Jump to content

ravinousbunny

501st Stormtrooper[TK]
  • Posts

    86
  • Joined

  • Last visited

Posts posted by ravinousbunny

  1. I noticed that about the stripes. Happened to pause right on that and was like that is interesting.<br><br>

    For a neck seal I recommend Darman. He has a listing under ongoing sales that I believe is pinned. Good quality stuff with a few options to pick from and good pricing. That is where I've bought all of mine.<br><br>

    For a balaclava I have the UA HeatGear tactical hood. The mask covering is a seperate piece sewn on so it gives good range of adjustment and is super comfy.

  2. I know that I had a few cracks in my ANH helm and repaired that on the interior by tacking a little ca glue to hold the joint.  I then took canvas cloth and soaked in e-6000 and then pressed on the inside against the crack.  This worked so surprisingly well on my ANH bucket and fixed up the small cracks I had and helped to reinforce the inside as the bucket was quite weak from a thinner plastic.  I imagine something similar to what I did would help reinforce, I think some people use cheesecloth and fiberglass resin though double check.

    I agree with Greg on drilling at the end of the crack to the edge.  That should give a nice curve to avoid the crack from spreading more and some sort of filler to clean it up.

    My opinions on these though, so take that for what it is worth haha.

  3. The CRL is referring to a snap that goes on the top right of the ab section.  This image is on the site here, the stormtrooper on the left you can see the snap present right near his arm.  That snap has a piece of elastic to the kidney.  That is the one that you must be able to see.
    ----------

  4. Measurements really only affect if you are getting someone to assemble armor for you as they would need a reference of your size to make sure it fits.  Most armor comes as a kit that needs to then be assembled to the users needed dimensions.  So unless they specifically state they need it or ask for it then it will most likely not be necessary.  Though you can always ask or just send them in anyway if you are worried.

  5. The top can be tricky to find sometimes.  I use a plain old starter top I managed to find at a walmart, though I will replace this soon.  Trooperbay appears to have tops though I have no experience with the product and can't comment on what it is like.  I also had under armour heatgear compression pants that I swapped for a pair of yoga pants my girlfriend can no longer wear, they work quite well surprisingly.  Will go back to something under armour like, finding one without a logo that gets in the way or one that is plain black can be difficult so keep that in mind when you shop and an eye out for anything that may negate them from use.

  6. Hi mate, so this is actually my listing on eBay.

     

    This was my first build from last year which does have some issues with it, some obvious, some not as obvious, all fixable I should think. The reason I'm selling this is because it's just been sitting tucked away in a box for ages and I have absolutely no desire to finish or fix it so thought, oh well, may as well sell it. I've tried to be as descriptive as I can in the description but I'm bound to forget things so if there are any issues I'll happily change it. I'll see if I can address some concerns :)

    You are correct they are fixable.  No point for keeping for sure if its just sitting in a box.  I thought the description appeared to be a bit more informative than what you usually see, as for forgetting things we all do, no one is perfect, haha.

     

    The reason for the price is mainly for the eBay fees as they take 10% from the final selling price which is a fair bit (the shipping cost hurts a bit as well). I've now updated the price to perhaps a fairer price even though it puts me at a loss from what I paid for the original kit.

    You did not have to change the price based off of this topic.  I get the fees from ebay.  Most of the main armorers are selling direct and payment through paypal which helps on the fees and keeps prices a bit lower.  Unfortunately for the individual seller, that is not exactly a good solution, so I totally understand.  Honestly sell it for what you want to get out of it, not what some random guy said on a forum post!  I also live in the US, so I forget that availability for armor may be more limited in the UK, correct me if I am wrong because I don't know that for a fact just that there is a bit of selection for US and Canada sellers.

     

    Unfortunately, the kidney and butt area didn't have return edges when I got the kit, it was all one piece :(

     

    I totally understand this =/ it just helps with the butting of the back, kidney, and butt.  Can't help how it was made though.

     

    Apologies if I've offended anyone in any way with the listing, it was not my intention to do so and I can take it down if required to do so :)

    No you did not offend anyone, and I mean no offense either.  Just offering my own opinion on something listed.  Seriously take it as that, just an opinion.  Hopefully you do not think I was trying to put you down at all!  I see nothing actually wrong with the listing that would be breaking any "rules".  The listing is really descriptive with good pictures plus points for adding the front of the legs as well.  Most listings are vague and say movie replica stormtrooper.

  7. Yea def a no go.  The helmet sticks out the most, it is way bad.  The details on the whole kit are real soft and the helmet is super bumpy and not clean at all with poorly applied decals as well as the cap appearing to be leaning to one side.  Also the bottom back right of the helmet either appears deformed or just not trimmed correctly and makes for a weird shape.  The whole armor has real soft details and is just not there with the quality.  The body pieces appear to be super thin with missing return edges which takes away from the overall look in my opinion for the body pieces especially around that kidney and butt area.  Plus the price tag is insane for what you are actually getting.  You can find cheaper with a lot better quality.

