Jump to content

sharkbait

Imperial Attaché[TK]
  • Posts

    850
  • Joined

  • Last visited

  • Days Won

    4

Posts posted by sharkbait

  1. 107. Fresno State Men's Basketball Star Wars Night, Fresno, CA - 1/14 (Phasma)

     

    52631535003_4e29f70150_o.jpg

     

    I kept trying to stand next to our short troopers, but I kept ending up next to our super tall troopers, haha.  For the record, I'm about 6'3'' - 6'4'' in costume.  But the TIE Pilot is planning on a Vader next (and the Gunner is also working on one), so they're forgiven!  :laugh1:

     

    It was our Biker Scout's second troop, and he came all the way down from RENO.  That's dedication right there.  

    • Like 1
  2. 27 minutes ago, revlimiter said:

    I hope my armor looks close to that good at 100.  You're an inspiration sharkbait.

     

    A testament to AM armor!  

     

    But if it makes you feel any better I do need to take it in for various maintenance projects I've been putting off because.... that's just what you do, isn't it?  The cover strips on the thighs and shins have yellowed significantly (I assume because of the sanding to make smooth while the main armor parts were already smooth or the sanding joints hidden by said cover strips).  And my temp fix from "get it approved, deal with it later" of 2016 on my lenses is finally failing- the tape and velcro is finally no longer adhering so maybe I should actually glue them in like I had originally planned all those years ago, :laugh1:.  I'm also going to replace my shoulder bell connections- the elastic is shot and one of the snaps is starting to pull through (though it did make it easier to get into it by myself, normally I have someone snap those for me).  It could use a good polish and I'm pretty sure there's still remnants of a "special guest" sticker on one shoulder bell from... many troops ago that I keep forgetting about and not removing.

     

    I cannot complain, over all!  

    • Like 2
  3. :dancing-trooper::happyandcheerfulbirthday: 100th Troop in the ESB TK Armor! :dancing-trooper::happyandcheerfulbirthday:

     

    106. Central Valley Fallen Heroes Car Show, Clovis, CA - 9/24

     

    52389156754_706e40e212_o.jpg

     

    Well this one turned out to be a roller coaster!  It was supposed to be just two troopers, but I found out when I got there the second had woken up with the stomach flu.  So I said, heck, I'm here- I'll do it!  I suited up at my car and trooped completely solo for the first time!  Really glad I brought my TK (I knew the other guy didn't have a TK but was still costume TBD, so figured we gotta have at least one TK at every event, right?). 

     

    It was totally the right decision!  I didn't even make it from my end of the parking lot to the first branch of the show and I was mobbed by super-excited kids who wanted to take pictures and gladly high-fived.  I got a couple hugs, even!  Adults also went nuts, patrons loved it when they got a photo of me with their classic cars (and there were some fun ones, multiple late 60s Mustangs, which are my personal favs).  Don't know if I'd really want to do another solo troop again, but hey, if ya got to, ya got to!

    • Like 5
  4. 105. Weekend Blender (Fall), Clovis, CA - 8/20

     

    52303852959_b236c1b758_o.jpg

     

    On the left.  With a fellow ESB TK!  She found us and I helped her a lot in building and it was just so awesome to have another ESB.  We've only managed to troop together twice, but it's awesome when we do!  (We later trooped our Offworld Jawas together, we're the only two in the Garrison as of now (three more in the works) and we built them together, and it was her debut of it!)

     

    Oh ESB TK my old friend, how I have missed you!  It felt so good to be back in it!  And as I started walking around I immediately thought, "Wow, this is so easy to wear!" :laugh1:

     

    One more TK troop and that armor's at 100 troops itself!  

