-
Posts
47 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Articles
Media Demo
Posts posted by Heinous
-
-
What tools do you use to trim the ABS plastic? I want to get everything I need for starting my RS armour.
Lexan scissors I've seen, curved and straight, on ebay but that's for the thinner plastic on RC cars.
I've got 1.5mm ABS. Sand paper I've got.
Thanks
-
Nailed it. Thanks Stephen.
- 1
-
Me and a friend got a set of RS armour in the black friday sales and they came together in the same box. I've ended up with two outer right thighs and two left inner thighs.
What other bits have a left and right side? I've got a bicep with thumb print for left side and there is not one for the right. I'm not sure about shins, forearms, shoulder bells or outer biceps.
We got it mixed up and want to get the right parts for each set.
Thank you.
-
Thank you. That is great help. What a detailed thread. With short cut links to various sections. Incredible.
- 1
-
OK I'll have a look at doing that. Before cutting and possibly not getting it looking like I hoped I will use black tape to replicate the undersuit to see it works.
Thanks for replying.
-
No one wants weigh in on the adjustment being allowed?
-
This is what the thighs look like from the back normally.
-
I would like to get a more accurate or better looking leg armour. It something that bugs me when I wear it.
This is how I look normally wearing it
I would like to reduce the size of the thigh armour. If I did this what is in the photo is that acceptable? I haven't cut anything yet only unstuck the E6000 and taped into position. There is a step at the top at the rear. Unsure if this is acceptable or if it isn't how to make it join up.
-
1. Peter
2. Flockton
3. TK 98311
4. A4
5. Andrew
http://www.whitearmor.net/eib/certificates/98311-eib.png
Thank you
-
gmrhodes13 built my armour and helped with ideas on how to tweak it for EIB. Thanks Q.
-
Couldnt of done it without Q's expert help.
- 1
-
-
Thank you everyone.
-
Thank you for taking your time to review. I'm very happy I'm approved.
I can definitely fix get the shoulder bells closer and the belt sitting a tiny bit higher.
Ab buttons I'll work on after those two previous things are fixed up.
I'll start on my Centurion requirements in the CRL.
Once again thank you to you and FISD team for your efforts.
- 1
-
Thanks guys. I hope they can look again before photobucket takes down my photos.
-
Welcome trooper. Always a great feeling when we get our dreams realised. Stormtroopers are the best.
- 1
-
Collector Zone toy fair - 23 August 2015
Star Wars day at Morley Rollerdrome - 7 May 2016
Channel 7 Christmas Pageant - 3 Dec 2016
Rogue One - 14 Dec 2016
Dream Night Perth Zoo - 17th Feb 2017
Teddy Bear picnic Perth Zoo - 12 March 2017
Surprise Entrance for Star Wars fan - 3rd March 2017
Kids Big Day Out Marquee Markets - 5th March 2017
OZ Comic Con - 25th and 26the March 2017
Connect Fair in Aveley - 2nd April 2017
Perth Supernova - 24th and 25th June 2017
-
Thank you for reviewing.
-
-
I didn't build the suit. I have no skills. I can't get the end caps off to be able to get the screws out.
I'll try and buy a correct thermal detonator already made in the future when I can afford it.
Thanks guys.
-
OK. Thanks for taking the time to review. Appreciated
Can't fix that inaccuracy. Ends are pretty much welded on and the screws have nuts on them.
Onto other projects
-
-
Do you want the blaster in the holster for the front and side pics?
-
Tools for trimming ABS
in Assembly, Mods, and Painting
Posted
I found using my dremel the ABS melts and balls up. Maybe I'm cutting too fast?
I was thinking of using lexan scissors on the 1.5mm.
Score and snap method I've heard about.
I'm would like an easy way to cut the parts that need a return edge and was thinking curved scissors might be good.