[FOTK Vinyl Pauldrons Final Prototype]

On 3/5/2017 at 6:19 AM, TK4205 said:

It looks great and you did a fantastic job on your kit.

 

Someone else was having the same problem with my pauldron on Jim's kit. But untill I get a good measurement, or get to size one fist hand, my pauldrons fit the anovos kit best.

 

TK12406 approves this pauldrons for Jimmi Kits

 

------------

[The Last Jedi (TLJ) Stormtroopers - a first look]

Seems like it could be done with a "simple" faceplate replacement, no? Not much else seems to have changed. Personally, i like it.

[Officer shoulder pouches]

So, some time has passed and now that i have my officer pauldron i am still looking for an option for these. Looked up on trooperbay and the sandtrooper pouch might just do it for me, even if they are a bit different. I just like the combined look of pauldron and pouches.

[Shoretroopers are TK, not Scout. *Confirmed*]

Yep, let us discuss this again. It was so much fun the first time round.

[501st Trooper Status Requests (Include link to your 501st profile in your request!)]

TK 12406 requesting detachment access

 

http://www.501st.com/members/displaymember.php?userID=20885&costumeID=326

[IMPERIAL BOOTS]

Give it the full 30 days to arrive. You will not be disappointed

[Matching armor paint to Anovos helmet]

Just confirming here, that the RAL 9016 is a perfect 100% match for the Anovos Standard bucket

[FOTK Forearm problem]

You mean the chipped part? Well, fix it with some filler! Or, if you are impatient, use super glue and baking soda to roughly fill it up and then sand it down.

[R1 Stormtrooper Bell and Bicep armour attachment]

Apparently the mouth plate is meant to be taken off for repairs and maintenance (thats what they said in the archeology panel). Would love to see how it looks without it.

[TFA Stormtrooper Farbe]

Ja, weiss glänzend!

 

Bin leider auch kein Farbexperte - deswegen lass ich es mir auch machen Habe die Belton 9016 probiert, und der matcht ganz gut mit dem Anovos. Leider ist die Farbe nicht elastisch, deswegen bricht sie auf, wenn man das Teil biegt. Grundierung ist genauso wichtig wie alle anderen Schichten. Bricht die Grundierung, bricht auch die Farbe, egal wie elastisch die ist.

 

Es gibt natürlich super Grundierungen von Tamya, die du im Modellbauladen bekommst, die elastisch sind, aber leider auch teuer. Für die ganze Rüstung musst du dann schon mit einigen Kosten rechnen. Wie gesagt, probier es mal mit einem kleinen biegsamen Teil aus, zb. der Knieplatte, die du dann auch wieder leicht abschleifen kannst.

[Matching armor paint to Anovos helmet]

You could use decals from trooperbay for the small black parts

 

https://trooperbay.com/decals/prop-replica-decals/star-wars-props/troopers-tk/tfa-first-order-stormtrooper-armor-decal-set

 

This is for Jimmiroquais Kit though

[TFA Stormtrooper Farbe]

Wenn du einen Anovos Standard Helm hast, kannst du einen RAL 9016 nehmen, wenn du den Helm nicht lackieren willst. Das sollte ganz gut matchen. Wenn du Helm und Rüstung lackieren willst, kannst du RAL 9010 nehmen - das kommt eher an den Film ran, da dies einen gelblichen Stich hat (9016 eher leicht blau). Zb. bietet Belton hier in mehreren Varianten die Farbtöne an. Allerdings sind diese wenig elastisch und könnten daher reissen. Am besten ist, du kaufst dir mal eine Dose 9010 oder 9016 (oder beides) und probierst mal. Wichtig ist, dass die Grundierung ebenfalls elastisch ist.

 

Ich habe das Jimmiroquai Kit und werde alles professionell in von einem Auto Lackierer machen lassen - nicht günstig, aber dafür sollte es elastisch sein.

[What to design and 3D print [run] next?]

How about the new blasters from R1

[Jimmiroquai Rogue One Builds]

Dunno about Germany, but his fotk kits arrived to Austria in no more then 7 business days with express shipping. It is a bit pricier though

[Matching armor paint to Anovos helmet]

I dont think 9010 is right. But didnt we have the very same discussion before? Used search but didnt find anything so here goes what i can remember:<br><br><br>

9010: yellowish tint, closer match to on screen armor, will not match the standard helmet (so will need repainting of helmet) <br><br>

9016: blueish tint, matches the anovos abs helmet but less accurate<br><br><br>

So please tell me that this is correct as my armor is currently at the paint shop, going full 9016

[Rogue One Shoretrooper]

I suggest moving this to the new R1 subforum

[Matching armor paint to Anovos helmet]

Everything RAL 9016 and you are good to go. It matches pretty nicely.

[Rogue One Death Trooper Build Thread]

That "used look" on both, Death and Shore Trooper ... i love it.

[Clint's FNArmour Analysis]

Thanks for your work, it has shed some needed light on this issue.

 

I wasn't aware of it, but Jim has pointed out that a image they use on the fnarmor website is of his v2 armor.

[Rogue One Shoretrooper]

Sorry, who is SBG?

[Star Wars Celebration Europe 2016 IPM Insider]

WOW! I love them new armors! The new TK bucket is awesome!

[Fan Made ABS FOTK armor]

You are correct, i shouldn't have posted that. I apologize.

[Fan Made ABS FOTK armor]

It just doesnt seem honest when people raise their hand and say "yes i can do the requested comparison" when they really can't and the motivation seems to mainly be to get a free suit (For the record, i think the suit is in the right hands with Q). Nothing to do with the detachment.

[Fan Made ABS FOTK armor]

I agree with Lichtbringer. No one asked for "evaluation" or "review" of those kits.

[FNarmour build thread]

Glad you are getting to build another one, Evin. However i think the armor should have been sent to someone who can compare it to different kits, which was the original purpose of those freebie armors.