of the shoe and just under the Shin, hidden ... Works Well Quote Link to comment Share on other sites More sharing options...
Mutter[TK] Posted May 15, 2015 Report Share Posted May 15, 2015 I place a 1"x1" patch of industrial velcro on the front of my boots and inside the front of my shins. I never have a problem. Quote Link to comment Share on other sites More sharing options...
Locitus[Admin] Posted May 15, 2015 Report Share Posted May 15, 2015 You can make stirrups that attach to the inside of the shin and loop around your foot. 2 Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted May 15, 2015 Report Share Posted May 15, 2015 Stirrups... just like on the Next Generation pants! I guess the white elastic for the shoulder bridges would work? 1 Quote Link to comment Share on other sites More sharing options...
DarkTrooper[TK] Posted May 15, 2015 Report Share Posted May 15, 2015 You can make stirrups that attach to the inside of the shin and loop around your foot. I have this on my set too. works great Quote Link to comment Share on other sites More sharing options...
bobio Posted May 15, 2015 Report Share Posted May 15, 2015 (edited) How about sewing in some white Velcro on the inside of the webbing in the boot and then making a strap to Velcro attached to the inside of the shin? Should be invisible on the webbing of the boot and you won't have to run anything under your foot. Just a thought Edited May 15, 2015 by bobio Quote Link to comment Share on other sites More sharing options...
HansDC[TK] Posted May 20, 2015 Report Share Posted May 20, 2015 Check out THIS THREAD for some fixes. Quote Link to comment Share on other sites More sharing options...
kcman[501st] Posted June 26, 2015 Report Share Posted June 26, 2015 I use industrial velcro. 1/2" pieces all around the top of the boot and inside the leg. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.