TheDecisiveRaindrop
-
Posts
144 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by TheDecisiveRaindrop
-
-
Let this build thread rain with photo drops!
Hope you see what I did there. How's the build goin?
So I haven’t actually started yet. One of the guys in Flagstaff offered to let me work on the armor at their place since they have a dedicated work area for tk armor with all the tools I need. Communication has been hazy with the whole pandemic, but they messaged me today saying I’d be welcomed to their home. Just need to schedule a time. -
Sorry, I got carried away and was too excited to post the pictures on here yet. I’m just using Tapatalk for my picture needs. Here are some pictures
-
3
-
-
Bit of a status update with my blaster. The magazine has been added to the reciever and glued to the pipe. I painted the blaster a silver color, giving it 2-3 good coats before I put on a solid first coat of black paint, then a lighter coat later on. All was going well so far.
After I put on a black coat, tragedy struck and the magazine assembly broke off. I was using E6000 which I now understand why from experience it is the recommended glue, but it wasn’t quite strong enough for my liking.
I then sanded down and removed the paint where the ammo counter was gonna be mounted.
Next came the part where I added some wood to the magazine assembly to give it more surface area to cling on to.
I used a 3900 psi epoxy, and this was my first time using an adhesive that strong. I wore a respirator and gloves while working with it.
Got the scope and the rest of the greeblies attached, except for the end cap. That’s just resting there. I had the shell ejection port masked along with the T rings. The ejection port is still the silver color that I put on before the black paint, and the T strips I intend on going over those with Flex Seal to give it a rubbery feel.
As time went on, I realized I made a horrible, terrible mistake that seemed so obvious. The black paint I used was glossy, and it stuck to every surface I sat it on, as well as catch all the dirt and dust from outside where I was working on it. Something had to be done.
And by the power of acetone, I was going to try to remove as much of the gloss paint as I could and leave as much of the silver paint underneath it.
I ended up calling this as “good enough” and I saw that because of how sticky the gloss paint was, it created all these unique textures that I actually really liked. So I decided to keep then and basically start painting all over again.
I used a much nicer silver paint and tried to find the closest to brass color for the scope. Hopefully you can see the texturing on the blaster, reminded me of cast iron surfaces. As a tank nerd, this really pleased me.
Painted the blaster with a flat black this time. I decided I wanted to try a trick I saw with other weapons where you put graphite on the surface to give it a sort of dark sheen to it, so I gave it a go.
To be continued shorty. (I realized I haven’t taken pictures of the weathering yet)
-
1
-
-
After waiting for what felt like eternity with everything going on, I finally received my BBB, and with the help of my local garrison mates, I’ll be inducted into the legion in no time! (Hopefully)
-
2
-
-
25 minutes ago, justjoseph63 said:
If it were me, I would reconsider using a 3D printed rail, JR. The reason being is that it will be pretty thin, and since you will have not only the scope, but the Hengstler counter as well mounted to it, if it gets bumped hard the rail could break. Ouch.
I would seriously think about using steel or aluminum. You can pick up a 3/4 wide strip from Lowe's for a few bucks (in the hardware area), cut it to length and cut/bend then end. There is an EXCELLENT tutorial here that will help: https://www.whitearmor.net/forum/topic/32111-fisd-e-11-blaster-reference/?do=findComment&comment=414706
Although you can order the one piece metal ones (bracket attached to the rail as seen on your 3D printed one) online, I just bought an L shaped bracket (Lowe's), screwed it to the counter and then to the rail.
I was originally going to use an aluminum rail, but last night I decided to go for a less conventional route that may sacrifice accuracy. I’m already in the process of 3d printing an M38 hollowed scope and keep the resin scope for another project I have planned. Regardless, I’ve reinforced the rail and supported the ammo counter bracket and it is surprisingly solid.