    Arms look ok from pictures, though not ideal.  Not a good enough picture or view of the legs to make out anything really.  I wouldn't say I am an expect my any means however, so these are strictly my opinion and just based off of what I have seen and know.  So take it as that, haha.

  8. When you refer to flex a bit do you mean from leaning backwards or to the side?  Naturally with the plate being attached from the inside if you lean forward they flex fine with limitations of course.  I wouldn't expect to do much flexing in TK armor to begin with though, we are known for our intense lack of mobility.  I would say to just get them as close as possible, pretty much touching.  I don't know that there is an actual "acceptable gap width" listed anywhere.  CRL does not specify this.

  9. Well I just ordered some rivets to attach the belt to the thigh.  It also includes the split rivets for the ab and kidney (not sure if I will use them).  I have the belt assembled just need to attach the holster and drop boxes.  Need to figure out exactly how I want to attach the holster.

     

    Things left to do...

         -Attach box onto thigh

         -Get boots from somewhere

         -Attach Holster to belt (thinking about using chicago screws)

         -Attach drop boxes to belt

         -Paint ab buttons

         -Attach ab buttons

         -Add extra strap from kidney to butt for better security

         -Add strap from cod to butt

         -Add something to hold back of shoulder straps down (not going completely screen accurate here)

         -Put fan kit into helmet

         -Assemble TD pipe (need screws for clips)

         -Tighten ab and kidney.  Need to close up the gap I have there, about a 1/2 - 1 inch (think I trimmed to much off of the Ab to do this)

         -Add another strap from thigh to belt to cover under armour logo on pants

     

    That is all I have left to do.  Seems to be maybe an hour or two worth of work! 

     

    Still need boots...  Working on this, it kind of has demotivated me from finishing the little things since the armor seems to not be much without the boots just like not having a wearable helmet.

    Really just hoping something comes through on the boots.  Might just end up having to wait for TK boots to get some more.  I will prob finish everything once I can get the hardware to attach everything!

    Once again I am still stuck from getting approved without boots, so it seems I have some time to kill, lol.

  10. From one of the pictures it looks like you have a decent bit of extra room in the bicep?  Maybe I am wrong, please let me know!  If you do have the extra room maybe take the biceps apart and take some excess off of them.  I believe that will bring the outside of the bicep closer in and allow the shoulder bell to come closer to your body and shortening the strap the shoulder bell is connected to.  It seems like the bicep is what is keeping it out there partly.

     

    If no excess room in the bicep just shorten the strap to the bell?  That would bring it up more and cause the bottom of the bell to level out and sit closer to the body and more flush with the bicep.  You probably already tried that I assume.  Just giving my 2 cents worth haha.

  11. Looks great!  Where did you get your blaster??

    I got rreally lucky with the blaster, a guy in the Carolina Garrison happened to put one up for sell at the time I was looking.  It is just a modified Hasbro blaster with a doopydoo kit.  Once again really lucky to catch the guy at the right time.

     

     

    Looking good so far. Nice to see the bells fit on you - you skinny people!  ;)

    Haha!  The bells do fit pretty good!  The whole armor shrouds my body and makes me look pretty buff :P  Think I might have trimmed to much off of the chest, but we will see when I get the belt situated.  I def went to your thread a lot for some ideas and some guidence for things!  It was nice to see pics of the exact kit I had for some of the details.  So I appreciate you taking the plunge first on the NE before me.  The empire thanks you for your services!!!  As do I! :salute:

  12. Ok so for a really really really long needed update haha.  I have finished all of the trimming and gluing and strapping for the hard armor!!  :D  Just did a test op, no neck seal or bottom suit yet, and everything fits pretty good!  I have a lot more mobility than I would have thought with it all on actually, may need to adjust thighs.  I also think I will have to trim the shins up maybe an inch, though I wont know for sure until I get get my hands on some boots.

     

    I still need to do the following...

     

    Assemble belt, canvas belt and rivet gun will be here tomorrow.  Holster will arrive with neck seal from Darman.  Will prob need to adjust belt size (not sure how to go about it)

    Assemble drop boxes.

    Assemble TD pipe, still need clips, will buy within a week or so.

    Attach sniper plate to shin.

    Rivet pack on right thigh. Also trim the corners.

    Get some boots!

    Glue elastic on hand guards to wear over gloves.  Sticking with the plastic hand guards for now.

    Order under armour bottom.

    Will probably attach back of shoulder straps to armor for a better look (not worried about complete screen accuracy here)

    Add strap from crotch to butt, may need to trim crotch more.

    Trim and paint ab buttons, still need paint for this.

    Need more snaps/velcro on outer part of butt to help form better with kidney

    Need to add foam inside forearm, also adding snap from bicep to forearm.

     

     

    PICS PICS PICS!!!!!

    Does this armor make my head look big??  Well actually no it makes my head look super tiny, even though I have a pretty big head haha.

    It is very hard to take good pics of myself and display the armor.  Should have better pics tomorrow.

