-
Posts
15 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Architect18112
-
-
Requesting EIB Certificate (EIB 905)
1. First Name: Maria Katrina
2. Last name: Maloom
3. 501st ID (TK number) : TK18112
4. Paper size: Letter size
5. The name of the DO that did your final approval. : Daniel (March 2019)
Thanks!
My pleasure, Trina! https://www.whitearmor.net/eib/certificates/18112-eib.png
- 1
-
This girl is a goal-getter and finally the most coveted badge is now under my name. I am deeply honored to join the elite ranks and even more the 500th Centurion!
But this would not be possible without the support, advices and suggestions of you guys… FISD, Detachment staff and DOs. (Special thanks to Sly11, TKSpartan, TheSwede, justjoseph63, ShaSha)
Thank You Very Much Everyone! (in Filipino: Maraming Salamat!)
Slow clap to all the men and women before me… the Strong Centurion 500. We all did it! Congratulations FISD! Cheers!
Well, it seems...I’m not too short to troop after all.
- TK18112
- 9
-
Joined the 501st Legion in 2018, became Expert Infantry in 2019 and now… the 500th Centurion.
This was something my husband and I wanted to achieve for the longest time but a lot of things - planned or unplanned happened. When I saw the forum thread of less than 10 remaining slots before Centurion 500, I pushed myself to work and submit my Centurion application and inched my way into the first 500. I remember panicking while seeing the other guys getting approved one by one and I’m like here still working through project deadlines. But this girl is a goal-getter and finally the most coveted badge is now under my name. I am deeply honored to join the elite ranks!
But this would not be possible without the support of you guys… FISD, Detachment staff and DOs.
I truly appreciate all the hard work and time you give for advices and suggestions to improve each and everyone’s armor. Even the simplest cheers from fellow members gives that extra boost of confidence. All comments and suggestions listed by Sly11 are well-taken. Thank You Very Much Everyone! (in Filipino: Maraming Salamat!)
Special thanks to Sly11, TKSpartan, TheSwede, justjoseph63, ShaSha… and to NINJAM0VE for achieving our #AdulthoodDreams together.
Slow clap to all the men and women before me… the Strong Centurion 500. We all did it! Congratulations FISD! Cheers!
Well, it seems I’m not too short to troop after all.
- TK18112
- 6
-
Hi Mario, here's the photos of the blaster as requested:
Blaster left side
Blaster top view showing hengstler counter alignment
- 1
-
After intense weeks of work deadlines... finally had the time and energy to work on the modifications (and catch up some sleep) over the Easter weekend.
I must admit, I did felt the pressure of the other guys getting approved while I was itching to finish my work...
So here are the photos for your consideration (fingers crossed):
Pencil marks removed in the vocoder:
Ab Button Panel trimmed and buttons repainted:
Hand guards repainted:
Back lower ridges of thighs sealed with abs paste:
- 3
-
1 hour ago, justjoseph63 said:
Any updates on this, Trina?
Hi! Life happened and still caught up on work deadlines... I haven't got the time to squeeze in armor work...and sleep.. Here's to hoping I could get free time soon.
- 2
-
1 hour ago, TKSpartan said:
Hi Tina, I will be making your review .
You have made a great work with the EIB fixed requested and your armor looks awesome, only a few quick fixes are needed before we can add the Centurion Badge under your name:
Looking closely to your helmet's vocoder , it looks like there are like "pencil marks" around the top bumps , we are requesting to clean up this area .
Personally I would suggest to take the next step for a better look and reshape a little the vocoder’s details. but this is only a suggestion.
References
Next we have the Ab buttons panel , the large one needs to be trimmed a little . The sides should not extend over the raised ridges, but should sit inside them and have no rounded corners. Also we need you to clean up a little the buttons paint so it doesn't extend beyond the raised edges.
CRL: Ab button paint shall not extend beyond the bottom of the actual raised button
Reference
You have a shiny white armor, but the guards are way too weathered. The painting session will need to include a new coat of white paint for them
References
Finally. You may also want to glue some scraps of ABS behind the gaps in the back lower ridges of the thighs or fill them with ABS paste.
References
We are confident that you can address the requested fixes. Your Centurion Badge is waiting for you Tina.
Really appreciate your reply and comments.. Will get to work on the modifications soon.. Can’t wait for the coveted Centurion badge! Woohoo!