Granted this is not a trooping blaster with the soul intent is just something for me to play around with. I have no doubt will break with prolonged use, but for the time being, I’m happy with this stop gap measure of putting a wooden piece under the ammo bracket. The rail isn’t flexing, and I’ve made more surface area for the ammo counter to be securely glued and fastened. Thinking I may use an epoxy weld to make sure everything is solid just as a further precaution.
I am really glad you provided that link however, because now I have a backup plan for when mine eventually fails, although I still want to give this a shot.
Quick question though, what height should the ammo counter be? I tried looking at the gallery section but couldn’t really find any detailed pictures for the E-11. I looked through the high res ANH blu-ray pictures and it seemed that the blasters with the counters had them lower, basically resting on the stock. I don’t really trust any of the google image results.
-
Decided before I put my last coat of primer, I’d start gluing together the pieces. Between the months of me opening the box and painting the pieces, I ended up loosing the rear crosshair and the D-ring, but thankfully for me I can 3d print replacements.
Oh, I also printed out a rail. The rail will be further sanded, as well as a few more coats of paint. It wasn’t my best print, but it is certainly useable. -
So after almost 5 months of waiting for BBB day, it still hasn’t arrived yet. My vendor says it should be another week or so until is ships. Decided to bust out a project I meant to have done months ago, which is a Doopydoo kit. I’ll get pictures posted as soon as I can figure out how on Tapatalk. I keep getting errors.
I have most of the parts primed, and will begin gluing the parts together before I add one last primer coat (My coats aren’t exactly thorough)
Edit: Pictures are working now.
-
2
-
-
On 6/25/2020 at 7:51 PM, GoofTrooper said:
Hello JR! Don't mind me I'm just creeping on other Arizona prospective members. I'm a TK with the Dune Sea Garrison down in Phoenix but I'm no stranger to Flagstaff. In fact, I was born there! I'm originally from just down the road in Winslow but I've been the Valley for most of my life now. I spent five years living in Flagstaff while I went to NAU and I sure do miss it a lot! It seems like you're pretty familar here and with the Dune Sea forums, so that's awesome. I was just wondering if you have received your kit yet and started a build thread? I look forward to seeing your work!
Hi Eric! The kit is taking quite a bit longer to get, but with everything going on right now it's understandable. . I have most of the supplies needed, just need the plastic to really begin working. I do have some other 501st projects to work on in the meantime, so I'm just taking it slow. I do need to finish my doopydoo blaster, and I'll try to get a thread for that going later.
-
This is where the fun begins.
-
1
-
-
That's a black Rubies Stormtrooper costume. From what I've heard, it requires serious rework and modifications to get it to spec and lots of folks here would say that the modification process isn't worth it for the price. I'll let people with more knowledge on the matter give you a more definitive answer though.
Edit: I just looked at the link hereAnd a brief blurb here sums up what I mentioned earlier:
"Even though the Rubies TK armor is licensed by Lucas Films, it is not acceptable for Legion membership without a LOT of work and putting a LOT more money and time into it. The average price for a Rubies Supreme Stormtrooper Costume is $400USD (305 Euros) to $700USD (535 Euros). But, after you factor in that you will have to purchase a replacement helmet, buy supplies to modify the armor, all this, just to get the Rubies TK armor up to Legion standards. It would be cheaper and easier for you to start with a new armor kit.
There have been a few members that have done Rubies with all the upgrades, but afterwards said they spent a lot of time and money and will be looking into a different suit of armor next."-
1
-
-
Ah, ok fair enough then. Thanks!
-
Been mewling over ideas for a design, but I must ask, is there a place where all the official FISD pictures are at? I did not see anything in the gallery. Sorry in advance if it was obvious and I missed it.
Edit: Oh, and can we design our patches with digitally painted badges in mind, or just normal embroidered style ones? -
Looking good! I am amazed at how well the hovi tips and the painted vents turned out!
-
Watching your thread is making me anxious for when I start working on my kit...
-
1
-
-
Sounds like a good plan, I've been wanting to do the same.