    IMG_6287_zpsab9acccc.jpg

    IMG_6288_zps8700cdc8.jpg

    IMG_6289_zpsdd2400ff.jpg

    IMG_6291_zpsea123702.jpg

    IMG_6292_zps18ff5ee8.jpg

    IMG_6293_zps42547597.jpg

    IMG_6294_zps92133ee1.jpg

    IMG_6295_zpsf801d25d.jpg

    IMG_6296_zps4f68042c.jpg

    IMG_6298_zps752d96d5.jpg

    IMG_6299_zpsf9f21894.jpg

    IMG_6300_zpsfcf23cb7.jpg

    IMG_6303_zpsbcb2bc98.jpg

    IMG_6304_zpscb1a75b0.jpg

    IMG_6305_zps0cd407c1.jpg

    IMG_6306_zps1e988bd7.jpg

    IMG_6307_zps20ecc164.jpg

    IMG_6310_zps3392cf03.jpg

    IMG_6313_zps1d55475d.jpg

    IMG_6315_zps9d7142e7.jpg

     

  13. You can't be any worse off buying that than the poor saps who actually are bidding on this thing

     

    http://www.ebay.com.au/itm/Star-Wars-Stormtrooper-FX-M-Movie-Accurate-Costume-Armour-Prop-501st-Legion/151063489456?_trksid=p2047675.m2109&_trkparms=aid%3D555003%26algo%3DPW.CAT%26ao%3D2%26asc%3D29%26meid%3D8582076173254305437%26pid%3D100010%26prg%3D1013%26rk%3D1%26sd%3D141001735772%26

     

    That is an auction for only an FX kit...  You do not get anything with it besides the plastic parts and what they call "strapping".  Those poor poor people.

  14. So I believe it is time for a long awaited update!!  I have been building everyday since my last photo updates, just got lazy on getting on the computer being to busy building.  I think I have made tons of progress and in the right direction!! :D  I was finally able to start gluing and have gotten both biceps finished!  The left forearm will be finished gluing tomorrow and I will set the last glue for the right forearm tomorrow as well!!

     

    I have gotten strapping done for the butt, kidney, back, chest, and ab plate!  I still need to add the shoulder bridges and just placed the order for my belt!  I know that the belt will help everything sit better.  I have a really tiny frame and waist (29" or so) so the belt will be much added help!  With the help of my girlfriend I was able to get the torso strapping done!  The armor is made to where it sits on my shoulders and everything is connected down from there, this is surprisingly comfortable!  Still need to add the strapping from the cod to the butt.  I did not use split rivets for the left side as I do not have adequate space nor the tools to be able to accomplish such a feat.  Just getting all this wearable was such an accomplishment of its own.  Though I am pretty sure I might have trimmed a tad to much off the ab plate sides, not sure it will change to much though.

     

    I still need to get a neck seal, holster, under armor, boots, gloves, td clips, and fan (helmet is surprisingly hot after wearing and moving around for only a little while).

    I also need to trim the shoulder bridges before attaching those.  Need to get the shoulders, biceps, and forearms squared away for wearing.  Then start on the thighs and shins, ammo belt, and td pipe.  I have accomplished a lot, but still have quite a ways to go.  Though I think getting the torso strapped and sitting was going to be the hardest part, so downhill from here?  :)

     

    Now pics!

    IMG_6252_zps61fe1655.jpg

    IMG_6253_zps83bc7b0f.jpg

    IMG_6254_zps7328b162.jpg

    IMG_6255_zpsad364750.jpg

    IMG_6256_zps93176c84.jpg

    IMG_6258_zps5358c7dd.jpg

    IMG_6259_zpsf558357a.jpg

    IMG_6260_zps91c0030c.jpg

    IMG_6261_zps559de5e7.jpg

    IMG_6262_zpsf59df3e6.jpg

    IMG_6263_zps9361b627.jpg

    IMG_6264_zpsa1962ac1.jpg

    IMG_6269_zps9e33a81f.jpg

    IMG_6270_zps7ab6c5d9.jpg

    IMG_6271_zps1211065a.jpg

    IMG_6272_zps13b262a4.jpg

    IMG_6274_zps01235a5f.jpg

    IMG_6275_zpse8c433bb.jpg

    IMG_6276_zps36f5e793.jpg

    IMG_6277_zpsf6deb133.jpg

    IMG_6278_zpsd24c916d.jpg

    IMG_6279_zps1f6cc932.jpg

    IMG_6280_zpsb6800afd.jpg

    IMG_6281_zps7921fb12.jpg

    IMG_6283_zps7b391c62.jpg

    IMG_6285_zps4e7ab61a.jpg

    IMG_6286_zps289bdf66.jpg

     

  15. Someone correct me if I am wrong, but I do believe that no parts REQUIRE return edges, it is all personal choice and a matter of comfort and if you are using the original style strapping with the hooks and loops on the armor.  I would say since I am not 100% sure you can always leave on a little bit of an edge and trim it later.  Though on my build thread a guy made the comment saying that it was a matter of choice.  I actually trimmed of all the return edge on the tops of biceps and both ends of forearms.  I left it on the chest, ab, back, kidney, and butt.  Might trim some around the neck for comfort though.  Have not started on the thighs or shins.

×
×
  • Create New...