Dark Trooper[TK] Posted April 19, 2013 Report Share Posted April 19, 2013 I was wondering when I build my hasbro blaster with the Doopydoos conversion kit would I be able to get Expert Infantry? Quote Link to comment Share on other sites More sharing options...
TK bondservnt[501st] Posted April 19, 2013 Report Share Posted April 19, 2013 (edited) For level two certification (if applicable): Folding stock (does not need to function). A real or replica ammo counter - based off of a Hengstler counter - shall be present. D-ring mounted on the rear. Correct style scope. Two power cylinders on the magazine housing. Scratch-built, resin cast, Hyperfirm rubber cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered). If using the Hasbro E11 toy blaster and you cover all the rows of holes, the blaster will have 7 T-tracks total. But, if you want to have the correct number of T-tracks (6 total) with the lower row of open vent holes on the magazine housing side, then you shall cover the pre-existing rows of holes with T-tracks, and grind off the lower integrated T-track on the magazine housing side and drill a new row of holes in its place. No ESB/ROTJ greeblies are allowed on the blaster. Edited April 19, 2013 by TK Bondservnt 2392 Quote Link to comment Share on other sites More sharing options...
kecro Posted April 19, 2013 Report Share Posted April 19, 2013 What size does the wire have to be that runs from the power cylinders to the counter? I have just some regular black wire. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.