halliwax
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by halliwax
-
-
Did some more weathering, removed the slide to remove the wires inside the airsoft
And glued the counter on the side, I have been vocal about this but my buddy wants it glued
Hope the e6000 holds it..
Sent from my iPhone using Tapatalk -
He wants ANH, I personally would do rogue one.
You see he’s a good friend of mine, we were each going to do one this summer. Build them both at the same time
It would also give me enough time to save up for my own airsoft and parts
BUT luuke posted a airsoft and scope in the classifieds I let my friend know and he snatched it right up.
So he jumped the gun on me
He’s doing the airsoft with
Roys track
Field Marshall scope
Field Marshall counter
Field Marshall power cylinders
He also orders field Marshall’s end cap. I guess it’s more accurate? I don’t know if it will fit right on or if I’ll have to machine it to fit... I’ll cross that line when I get there
I was planning on my own r1 version. Since there are suppose to be millions of these in the Star Wars galaxy I won’t hesitate to make my very own version of the blaster, mixing and mashing things
I also collect flash lights, so once I saw one bolted to the side of the e11 I knew that’s the route I was going
Sent from my iPhone using Tapatalk -
Good job! What's your next move?
This is what I got done so far...
I screwed up the counter. I drilled it on the wrong side (upside down)
I filled the holes with bondo and used this 90* bracket. I milled out a slot under the scope rail, and use the same bolt to hold the scope to hold the bracket
I am now thinking of getting 1-1/2” aluminum angle iron, and cutting it the same length as the counter and using both screws on the scope to hold the counter
You can move the counter with the 1 bracket I don’t like that...
Sent from my iPhone using Tapatalk -
Just finished it about 30 minutes ago
Sent from my iPhone using Tapatalk- 1
-
I was able to strip it down last night, pushed 1 pin out and it came right apart
Sent from my iPhone using Tapatalk -
So they didn’t remove the cap, cut it to length then install the cap back... interesting
Sent from my iPhone using Tapatalk -
Hey gang! My first post here, a friend of mine on the rpf told me to come over here for help.
A friend of mine just got a airsoft he wants to convert over to an ANH e11. We got this setup here
I got some metal flat stock (aluminum) to make a scope mount, and counter mount
But my real concern is chopping the magazine down
I have found videos on how to take apart a real magazine, but this air soft, the end plate doesn’t seem to budget at all?
I was wondering if there is any tutorials out there on how to correctly cut down the magazine?
As always I appreciate your time and hope I posted this in the correct section
Thank you
Sent from my iPhone using Tapatalk
E11 airsoft magazine chop tutorial?
in ANH BlasTech E11
Posted
More progress today, e6000’ed the power cylinders on. And put a war machine end cap on the air soft
Ground the inside down little with my mill, and finished with my Dremel. Since I don’t have a rotary table yet
Some taps of the rubber hammer
Sent from my iPhone using Tapatalk