-
I bought similar helmet padding for use in my helmet, they are pretty cheap on amazon. Like 14 bucks or so.
-
I got a special putty glue sort of deal that Joseph here on the forums recommends. I'll also need to find myself some gray paint for the teeth when the time comes. Any plans for getting electronics in that bucket?
-
2 minutes ago, CableGuy said:
Hehe. Good spot - I think that’s been edited in. (Or my attention to detail has really dropped off - lol).
Probably the former, judging by the timestamps
-
20 minutes ago, CableGuy said:
Well done on all of your prep! :-)
What make is the helmet (and armour)? That will have an effect on how you cut it as some are molded differently to others.
This is how I built my Troopermaster helmet. This series of videos go through how I planned where to cut based upon accurate ear alignment and faceplate alignment. Faceplate alignment is key to an accurate, ANH stunt helmet. :-)
He has an ATA build according to the OP. And man... With everything going on, I just want to get started on my armor already. I just have to wait a few more days (hopefully) before I start my own thread on here.
Anyways, I hope to see a lot more progress from you in the future, Brave! I feel like you are more prepared than I am at this point.
-
1
-
-
I'm getting some serious tank driver vibes from some of those helmets, and while I love the tank troopers, I am not sure how I feel about a guard wearing similar helmets to them. The other designs however, I love. They remind me of Revan's helmet.
-
2
-
-
1 hour ago, Bravely Casual said:
When I gotten my BBB, the helmet came with screws and other things. The hovi mic tips will need to be painted black on the outside, but they should be the same color as the vocoder right?
Also I took a look into the Praetorian blasters page and just wondering how sturdy are those prop guns btw? Is it hard rubber?
I’ve read that they are the sturdiest blasters that money can buy. I believe that they are hard rubber. Hopefully I can get the funds to get my hands on one soon enough. They are also more detailed/accurate than Hyperfirm blasters (One of the founders of Hyperfirm made Praetorian). It’s something you ought to look up if you are interested, cuz’ I sure know I am!
-
1
-
-
I don’t believe I have seen any DIY kits available, but IIRC, Praetorian sells rubber DLTs. I’m going to be buying one of their rubber E-11s since I’ve heard that is one of the best weapons to troop with due to their durability and excellent details. I’ve seen people use those blasters to go Centurion.
When working on your helmet, be aware that for Centurion status you need proper screws. Joseph on here sells them for about 8 bucks or so, he also has the proper gloves and hand armor. Extremely convenient!
Another thing to note is the hovi tips, the speakers near the chin. Centurion requires the insides to be white. What I did recently is order Ukswrath’s helmet electronic kit that includes centurion level hovi speakers (that are functional speakers mind you), voice changer, hearing assist and so forth for when I put together my helmet. The price for that kit is about $270+ PP fee (He has cheaper options as well). I should be receiving my own kit within the next few days.
To find everything, just look in the For Sale section for it. All of it should be stickied.
An important thing to remember is that my experience is very limited on here, and that everything I say is something that should be taken with a grain of salt. I’m just bringing up ideas to warrant your own research in the matter to decide if that is the route you want to go.
-
Some day I’ll be able to afford one of your aluminum kits
-
1
-
-
Something that I want to ask is if you have your soft parts picked out yet, and what kind of blaster you want to go for
Raindrop’s 4.5 AM ANH Stunt Build
in ANH Build Threads
Posted
I started the build this Monday at a local member’s home. They gave me access to all their equipment and has given me a lot of advice.
So for resources, I have him and this binder I put together with some various guides as well as the CRL handy for quick reference. I’ve also been reviewing TK 1636’s videos as well.
First step I took was simply getting used to cutting the thicker ABS plastic that AM 4.5 uses. The first part of the armor I’m working on is the arms, as my mentor recommended. I’m currently working with his scrap PETG plastic to use as interior cover strips, I’ll be snagging spare ABS sheets that came with my kit for the exterior cover strips.