    • Like 2
  5. 104. Star Wars Night with the Reno Aces, Reno, NV - 7/30 (Phasma)

     

    Despite a rocky start (including NO HELMET FANS), this troop was an absolute BLAST!  I meet some new people from the Reno area, had a second-time handler assist me (and he rocked it!  He's working on a Galactic Marine for entry right now), saw some old friends from up North (some I'd just seen at Rivercats, but always good to see them again), the kids and crowd in general were just SO into it (all of us, but I really saw it directed at me and I got a whole lot of actually being called "Captain Phasma" which is just always great- so many high fives, so many excited patrons.  I walked out from the back break area and a group excitedly yelled "Captain Phasma!" and I managed to raise my arms to cheer and we got photos together.  I beat my record for hugs at a troop!  Some of them might have been the same kid, but I couldn't see well enough to tell, haha- I had eight (previous record was three)!  Then in the changing room when we were suiting down, I told the others this and one jumped up immediately and hugged me and said "Nine!" and then another jumped up and said "even number, ten!" and hugged me too.  :laugh1:  I love my Garrison-mates.  

     

    My rocky start included the venue changing our room last minute, and me not getting the message (despite being early, unfortunately), so I was headed to the changing room (across the street, no less) as they were doing the Parade of 501st walking into the stadium.  Whoops.  So I scrambled to get suited up and as I'm trying to adjust my fans, one pulls completely from the wires, so I have only one fan.  Not a big deal, I've done one fan troops before.  It's about 100F so it's hot but we're in the shade on the concourse, right?  The second fan suddenly won't turn on.  Then I notice the wires are getting really hot.  And there's now smoke starting to come out of the battery box.  No fans for me.  Which actually worked out just fine- I could hear a little better and most importantly my lenses didn't fog up at all.  The air was a little warm in there, but there was nice breezes so overall, it was a hot troop, but I wasn't dying.  

     

    Alan Fernandes!

     

    52258925276_d58345ec9d_o.jpg

     

    He was there to throw out the first pitch and sharing our changing room.  Super nice guy!  I got a super fun compliment from his assistant who said "Wow, it's already impressive and it's just laid out on the floor!" when I was pulling Phasma parts out of the bin in a hurry.  They wanted pictures with me and that too was a huge compliment.  And of course I had to get one for myself, as well.  (I guess he's represented by one of our members who's in that industry, he also reps a couple of Jawa actors).  

     

    52259204594_2bd0e49048_o.jpg

     

    I like to say the irony of me doing all this costuming is mascots and people in costumes used to terrify me as a child, and now here I am.  I am very sympathetic when kids aren't sure about us and know when I can push it a little and ease them with the offer of a high five and when to back up a bit.  That said, these mascots kind of terrify me.  I legit have NO idea what either of them are, :laugh1:.  

    • Like 4
  6. 103. Star Wars Night with the Sacramento Rivercats, Sacramento, CA - 7/16 (Phasma)

     

    We didn't get a full group shot but we had a great turnout!  Such a fun event.  Even if it was 106F out.  Maybe 104F by the time we were actually trooping.  Hot.  We all survived!  Our Vader was a rockstar and out for a long time, we had a Tusken female, kid Jawas (one of which who was dancing, so, kudos, kid, you didn't pass out, I'm impressed), kid Shadow Scout, a just-approved first troop in Boba Fett (and he looked awesome), and a smattering of old friends and Rebel Legion, too!  Good times!  

     

    52225197648_a2de1f1ab3_o.jpg

     

    She just looked so pretty in the lighting!

     

    52225170251_c606be6af7_o.jpg

    • Like 3
  7. 102. Star Wars Night with the Modesto Nuts, Modesto, CA - 5/14 (Phasma)

     

    52085516155_220fd8e70c_o.jpg

     

    I finally got to troop with a Kylo!!  He was excited to finally troop with Phasma, too.  We all braved the 96F heat and no one passed out!  It was a win.  And it looks like we're holding hands in this photo and that also cracks me up.  

     

    I need to add velcro (or figure out a better magnet situation) to the finger tips/gloves because a few of them just won't stay on.  Hence why my fingers are curled here.  But I did adjust the velcro placement for the gaskets on the arms and legs and the shins no longer dig into my feet and the forearms don't eat the wrist plate as bad anymore (still needs a little tweaking, but way better) and also doesn't dig into my wrist.

