-
Posts
714 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Novak Dimon
-
-
Woohoo
That’s a great looking armor!
Great work!
-
The only cooling I ever needed is one in the helmet for fresh air support.
If your armor is not too close-fitting every light breeze will go through your armor and effectively cool you down.
-
There is no finish you can damage or remove. It is all simple ABS.
I would be careful while wet sanding the damaged area because everything you sand needs to be polished afterwards.
Once you use the level 3 polish it makes sense to include the surrounding area to remove any borders.
-
If you start polishing the ABS, the paint will come off naturally.
You can use Novus 123 polish. It is well known here for great results.
You get three bottles with polishing Fluid to go from rough to mirror like shine.
Oh, I didn’t type quick enough.
- 1
-
Hi Dan,
great work with the frown. Looking great now!
About your Acetone accident: if the main part of the damage is hidden by the belt it is not that bad.
Did you try to polish the area to make it shine again?
Might look better than painting.
Cheers
Christian
-
Hallo and welcome!
At least you need to change the ABS belt against a canvas belt.
Velcro is totally acceptable to connect the belt to the armor but snaps are the more durable solution.
I would recommend to install a new strapping. The SDS strapping I know is crap.
Everything else is depending of your GML.
-
33 minutes ago, magni said:
I'm not saying Tony or Joseph would disqualify you for it. I'm sure they would recommend it since you're going the whole accurate route. A little clean up doesn't hurt the look and Anovos is known to need it.
Copy that.
-
I helped Mark to achieve EI and Centurion a while ago. Working on his brothers armor now.
-
23 hours ago, Erice3339 said:
Precisely what I was concerned with, although perhaps better articulated. Is it a disqualifier for Centurion?
I don’t think it is a disqualifier for Centurion. The CRL don’t mention it.
But the original helmets had mostly angular holes:
-
Congratulations for your BBB!
Your patience will be very helpful for the building process.
I would refine the cutouts of the teeth a little bit. The ones Anovos made have very rounded corners. I guess that are the „arches“ you mentioned.
I would make them more angular:
You can do that with key-files or a modeling scalpel. But be careful with the knife! The ABS is VERY thin there.
Cheers
Christian
-
Congratulations and welcome to the ranks!
Your armor is looking awesome!!
- 1
-
Hi Stefanie,
great job with your armor!
Perhaps you should shorten the left thigh armor a little bit. It is looking a bit too long and I guess walking is difficult now.
Keep up the great work.
Cheers
Christian
- 1
-
Hello Cassandra and welcome to the FISD!
You don’t need to be nervous, you will meet lots of great Trooper here and we are happy to help you as much as we can to make your journey a complete success!
Best regards
Christian
-
Hi Stefanie,
you can buy the Novus polish here: http://schleifartikel.com/epages/2e19cdcc-93fc-40bb-bebf-e0fad7f64e67.mobile/de_DE/?ObjectPath=/Shops/2e19cdcc-93fc-40bb-bebf-e0fad7f64e67/Products/33&Locale=de_DE
You will see that the repaired spots will look like new after polishing.
Cheers
Christian
- 2
-
Congratulations Mark!
Welcome to the Centurion Ranks.
-
1 hour ago, troopermaster said:
I built this for Mark. The drop boxes ARE in the correct position and the original mic tips have been replacement with junk versions for some strange reason?
Mark replaced your Mictips against other ones with speakers... I‘m already after it to install some correct ones.
-
@Dainbrandr Try to reinforce the shoulder elastic with some stiffer fabric where the snap of the shoulder bell is located. This may prevent the elastic to move outward.
Alternatively replace the shoulder elastic by a stronger elastic.
Cheers
Christian
- 1
-
Best of luck for you Mark!
- 1
-
Congratulations! You did a great work with your armor!
-
Welcome to the ranks Mark!
-
Hi, great to see that the PayPal problem is solved!
You will love the RS armor!
- 1
-
Hi,
AP and RS are both great kits. Especially the RS helmet is replicating all the bumps and irregularities of the surface the original parts had.
If you prefere a more idealized look go for AP.
You can build both kits up to Centurion without any problems and about trimming: don’t be afraid. It is much easier than you think. Just do it.
Cheers
Christian
-
Good luck Mark... but I don´t think that you need it.
Soon we will start your request for Centurion.
Cheers
Christian
- 1
-
Had the same problem with a cheap one. A squadmate is using this type with voice activation without any problem: LINK
It’s quite expensive and you have to solder a new plug because it is coming with a connector for professional radio equipment, but it is working perfectly.
Cheers
Christian
Hey! from the Carolina Garrison!
in New Member Introductions Archive
Posted
Hi Taylor, welcome to the white zone.