[Username Change Request - Stormystormtrooper to Stormy 3D]

6 hours ago, Sly11 said:

Done for you T.M.

 

Many thanks. Appreciate it!

[Username Change Request - Stormystormtrooper to Stormy 3D]

Please let me know if this is the incorrect place to post, but I would like to request a username change. I created this account quite a long time ago, and was wanting to shorten my username to "Stormy 3D'".

Thank you in advance! Please let me know if there are any issues.

[Sterling Spring/Wire - Source?]

10 hours ago, T-Jay said:

Hi Josh, the thickness of the wire makes a very big difference here. The original spring wire's thickness was 1.8 mm.

A wire of that thickness can be wrapped around a broomstick for example to get a suitable result.

With 2.0 mm and more it gets much harder.

 

When wrapping the wire around the broomstick, protect your hands by wearing gloves. That makes it easier.

 

Thank you for the tips! I'll look around for one in that size. Any recommendations on where the best place is to purchase one? So far, I've only managed to find some on Ebay. Thanks again.

[Sterling Spring/Wire - Source?]

Hello everyone,

 

Recently, I've been working on making an E11. However, I've been having a lot of trouble sourcing a wire that is both accurate, and is easily made into a spring. (Unless there is already a spring pre-made). 

 

I've tried coat-hanger wire, but I've had little success. Does anyone have any ideas where I could buy a budget-friendly wire? Any help is appreciated! Thanks in advance. 

[How long is your scope rail?]

On 7/19/2019 at 12:25 PM, gmrhodes13 said:

 

 

Length of rail is in the diagram in that thread and the bends.

 

Thank you for that, I must be blind! Didn't notice that on my first view.  Grateful for the help, sorry I didn't notice it earlier.

[How long is your scope rail?]

18 minutes ago, gmrhodes13 said:

This may help 

 

Thank you, that thread is plenty helpful! But I was mostly looking for the length of the Scope Rail, as well as where the bends are made. I couldn't find that info in the thread, unfortunately. 

[How long is your scope rail?]

Hello everyone. I'm currently working on my own build, and I had a quick question. How long is your scope rail? Unfortunately, I have to redo the main body, and so I need a measurement, so I can properly cut the holes, and cut the scope rail properly. I'd preferably like the dimensions from a doopy do's kit, but it shouldn't matter much. Any help is really appreciated. Thank you for the read! 

[ANH E-11 Supply/Info List]

On 7/14/2019 at 11:54 PM, T-Jay said:

@Stormystormtrooper Hi Toshi, just came across this great list today again and have an update:

 

Unfortunately the E-11 resin kits from Phoenix Props (cast in dark grey resin) and the replacement magazines from gazmosis are meanwhile no longer available.  Sad thing.

Thank you for the update. That's unfortunate. 

[Phasma is Phrightening! (JB's belated TFA build thread)]

Good luck on this! It takes a lot of confidence to start. Feel free to ask around. for anything.

[Rocket Trooper CRL Discussion]

8 hours ago, TK 14166 said:

Actually I’ve been working on the BF2 version  for a bit now. It’s still a WIP. 

 

Looking really awesome so far. Good luck! Can't wait to see it finished.

[kmart890 Death Trooper build]

Looking good... great job on the weathering!

[Rogue One 3D Files?]

Hello everyone. Sorry if this has been asked before, but I am looking for some 3D files of an R1TK. I saw a post earlier, but they seem to be deleted. Any advice on this would be appreciated. Thank you.

[HOWTO: Make Black Series R1 bucket more accurate]

Agreed, I was looking forward to this tutorial. Did anyone get a backup? That would help a ton.

[Zeddys Rogue One TK build (jimmiroquai)]

Don't say that mate... it takes a lot of patience, but it will be worth it in the end. It's pretty dang demotivating, but you just gotta keep pushing. Best of luck.

[Rocket Trooper CRL Discussion]

On 10/24/2018 at 2:35 PM, gmrhodes13 said:

There could be two possible CRL's, animated and movie style, each would follow the screen references so both would be accurate in their own right.

That seems to be what would happen, they seem a bit too different to be considered to be the same CRL.

 

On 10/26/2018 at 5:49 PM, Ericnathan811 said:

Oh I feel so stupid, I didn't see the post with the link to the pack for sale. Guess theres no need to worry about 3d printing it if crooknight already has! Well if that's the case I can now say that I'll be converting my armor to it for sure!

Best of luck! I'd be glad to see that. I think I missed the pack link, could you point me to it? Thanks. (Nevermind, found it!) I hope I am allowed to post em.

https://www.etsy.com/listing/628744129/replica-star-wars-battlefront-2?ref=shop_home_feat_1

 

[HOWTO: Wetsand & Polish for a great shine!]

Sorry if I missed it, but what are those sanding pads you are using? Anywhere you could get them in those sizes? Thanks!

[Rocket Trooper CRL Discussion]

The differences I have found between Rebels and Battlefront:

 

The air hoses. In rebels, the hoses are connected to the jetpack. In Battlefront, they are connected to the chestbox, unique only to the battlefront trooper.

 

The armor. The helmet in battlefront is from Return of the Jedi. The one from rebels is the animated one, BUT, it has a little greeble on the chin. The lens are also one piece. The frown appears to be much thinner, painted white. 

 

In rebels, there also appears to be "grunts" jump troopers without the orange shoulder armor. These are not in battlefront. 

 

 

[Rocket Trooper CRL Discussion]

 

Now for the jetpack. (Pardon the spam.)

 

 

[Rocket Trooper CRL Discussion]

I managed to scrape together a few images from the game files:

 

[Rocket Trooper CRL Discussion]

11 minutes ago, gmrhodes13 said:

Someone has to physically build one then have it submitted via their GML to the LMO team for consideration of becoming approved and then made model for the CRL before a CRL can go live 

I thought as much. Thanks for the reply! Hope we can see this someday.

[Rocket Trooper CRL Discussion]

Any news on this? Recently saw it in-game, and quickly went over here.

[Adjusting fan speed?]

1 hour ago, MMcFett said:

Check this thread:
https://r.tapatalk.com/shareLink?url=https://www.whitearmor.net/forum/topic/45601-fs-cooling-fans-with-speed-control/&share_tid=45601&share_fid=44557&share_type=t

Sent from my Pixel 2 XL using Tapatalk
 

Yeah, that is what inspired me to ask. I was wondering how exactly he did that, and how I could do it myself. Thanks though!

[Adjusting fan speed?]

Hey, everyone. I have been doing some research here on the forums on helmet fans for quite a while, but I have a question. Is there a way to control the fan speed? I know that usually, this is not needed. But I just wanted to know if there is any solid way, such as a knob. Thanks.

[ANH Stunt Green Lenses?]

7 minutes ago, Rat said:

Green welders shield will do. Look up welding supplies. I believe #4 is the right one.
 

 

I see, thanks. I found this on the search as well: https://www.amazon.com/Forney-58603-Grinding-Shield-Replacement/dp/B003X3UAMY#customerReviews

Would that do? Thanks for the reply.

[ANH Stunt Green Lenses?]

I was wondering where I could get the green lenses for an ANH Stunt.  The reason being, my current ones are destroyed beyond repair. I know that it is basically a dark green sheet, but I'm not sure where to get it. If possible, I would like it to not be expensive, I'm a pretty tight budget. Thanks!