-
Posts
85 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Dragon_a
-
-
Did you get approved with the new "game accurate version" in the end?
- 1
-
Amazing work.
Question for those with more experience: If I print the game accurate versions will I run into problems with approval as they dont exactly match the example pictured on the crl?
I know the crl is worded that it should "closely match the reference pictures".
-
I need to scale my boxes too for my slightly smaller oil pan (and my slightly smaller body) so 3d printing is a great solution. I'd love to try these out.
- 1
-
I am just starting to source the parts to build a pack. The oil pan that seems to be favoured here isn’t available here in Australia. I have found this one though:
----------------
Now obviously the handle and spout on the bottom would have to be removed and any resulting holes filled. Would the slightly rounded bottom that would leave me with be any problem?
- 1
-
Hi Alex. I think it was me who 1st gave you the bad news over on the MEPD forums (I'm an approved Mimban myself).
One other option not mentioned yet: the person who you got this from sold it to you as something that you will get approved as a mimban and that it was used at the premier. This is clearly not true and constitutes false advertising. My 1st port of call would be to the seller to ask for my money back (especially as the guy is a supposed approved seller).
-
I have my BBB full of Walt's finest ready to go (after I've finished another project ahead of it in the queue). This is a great reference and I'm sure I'll be coming back to it a lot. Thanks for taking the time to write it.
- 1
-
11 hours ago, Bulldog44 said:
These are just very rough measurements from the pack I made. Height 70cm and with about 65cm . This is taking the rolled canvas into the measuremtn not just the frame. About 70cm from the bottom to the top of the rolled canvas. Hope this helps.
I wouldn’t worry too much about the pack looking big. You can tighten up the canvas more to get a sleeker look but backpacks are always going to look big but impressive! If you like the pack, go for it.
Just what i needed to know. Thanks.
- 1
-
I’d really like to add this pack to my R1 armour when it’s finished, however I’m aware that as I’m only 5’6” it might not be an option. On the screen used troopers the pack came from just above the TD to around the middle of the helmet and was about shoulder width. I’m concerned that on me it will look way too big.
what are the measurements of the pack (height and width)?
-
Or you can contact him through Facebook also.
- 1
-
31 minutes ago, darthcue said:
He’s going to make a new hole
Sent from my iPhone using TapatalkAh. That's what i couldn't see properly on the pic. All good.
-
I can't see properly on your pic but did you fill the round hole behind the right hand shoulder? That is supposed to be there.
- 1
-
-
-
11 hours ago, jim trooper said:
im scare to build it myself expensive stuff and im a noob on every thing l need to build it
We all started off as noobs
Before doing this I’d made my scout armour but this was a whole new challenge and I definitely made my share of mistakes but Jim’s fibreglass is forgiving.
It is quite daunting but as another poster on here said : there’s only one way to eat an elephant, 1 bite at a time. You start with the smaller, simpler parts and build your techniques and confidence.
-
Pretty much any armour for any type of stormtrooper will require some amount of building. At present there is only 1 maker of Rogue One armour and that requires both building and painting.
But isn't that the fun?
-
Looks like the helmet is slightly different to the standard TK, the one on the left appears to have a Blast Shield similar to a Shoretrooper.
They're found on Mimban which is desciribed as a "Swamp Planet", the same place as the Mudtrooper so I'd be willing to bet that it is dirt rather than camouflage. In which case these guys will going to the MEPD.
-
A few pages back on this thread the option of weathering was bought up since every TK on screen is weathered to some degree, even those not wearing packs.
Is this an option that needs to be formalised in the crl (as is the case with shoretroopers or tankers) or something more unofficial and at your GML's discretion?
-
9 hours ago, Parquette said:
Yes, but outside of R1 all TK's have them generically (outside of Rebels), so it's a canon thing.
But this is the crl for a *Rogue One TK* not a generic TK.
If you don't see it on screen it shouldn't be in the crl that is the "canon thing"
- 3
-
The holster (under optional) should be removed, no Rogue One TKs had them.
-
I also forgot to post pics of how I close the ab / kidney armour (or, as I've come to call it: the girdle).
I have 2 elastic strips with velcro on either end which can hold it together while having enough stretch to allow me to put it on back to front and then shuffle it round my body until the front is at the front.
I then have a small piece of elastic to line it up correctly. Lastly I bought 2 pairs of rare earth magnets attaching one inside the armour and the other inside the back plate. This hold the back plate on and also holds the grirdle together nicely. It's also a lot easier than velcro, I could almost just throw the back plate over my shoulder and it'll snap into exactly the right place.
-
I've got the ones from Imperial Boots:
- 1
-
That's pretty similar to how mine is looking. Ive got velcro on some pieces of elastic which allow me to put it on back to front and then it stretches enough to let me push it round. I've then put a small piece of velcro at the bottom to keep it inline. Lastly two pairs of rare earth magnets, one pair glued to the back plate which will connect to the other pair glued inside the ab / kidney.
I'll take some pics tonight.
-
10 hours ago, Big Deal said:
I haven't made as much progress as I would have liked but I'm slowly pushing through. I'm ready to attach the back plate to the abdominal section, but I'm not sure how it's supposed to sit. The plate has a curve that doesn't really sit flush. Have others shaved it down a bit?
This is something Im trying to figure out too. I was thinking about attaching it with magnets so I could put it on myself when dressing.
On that subject, how are you closing the kidney / ab section at the back?
-
36 minutes ago, Tk-436888 said:
Where can I get a rogue one armor kit?
I'd read Glen's post 3 posts up....
501st Trooper Status Requests (Include link to your 501st profile in your request!)
in 501st and Detachment Access Requests
Posted
My HWT is now official, kindly requesting FISD access.
https://www.501st.com/members/displaymemberdetails.php?userID=24387