nDreaZ Posted April 19, 2013 Report Share Posted April 19, 2013 Howdy! I've just started on my Hasbro conversion. And when I was trying to remove the rear scope cap. It broke. I've basically glued togehter the pieces. Any ideas what to use to fill in the cracks? Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted April 19, 2013 Report Share Posted April 19, 2013 Cover the hole from the back with some fabric and CA glue, then put some bondo on the outside. Sand. Paint. Quote Link to comment Share on other sites More sharing options...
Sonnenschein Posted April 19, 2013 Report Share Posted April 19, 2013 Or find a bottle cap of the same size Quote Link to comment Share on other sites More sharing options...
MxPxRobbie[TK] Posted April 19, 2013 Report Share Posted April 19, 2013 (edited) A cool mod to do is this: get an empty Scotch tape roll (some sort of small tape roll). Paint it. Cut screw post from inside scope so the barrel is hollow. Get a small plastic magnifying glass (dollar stores sell them in eyeglass repair kits) Cut magnifying glass down to size, and glue into one side of the tape roll. OPTIONAL: Put picture of crosshairs behind lens Glue tape roll to end of scope Here are some pics from a fellow trooper: Looks good, is cheap. Edited April 19, 2013 by MxPxRobbie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.