    • Like 5
  8. WHAT I THOUGHT WAS MY 100TH TROOP BUT I TOTALLY SKIPED ONE SO IT WAS ACTUALLY TROOP #101 :laugh1:

    :happyandcheerfulbirthday::dancing-trooper:100th FISD TROOP!!!!:dancing-trooper::happyandcheerfulbirthday:

     

    101. Star Wars Night with the Fresno Grizzlies, Fresno, CA - 5/6

     

    52060842832_9e79eca469_o.jpg

     

    52061882541_5b53ba5b29_o.jpg

     

    This one cracks me up because I keep thinking it looks like I'm flipping the camera off.  I'm waving to the crowd, there were some excited kids in the front row. :laugh1:  Still waiting on the photos from our other handlers, so if any standout I'll update the post to share.  GONK droid stole the show, unsurprisingly.  People though he was a prop until he'd start walking around.  It was also Vader's first troop (in Vader, he's got a Royal Guard and a Nihilus).  

     

    Great group of people, great troop, bordering on hot weather but not boiling like in some years past (seriously, we've done this troop in 100F+ weather before, not fun!)  Phasma continues to have a couple of kinks to work out, but they are in progress and overall, she's actually not too bad to wear!  I still tap out at about the two hour mark, but I think that's solid.  (I switched to Rebel Scum OT X-Wing for the second half of the night, and had a blast, little girls were really excited to see Iden Versio, me and a female Jedi wondering around).  Even did an interview for a local news channel!

     

    And I finished my new FISD patch shirt just in time for the occasion!

     

    52062375580_60a55c3d30_o.jpg

     

    52061882516_f110c9771a_o.jpg

    • Like 7
  9. There were a couple of tweaks done, and a few more "final" thoughts and advice:

     

    I used black electrical tape for the black indents on the biceps, forearms and ab box:

     

    5ufkMNg.jpg

     

    wPc1k3r.jpg

     

    l1mbJgv.jpg

     

    The wrist guards are there, they just like to slip under the forearms.  I'm working on a fix for that.  Basically it will be keeping the forearms (and therefore biceps) up high enough so they don't slide down and slide over the wrist guards.  

     

    raQwv0h.jpg

     

    She's SO SHINY AND REFLECTIVE.  

     

    Kyr7GDz.jpg

     

    My stupid belt boxes came off AGAIN. Well, two of them.  The Chicago screw idea is great, if it works, and it has for the smaller rectangle boxes/horizontal that are flush with the belt have been fine, it's two that are vertical that get bumped and moved.  I'm thinking velcro.  Just sew some onto the belt, glue onto the back of the boxes, my velcro is good so it should stay for a troop.  If it pops off in the box or while dressing, oh well, that's easy to deal with.  

     

    When you suit up and take photos you realize how much of this costume is covered by the cape.  So much hard work just hidden! 

     

    If I notice any trooping tweaks I'll continue to post and update.  So far I've just walked around the house a bit.  Still in the getting used to it "don't trip and fall on your face" phase of slow, calculated and stiff movements.  

  10. Well… as you might have guessed by my dropping off the radar for the past few months that things didn’t go as planned. 

     

    She wasn’t approved.  The paint was deemed “too aluminum.”  The fit, it was remarked, was perfect, it was just the paint.  “Just.” 

     

    2020- the gift that keeps on giving.  Seriously, so many things, worldwide, state-wide, local and personal, first the world imploded around me and then my life imploded.  Just ugh.  Screw. This. Year. 

     

    I wrote at least five drafts of an update, edited them heavily, and deleted them without posting.  I really struggled with what to say and how to say it.  I even drafted a sales post for her, but I deleted that, too. 

     

    The moral of this story and the tl;dr version is this: You have to shell out for the spray chrome: it’s the price of entry.  Know this from the beginning, budget it in from the start and you’ll go far. 

