[Doopydoos Full Resin Kit WIP + Tino,Chris + more, Additional Parts]

go for it mate...have a beer..or two! I was gonna have a night off tonight but ended up doing the end cap clip and adding the strip to the bolt


Sent from my iPhone using Tapatalk

[WIP: ImperialBrewer's Doopydoo Blaster Build with Tino's completion kit]

Seconded...The electrical switch for the selector seemed a little too daunting for me! Mine still moves, but doesn’t click....nicely done!.


Sent from my iPhone using Tapatalk

[Doopydoos Full Resin Kit WIP + Tino,Chris + more, Additional Parts]

Wow! A lot of effort going into this Jesse! Very impressive work!


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Forgot I’d fitted a sight pin too! Had to make my own as I haven’t got a clue what I’ve done with the one that came in Tino’s kit! Think I need to push the grub screw in a little further...


Sent from my iPhone using Tapatalk

[WIP: ImperialBrewer's Doopydoo Blaster Build with Tino's completion kit]

Good luck with the build Michael. Looking forward to seeing yr progress pictures! I was a bit worried about doing mine but with the Blaster Reference that Dan shared and all the other threads on here there’s plenty of visual references. Also, don’t be afraid to ask questions, the wealth of knowledge and experience on here is phenomenal!


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Haha! Exactly the problem I had! When I finally got to fitting them the first time I’d got the polarity wrong. Then I had to try pull them back out of the green stuff, clean them off and try again


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Thanks Jesse! I used two in the mag and two in the housing. Had to get my head round installing them the right way round because of polarity. Would be just my luck to get them stuck in only to find they repelled rather than attracted! I made the trigger guard out of a thin piece of aluminium I managed to scrounge from the mechanic at work..I’m really pleased with how it turned out.


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Ok, so I got a little frustrated with the very slow progress and I claimed from the start that I wasn’t going to try break any boundaries with my build. With this in mind I decided to start putting the pieces together and worry about painting later. Tonight’s progress as follows


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Last bit for tonight...grub screw into magazine housing, led into magazine and magnets fitted.


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Bit more done today...green stuff on sight guard and knurled, also added some to the sight block so I can shape it better when it’s set. On to sorting out the end cap and D ring now


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Need to get some more for when I do the scope...only got 16 and 22mm in my drill set . Well..,,that wasn’t easy! Took some hollowing! Trimmed the false bolts from the end of the stock, drilled for the replacements, hollowed the body out, drilled through the butt part and put a groove around it to give the impression it’s a separate part. Just need to make a hinge for the back end.


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Cheers guys, I’ll have a bash at that in a bit. Trying to hollow out the stock now!


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Cheers guys, I’ll have a bash at that in a bit. Trying to hollow out the stock now!


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Bit more work on the receiver today....drilled a few holes at the ends of the tracks to try give the impression that they go into the barrel and trimmed the ejection port to try give the impression that its separate parts.


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Bit more work on the receiver today....drilled a few holes at the ends of the tracks to try give the impression that they go into the barrel and trimmed the ejection port to try give the impression that its separate parts.


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Thanks Jesse...very kind of u. I’m thinking I might have to make a new sight block from scratch. The resin one looks too small for me to get a symmetrical finish to it? What do u guys think?


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Not sure why the same comment posted again?! I’ll take some more shots tomorrow


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Yeh...they aren’t too bad tbh...do u think I can get away with them?


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Yeh...they aren’t too bad tbh...do u think I can get away with them?


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

And that’s it for today unfortunately...hopefully continue tomorrow


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Not quite as neat but definitely better. Gonna try hollow the ends out a litt too like u did to make it look like the tracks are actually going into the holes.


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Haha...I promise I haven’t Dan, thanks for the encouragement! I’m currently trying to tackle yr idea of trimming around the t tracks to make them appear like separate components. My cordless drill just died too, waiting for it to charge now


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

That’s good enough for me! thanks Jesse!

Started work on the barrel next. Holes drilled where the sock goes, next job the hex bolts fitted (hopefully)


Sent from my iPhone using Tapatalk

[First ever blaster build using Doopys, Tino’s kit and hopefully lots of luck!]

Bit more progress this morning...
Moving selector switch fitted and trigger guard test fit. I decided not to go with the electrical switch in Tino’s kit (sorry Tino ) but I felt digging the handle out enough to fit it and then rebuilding in green stuff was a little beyond my already limited skills! Do I leave the nobbly bit in the grip next to the selector as it is or is it replaced by something?


Sent from my iPhone using Tapatalk