gmrhodes13

Personally for your saber build I'd do another thread. The "hero" helmets for the original film were not just stunt helmets assembled differently. They were completely separate molds (softer pull/details) giving them a slightly different look used both for the hero TK and the TIE fighter pilot. If you were to make the ATA into a hero, I would suggest taking the time to iron out the 4th and 5th tooth indents leaving only the three as well as opening up the eyes slightly larger. My modified ATA helmet so the last teeth impressions were removed Some great references and information starwarshelmets.com: http://starwarshelmets.com/original-ANH-hero-Stormtrooper-armor-helmets.htm Found your other thread here

Very nice, looking great

Spreadsheet on the differences between OTTK's https://drive.google.com/file/d/10tEVteIreh6AHMogW010cuH_Bf8TBfU6/view

Very nice, added to the Captain variant research thread

Looking forward to seeing your progress. Great how to here on adding images via a free online image host

Good luck with approval, hope you hear something soon.

Congratulations and welcome to Expert Infantry and the EI Honor Gallery

Good luck with approval trooper

Imperial Binders - Handcuffs References of different binders/handcuffs seen in Star Wars ANH ESB Another version on Chewbacca ROTJ TFA TLJ TROS, extra large for chewie Rogue One Andor Solo The Mandalorian Ahsoka Battlefront II Star Wars Outlaws Star Wars Jedi: Fallen Order - Star Wars Jedi: Survivor How to wear Disney Imperial Binders come with a clip Metal clip Some use pouches I used to make these 3D files https://www.etsy.com/listing/1200996154/cosplay-binder-holster-3d-stl-file Disney First Order Conversation on how to wear here Where to find binders info here 3D Files OTTK https://www.yeggi.com/q/star+wars+imperial+binders/ FOTK https://www.whitearmor.net/forum/topic/37433-first-order-handcuffs-3d-printable-files-available-now/ PLEASE NOTE the wearing of non approved props is entirely up to your GCO (Garrison Commanding Officer) and GML (Garrison Membership Liaison) so definitely check with them as some garrisons DO NOT allow the use of non CRL props. Currently there are no FISD CRL's with an option to use Imperial Binders - Handcuffs ( BUT there could be, if someone builds them as screen accurate and supplies photos and references )

They are seen quite often in a lot of media but never attached TFA TLJ TROS, extra large for chewie Rogue One Andor Solo The Mandalorian Ahsoka Battlefront Star Wars Outlaws

Hello and welcome to the forum, as an approved TK you can request higher access here will allow you to purchase merchandise Binders were never worn on the belt in ANH Another version on Chewbacca ESB And for ROTJ Disney binders come with a clip Metal clip Some use pouches I used to make these Conversation on how to wear here Neither ANH Stunt or ANH Hero have binders as optional extras in their respective CRL's NOTE the wearing of non approved props is entirely up to your GCO and GML so definitely check with them. Where to find binders info here

Hi there we do have an area for Pre Approvals but you can still get feedback in this post Looks like a few fitment issues: Chest is not covering the abdomen, tighter strapping perhaps You could even out the gaps between elbow and wrist, forearm very close to hand guards Belt could come down a little from the CRL: The top of the ABS belt shall sit at or just above the bottom of the central and vertical ab button panels. A slight overlap is suggested, but not required. Sniper knee plate is sitting under your thigh, adding some foam behind the sniper plate can usually help keep it away from the thigh. Also rotate the thigh to the front. You could also rotate your shoulders inwards. Looks like your drop boxes are not aligned with the end of the plastic belt Posterior gap, being pushed backwards, tighter strapping may help Thigh is not centered, has rotated Generally the shoulder straps should be mounted on the chest with 1 large tab and 4 to 4 1/5 small tabs Gap between back and kidney, tighter strapping perhaps The top of the TD should sit level (or slightly) higher than the top of the canvas belt. Detonator needs to be rotated to see more of the O detail, and also come down on the belt. Also check the detonator gaps Thigh and shin should be rotated so the cover strips are centered. Thigh rear cover strip on an angle Watch any overhanging coverstrips, they can catch on other pieces when moving around. You can take off the corners of the cover strip, cut at angle or rounded, users choice There is excess material around your shoulder straps, normally a few mm is all that is needed Can't quite make it out but check your teeth paint is not on the gums For Basic approval and above, Frown is painted gray and does not leave the teeth area. Eight total teeth on the frown are cut out. Please also note the taper on the ends of the frown. Mainly just some fitment issues, some of these items are for higher level approval your GML not require some of them, good luck with approval

Great news ,some info for you https://databank.501st.com/databank/Join_Us

Rogue One and FOTK use the same boots, they have a zip on the inner sides, Original Trilogy has elastic on both sides like your photo so not acceptable for Enoch Boots are above ankle height and the same style as the First Order TK. Chelsea type boots in the style of OT TK are not acceptable.

There's a few different ones. And not to forget this one

Hello and welcome aboard, here is a great thread full of even more info to help you on your way

Not one I've seen before but then I'm not looking on Etsy for armor, very soft details so it may be a recast of someone else's work. Pre trimmed by the looks, not always helpful for sizing, just a few things that stand out, cut belt corners too big, no sniper knee plate or shoulder straps in those photos either. Although it can be a little more expensive I would advise not to purchase from and stick with the vetted sellers, cheaper isn't always better

I find Do3d are not as accurate as other makers, most go for GA files, although I know this maker also has some mcflyprint3d Really depends on the makers licence for the use of the files, modifying for personal use should be ok but doesn't hurt to ask, the maker may either add your updates or modify the files himself. I'm sure others would be interested in the updated files.

You could go back to an earlier post in your troop log and edit it, (perhaps this one) BUT the problem there is the total of troops would be wrong for all your troops after that one and you would have to edit every post. Link to EDIT is in the top right corner of you posts. I think I would just add it to your next post and update the total

Unfortunately not at 15, you have to be 18 to join. There is a group for those under 18 called Galactic Academy http://www.galactic-academy.net/

You may want to add some white paint to the rims of the Hovi's Correct Aerators/Hovi-MIX tips are present. Screens used shall be of a wide type mesh, with the rim of the mic and the inside white or painted white. Also remove any paint on the gums Frown is painted gray and does not leave the teeth area. A total of 8 cut outs in the teeth area of the frown are present. Looking forward to seeing your other images Good luck trooper

Congratulations trooper and welcome to Expert Infantry and the EI Honor Gallery

Welcome aboard, looking forward to seeing the progress, good luck with the build