     

    I’ve come to the conclusion based on others’ experiences that Al-Clad is not great for longevity and will likely need to be re-done as much as once a year.  For that reason, I don’t recommend it.  (If a Shiny Sister or Brother in the future cracks this code and makes it work, then by all means, disregard this,  but as of now, and my own experiences and knowledge, I don’t actively recommend it). 

     

    I ended up sending her to Chrome Factory, LLC in Las Vegas.  I couldn’t let her beat me.  I’m just too stubborn.  Never underestimate how stubborn I am. 

    I am mostly happy with CF.  I am a bit hesitant to recommend them based on my experience, but I haven’t written them off completely.  I would perhaps look into the spray chrome place back East (I forget the name, but other Phasmas have used them). 

     

    The Good:

    The spray chrome is beautiful.  It’s incredibly reflective, it’s chrome, it’s pretty durable- fingerprints and smudges aren’t automatic and rub off very easily, light scoots across the hardwood floors don’t scratch it up, scraping away dried liquid latex with various household brushes, fingers, and fingernails didn’t do anything to the chrome underneath (speaking of the blasters here, more on those later). 

     

    The price was reasonable ($1.5k for spray chrome (plus $200 for old paint removal/prep) which is from my research, a good price if not the industry standard). 

     

    He’s done several other Phasmas before and also Cylons from Battlestar Galactica.  He knows his way around costumes and the lingo and unique challenges that goes with them. 

     

    The Bad:

    I felt a few parts were bit sloppy and two sets of pieces were completely missed (yet they were wrapped up meticulously in plastic wrap like all the other parts, so it should have been noticed.  I admit I have high standards.  (Photos of all this below).

     

    Despite me telling him about four or five times (in writing, we were conversing via e-mail) that parts of the blasters were to remain black- they returned entirely chromed. 

     

    The communication was good in the beginning, but broke down later (which, at this point, I’m just convinced in a prerequisite to be a 501st level vendor as I hear it like a broken record so often across the board with rare exceptions).  I am mostly willing to blame COVID for a lot of the following issues:

    It was supposed to be a timeline of 4 – 6 weeks.  I was fully excepting and okay with 6 – 10 weeks.  After the six week mark, I started messaging him asking for status.  It was always “done and ready to go” and was going to go out that Friday/that Monday/within a few days.  We did this about three times, but no BBB on my doorstep and no tracking.  The last time I asked if there was tracking for that last “I shipped it,” I never got a reply, but about four days later I had my BBB on my doorstep. 

     

    Like I said, I’m mostly willing to blame COVID as this was all happening in late March/April when things really started going down.  He was unable to work and tired to, got caught, kicked out of the shop for a while, there was a gap before he could get back in, etc.  I wouldn’t worry too much about this if you send it in in the future, assuming we don’t go on full on lockdown again.   

     

    The riffle also arrived to him  broke, he fixed it, and it was broken again upon return to me.  I stuck a dowel in it and re-glued it and I think that will do the trick now that it’s not being shipped anymore.  (I believe this is a design issue, not the fault of CF). 

     

    Toes and knees were missed, but will probably blend overall (laying it all out on the floor together they seem to kind of meld in). 

    50320816902_2545ac6ab8_o.jpg

     

    Smudge/scrape on bottom of inner shin.  On the inside, so I’m not worried.

    50320641281_0261c678cd_o.jpg

     

    Drip on the front of the shin.  You can really see the reflectiveness of the chrome here, considering you can nearly make out my phone case.  (It says “I am SHERLOCKED” in case you were wondering, for all my fellow BBC Sherlock fans). 

    50320641186_bc1830580e_o.jpg

     

    Underside of the helmet not chrome. 

    50320816617_bb5a1e6040_o.jpg

     

    Further changes, updates, and projects for completion:

     

    I fixed the riffle as I said, with the dowel down the body shaft and into the butt stock.  I punched a hole for the dowel with my soldering iron and used a combo of E6000 and CA Glue to glue it back together. 

