Jump to content
TK852

Using Plasti Dip for the interior

Recommended Posts

Told you it will look cool :)

 

Very good work done. Really liking the inside view on the last picture!

  • Like 1

Share this post


Link to post
Share on other sites

Cheesecloth is several pieces. Its more for looks, but it also gives the helmet a little more heft, plus it gives the illusion of a 1 piece helmet instead of just a buncha plastic.

 

Also, industrial strength velcro adheres pretty darn good to the finish, just don't attempt to unstick it and move it or the finish will come up with it. I did 1 heavy coat of plastidip/cheesecloth, the 2 more coats of just plastidip to finish it off. Smell was gone in a day and was completely wearable

  • Like 4

Share this post


Link to post
Share on other sites

I had a thought today about spraying with plastidip. If I have already cut out my frown and eyes, etc. what is the benefit to taping stuff off? Why not just spray and retrim the new plastdip. If it comes off so easily and doesn't leave any residue behind.

Share this post


Link to post
Share on other sites

I had a thought today about spraying with plastidip. If I have already cut out my frown and eyes, etc. what is the benefit to taping stuff off? Why not just spray and retrim the new plastdip. If it comes off so easily and doesn't leave any residue behind.

Taping off sections will take less time than getting the over spay off the outside of your bucket. Especially between the teeth and corners of the eyes.

Share this post


Link to post
Share on other sites

I know this is a bit of an older thread, but if anyone can answer these questions, it would be greatly appreciated.

1. At what stage would you do this?  (After what, and before what)
 

2. Because it's a spray, did you guys tape up your helmet like crazy beforehand?

 

Thanks!

 

EDIT:  My bad, for some reason I didn't see these following pages.  You guys have already answered all of my questions including great pics etc.  Thanks! 

Edited by MechaPumpkin

Share this post


Link to post
Share on other sites

Would it be more beneficial to spray first before trimming and everything, if you haven't started your helmet already? Seems like a good first step for those wanting to do this and just getting their kits in.

Share this post


Link to post
Share on other sites

Would it be more beneficial to spray first before trimming and everything, if you haven't started your helmet already? Seems like a good first step for those wanting to do this and just getting their kits in.

I have the same question, is there a reason you shouldn't paint the interior before cutting teeth and eyes?

  • Like 1

Share this post


Link to post
Share on other sites

Personally, I taped everything off after trimming to keep from getting the dip on unwanted areas. As for trimming after, you might be able to with a REALLY SHARP blade. The Plasti Dip is very elasticy and makes it a little hard to cut. Industrial Velcro sticks VERY well to the plasti Dip and could/will pull the Palsti Dip away like fuumantroop said. 

  • Like 1

Share this post


Link to post
Share on other sites

I'm guessing it might be easier to use the can of Plasti Dip and apply with a brush?  That way you might eliminate overspray or mistakes?

  • Like 1

Share this post


Link to post
Share on other sites

Plasti Dip is very easy to work will. Cleanup is similar to e6000. I had over spray on my frown and eyes and the took a clean rag and it rubs right off.

Edited by cjdesign

Share this post


Link to post
Share on other sites

Would it be more beneficial to spray first before trimming and everything, if you haven't started your helmet already? Seems like a good first step for those wanting to do this and just getting their kits in.

Yes, but you can damage the plasti dip finish during the assembly process. It can chip/scrape very easy.

Edited by cjdesign

Share this post


Link to post
Share on other sites

I used the brush method once completed/assembled , came out lovely. 4 coats.

 

 

a85ebf9143be21ac3becb64cb6fc3981.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 2

Share this post


Link to post
Share on other sites

I used plasti dip spray can (matte black) and I am really happy with the results.

Rafe,  Can I ask  how you got it to come out so smooth?  Others I've seen, the bucket interior looks very dimpled and NOT smooth.  Your's looks fantastic!

 

Thanks!

Share this post


Link to post
Share on other sites

   This looks GREAT !   And WHERE did you get the trim for your bucket ? I CAN NOT even see the seam !!!

 

 

Dan

 

 

I used the brush method once completed/assembled , came out lovely. 4 coats.


a85ebf9143be21ac3becb64cb6fc3981.jpg


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

i know after it dries it should not smell, but does it have a residual smell after you wear it a couple of times? 

Share this post


Link to post
Share on other sites

This looks GREAT ! And WHERE did you get the trim for your bucket ? I CAN NOT even see the seam !!!

 

 

Dan

I cheated and bought a completed bucket, so couldn't tell u about the seam. Did the dip myself though. Tricky but not too hard....tape over eyes and mouth, used a brush Bout 1" wide, like I say about 4 coats

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Would people advise spraying the plasti dip on the helmet assembled or as two separate pieces. I would have thought you'd get better coverage if it was separated.

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Would people advise spraying the plasti dip on the helmet assembled or as two separate pieces. I would have thought you'd get better coverage if it was separated.

 

 

Sent from my iPhone using Tapatalk

Personally, Assembled. It hides many seams and generally alleviates any "plastic creak".

Share this post


Link to post
Share on other sites

I took mine apart and sprayed the halves with 3 coats of Plasti Dip. then I went over it with some leftover hammered paint, and another two coats of Plasti Dip. finish looks amazing

Share this post


Link to post
Share on other sites

What are the advantages of having a black helmet interior?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...