- 1
-
General Info
· Name = Maria Katrina Maloom
· TK ID = 18112
· FISD Name = Architect18112
· Garrison = Cebu Scarif Garrison
Body Type
· Height = 5’4”
· Weight = 56 kg
Costume
· Armor Maker = AP
· Helmet Maker = AP
· Blaster Type = Doopy Doos Full Resin Kit
· Boots = Imperial Boots
· Canvas Belt = DIY
· Hand Plates Type = Trooperbay ANH Stunt White Rubber
· Electronics = None
· Neckseal Maker = Darman Props
· Holster Maker = Darman Props
EIB Link:
Armor Photos
Full Body Front
Full Body Back
Full Right
Full Right – Arms raised
Right Side Detail
Full Left
Full Left – Arms raised
Left Side Detail
Action Shot
Helmet Off
Armor Details
Gloves
Shoulder Bridge Back
Thigh Pack Attachment
Sniper Knee Attachment
Drop Box Back
Crotch/Butt Detail
Helmet Detail Photos
Front
Sides
Back
Hovi tip / Vocoder details
Lens color
S-Trim
Accessory Photos
Ammo Belt and Holster
Neckseal
Boots
Blaster left side
Blaster right side
Blaster D-ring
Thermal detonator
Interior Strapping
Abdomen Detail
Kidney Plate Notch
Split Rivets Abdomen to Kidney Plate
Abdomen Plate
Forearm Details
- 2
-
Thanks guys for the approval, the suggestions and the warm welcome to the EI!
Will review what I can do to improve for my centurion application ... hopefully I can finish and submit soon!
- 1
-
Photos showing the inner fixings of knee ammo belt.
Photo of TD showing all 4 screws.
Sniper Knee Plate adjusted
E-11 Blaster
-
On 3/2/2019 at 7:00 AM, TheSwede said:
Hi Trina
I just noticed you haven´t included pics of your blaster showing both sides, could you please upload one of the "hengstler side" - thanks in advance and appologies I didn´t spot that at the beginning.
Thanks.. will do that too and find time during the weekend.
-
1 hour ago, TheSwede said:
Hey Trina and thank you for your EIB Application
Like others said - great job in sizing the armor to fit
A couple of things before we can get started:
# Photos showing the inner fixings of knee ammo belt.
# Photo of TD showing all 4 screws.
# Hardest part - CRL L2 states: Sniper knee plate must be aligned with the ridges on the shin.
The sniper plate holds some challenges for alot of Trooper and one way of dealing with it is to off-set the shin itself, others use brute force with clamps and magnets. If you would like a second opinion before you try and re-attach you can always post some new pics showing the sniper knee straight on from the sides as the pics you provided has an angle to them and I can take another look - and I might seem a bit picky about the left one (in this pic) but from the looks of things as the right (in this pic) need some re-alligning I figured I draw that up to, but anyway, if you like to post some more pics I´d be happy to take a look at them
Noted on this! Thanks for the feedback! Will take photos and upload them soon.
- 1
-
General Info
· Name = Maria Katrina Maloom
· TK ID = 18112
· FISD Name = Architect18112
· Garrison = Philippine Garrison
Body Type
· Height = 5’4”
· Weight = 56 kg
Costume
· Armor Maker = AP
· Helmet Maker = AP
· Blaster Type = Doopy Doos Full Resin Kit
· Boots = Imperial Boots
· Canvas Belt = DIY
· Hand Plates Type = Trooperbay ANH Stunt White Rubber
· Electronics = None
· Neckseal Maker = Darman Props
· Holster Maker = Darman Props
Photos
Full Body
Front – Arms at side
Back – Arms at side
Left – Arms raised
Right – Arms raised
Right side detail – Arms raised
Left side details – Arms raised
Action Shot
Helmet Off
Armor Details
Abdomen Details
Cod and Butt Plate Attachment
Interior Strapping
Shoulder Elastic Straps
Kidney Plate Notch
Ammo Belt and Holster
Forearm Details
Hand Plates
Thigh Pack Attachment
Knee Plate
Split Rivets Abdomen to Kidney Plate
Abdomen Plate
Helmet Details
Front
Sides
Back
Vocoder / Teeth Details
Lens Color Backlit
S-Trim
Blaster Details
D-Ring
Accessory Details
Neck Seal
Thermal Detonator – Front
Thermal Detonator - Back
Thank you!
- 2
-
Requesting 501st access for TK-18112. Thanks!
https://www.501st.com/members/displaymemberdetails.php?userID=29023
Request your Centurion Certificate here:
in Request Centurion Status
Posted
Requesting Centurion Certificate (Centurion 500)
1. First Name: Maria Katrina
2. Last name: Maloom
3. 501st ID (TK number) : TK18112
4. Paper size: Letter size
5. The name of the DO that did your final approval. : Andrew (April 2021)
Thanks!
https://www.whitearmor.net/eib/certificates/18112-centurion.png