     

    I used liquid latex again to mask off all the blaster parts to remain chrome and hit them with a coat of sandable primer and then glossy black.  Liquid latex still sucks to get off even if it’s not weeks later.  Which, by the way, don’t wait weeks, it’s a damn nightmare.  Though waiting just long enough for the paint to dry (in 100+ F degree heat) and then trying to peel it off was only marginally better, so… just know you’re in for a challenge, thumbs rubbed raw and you’ll need patience.  I also found a scrub brush like for the kitchen sink worked decently well in loosening and taking up the last bits.  You do have to put muscle into it regardless. 

     

    I’ll be touching up any black parts that scratched off/got missed with some black acrylic paint. 

     

    Riffle mostly done, still some more latex to clean off.  That stuff is stubborn, as you can see by the large pile of tiny scraps. 

    50320816527_2e1ee2b17c_o.jpg

     

    Pistol is also mostly done, looking a bit better than the rifle, probably because it’s smaller and had less to deal with. 

    50320816367_2dc99653b1_o.jpg

     

    I tightened the neck opening on the cape, just added an extra fold and sewed it down (it was just slightly big and showing a bit more shoulder than was ideal).  I really love this cape. 

    50327290757_5f87d6bbfa_o.jpg

     

    I tightened one shoulder connection. 

     

    I added a Mr. Clean Magic Eraser (which I keep around for Jawa masks) into the front of each ankle spat for stabilization. 

    50327291187_7e62613612_o.jpg

     

    I added the lens back in the helmet (I removed it for chroming purposes). 

    50327110581_d477c8db51_o.jpg

     

    I re-added a couple of Velcro connections I had removed for chroming- back to chest, yoke to chest.  E6000 does not really like the chrome, so I roughed up the connection to help it adhere.  I’m not entirely sure the yoke/chest connection will work or hold, so I might end up with a snap set up.  We’ll see.  If I were doing it from the start again, I’d probably just work out a snap set up and be done from the start.

    50326446743_cb8686d119_o.jpg

     

    A couple of the Velcro connections for the gaskets inside a bicep came loose, so I re-glued it with a combo of E6000 and CA Glue.  I also think I’ll try and remove the gaskets only when I have to.  Less stress on the Velcro connections plus easier to get on and off.

     

    I ditched my second set of gloves (Nomex) and swapped them for stretchy compression ones (like we use for Jawas now), because the Nomex were just a bit large in the fingers and were too tight under the armor.  They were kind of painful and putting my hands to sleep.  I re-added the Velcro attachment to the palm for the fingers.  I was smart this time, and split the seam to better access the palm.  The fingertips still want to pop off, so I think I might need to add a bit of Velcro or try a stronger magnet on the outside of the glove.  The magnets are still in the inside of the fingers from the first failed attempt. 

    50327291142_c8b74cdf92_o.jpg

     

    I also fixed a crack in the side of the abs

    50326446648_0f206796c9_o.jpg

     

    50326446548_d291da422c_o.jpg

     

    Third Time’s the Charm Approval Photos:

    Gs7RKTP.jpg

     

    fyzeanq.jpg

     

    hV5fX57.jpg

     

    qfFBi0J.jpg

     

    GIKZ83J.jpg

     

    CmezZaC.jpg

     

    Wish me luck, again!  It’s 2020 so we can all use all the luck we can get. 

    • Like 5
  11. On 7/6/2020 at 12:19 PM, indiechixor said:

    Hi all! I've been talking about making a Phasma kit since TFA came out. I've love Phasma and her story, and finally pulled the trigger on buying a KB Prop kit! 

     

    I have a 3D Printer and plan on making a TLJ version Baton.  Super excited to join the group!

     

     

    Awesome!  My Phasma is a KB as well. I have a Jimmy helmet (and also a Thorrson helmet, but I'm using the Jimmy for the actual costume).  Feel free to ask me any questions.  My build thread is up here in the Phasma build threads as well (and she's TFA, too).  

×
×
  • Create New...